801544
8
Zoom out
Zoom in
Previous page
1/36
Next page
5
1
2
3
BACK
SCAN OK
CLR
d
a
b
ce4
5
6
SHAFT AND HANDLE
(1) ON/OFF BUTTON : It powers the shaft and handle on and off. It
works independently from the system box.
(2) BATTERY COMPARTMENT COVER
(3) IPTU SENSOR INPUT SOCKET
(4) GROUND BALANCE/PINPOINT AND RETUNE TRIGGER
This trigger has 3 functions :
1) It is used for automatic ground balancing. When you push the trigger
forward, the ground balance screen is displayed.
2) In non-motion modes, it is used to retune the device. In order to do
this, you need to pull the trigger once towards you and release.
3) In motion modes, it is used for pinpointing. You need to pull the
trigger towards you and hold it for this function.
(5) LED FLASHLIGHT : It is the headlight used for lighting the area you
are scanning while detecting at night or in dark locations. To activate
the LED flashlight, double click the CLR button on the handle. It does
not operate when the shaft & handle is off. It is recommended to turn
it on only when necessary since its operation consumes extra battery
power.
(6) SHAFT & HANDLE KEYPAD
a) BACK BUTTON : It has the same function as the BACK button on the
system box. It allows you to exit the current screen or to go back to
the previous one. In addition, it is used to remove the pop-up message
windows from screen.
b) CLR BUTTON : In detection and scan screens, press and hold this
button to clean the screen and to center the search coil (bring it to
the origin) on the screen. It also turns on the LED flashlight when you
double click it.
c) SCAN BUTTON : It is used to switch to the scan screen and to scan
over detected targets. Please read the section ''scanning'' for more
details.
d) WiFi LED INDICATOR : Indicates the wireless connection between
the system box and the shaft & handle. If the LED is lit red, it means
there is no connection. If it is lit green, it means they are connected.
e) OK BUTTON : It is used to confirm an action or to go to the result
screen after performing a scan.
INTRODUCTION TO THE DEVICE
8


Need help? Post your question in this forum.

Forumrules


Report abuse

Libble takes abuse of its services very seriously. We're committed to dealing with such abuse according to the laws in your country of residence. When you submit a report, we'll investigate it and take the appropriate action. We'll get back to you only if we require additional details or have more information to share.

Product:

For example, Anti-Semitic content, racist content, or material that could result in a violent physical act.

For example, a credit card number, a personal identification number, or an unlisted home address. Note that email addresses and full names are not considered private information.

Forumrules

To achieve meaningful questions, we apply the following rules:

Register

Register getting emails for Nokta Makro Invenio at:


You will receive an email to register for one or both of the options.


Get your user manual by e-mail

Enter your email address to receive the manual of Nokta Makro Invenio in the language / languages: English as an attachment in your email.

The manual is 5.71 mb in size.

 

You will receive the manual in your email within minutes. If you have not received an email, then probably have entered the wrong email address or your mailbox is too full. In addition, it may be that your ISP may have a maximum size for emails to receive.

Others manual(s) of Nokta Makro Invenio

Nokta Makro Invenio User Manual - Turkish - 36 pages


The manual is sent by email. Check your email

If you have not received an email with the manual within fifteen minutes, it may be that you have a entered a wrong email address or that your ISP has set a maximum size to receive email that is smaller than the size of the manual.

The email address you have provided is not correct.

Please check the email address and correct it.

Your question is posted on this page

Would you like to receive an email when new answers and questions are posted? Please enter your email address.



Info