Manual Nokta Makro Invenio Pro (page 32 of 36) (English)

801545

Zoom out

Zoom in

1/36

options and the word ''Saved'' will be displayed in green at the bottom

of the dashboard.

NOTE : You can open the 3D graphs you saved in the ARCHIVES and

perform all the functions above, later as well.

(4) DELETE

Once the result screen is saved, ''Delete'' will be displayed instead

of ''Save'' under 3D GRAPH OPTIONS. When delete is selected, the

warning message ''Are you sure you want to delete the data?'' as

well as the record number will appear on screen. If you press the OK

button, a progress bar will appear in a window. Once the progress bar

is full, you will see the message ''Data is successfully deleted!'' Upon

deletion, ''Save'' will be displayed again instead of ''Delete'' function.

DASHBOARD

This will show up when you remove the 3D GRAPH OPTIONS by

pressing the SETTINGS button on the result screen. The DASHBOARD

will display the date and time, the search mode, the frequency, and

the type of search coil used when the data was obtained as well as

the resolution of the graph.

If you press the SETTINGS button while the dashboard is displayed,

the 3D GRAPH OPTION will come back on screen.

If you wish, you can remove the DASHBOARD from the screen by

pressing the INFO button and view the graph in a larger screen.

On the right is a sample result screen obtained in the Ground Anomaly

& Cavity mode :

This is the initial top view:

This is the 3D graph that can be viewed 360° using the directional

buttons :

On the graph above, when you press the OK button, the below graph

appears showing the target ID :

This is the graph showing the scanned area from start to finish and

all the sweeps :

The INVENIO allows the user to view the 3D graphs of the detected

targets and analyze them.

Once you detected a metal or ground anomaly or cavity in the detection

screen with the IPTU sensor, and scanned over them in the scan screen,

you can now go to the result screen by pressing the OK button and

analyze the obtained 3D graphs of these targets.

NOTE : The 3D graphs provided in the result screen show the general

form of the target; it does not provide any details. For example, you

can see the approximate shape of a statue or a gun but cannot see the

details of these objects. The graphs of targets with square, rectangle,

circle or stick shapes will be more clear.

NOTE : In some cases, one side of a square target may appear longer

on the screen depending on the direction of your scan. Similarly, circular

shapes may appear elliptical.

NOTE : If you are using the INV56 large coil, the shapes of small shallow

targets may appear in a stick form.

When you go to the result screen, the top view of the target will be

displayed. When the 3D GRAPH OPTIONS are displayed on the screen,

to rotate the graph, you need to remove the 3D GRAPH OPTIONS from

the screen by pressing the SETTINGS or the BACK button. Using the

directional buttons, you can rotate the graph 360° and analyze it from

all angles (this is the ROTATE function). In addition, by pressing the PAN

ROTATE button you can switch to the pan function and by using the

directional buttons again, you can slide the screen right and left or up

and down as well as zoom in and zoom out the image.

ROTATE PAN

You can see the following data on the result screen :

(1) The signal strength

(2) The length and width of the signal (the estimated target dimensions)

(3) The scanned area and its dimensions

(4) The estimated target depth and target ID

(5) The estimated target shape

NOTE : If there are multiple targets in the scanned area, you can see

them all in the result screen.

The targets in the result screen are indicated by colors according to the

metal group they fall under just like in the detection screen. When you

press the OK button in the result screen, the color target ID bar at the

top of the screen and a pop-up window on the target will appear. You

can see the where the target ID falls on the ID bar as well as the target

ID and target depth in cms. or in inches in the pop-up window.

If multiple targets were scanned, each target will be displayed separately

on the result screen. To go from one target to the other and display the

target IDs and depths of each target, press the OK button.

When you are on the last target, if you press the OK button again,

you can see the start and finish points of the scan as well as all the

movements of the coil drawn linearly.

3D GRAPH OPTIONS

It is displayed on the left side of the result screen. If you wish, you can

remove it from the screen by pressing the SETTINGS button and the

DASHBOARD will appear on the left side of the screen instead (please

read the next section).

(1) SIGNAL PROCESS LEVEL

For some targets, the device processes the obtained raw data

sometimes in 4 levels and for some targets, sometimes in 5 levels and

provides the data obtained either in the 4th or the 5th level. Level 0

indicates the raw data. The user can view the data in each level using

the plus (+) and minus (-) buttons. In some cases, the data picked by

the device may not be the most similar one to the real target. Moreover,

in some cases, the raw data may be the best corresponding with the

real target.

IMPORTANT! The 3rd level of the signal process always shows the

data trained by artificial intelligence. For this reason, the artificial

intelligence options are not displayed at this level. For details, please

read the Artificial Intelligence and Neural Network section.

(2) RESOLUTION

It is used to increase the image quality of the 3D graph. The device

adjusts resolution automatically based on the size of the scanned

area. If you want to see the graph in more details, you need to lower

the resolution.

(3) SAVE

It is used to save the 3D graph to the archives. When you select Save,

the warning message ''Are you sure you want to save the data?'' will

appear on screen. If you press the OK button, a progress bar will

appear in a window. Once the progress bar is full, you will see the

message ''Data is successfully saved!'' and the record number. When

you press the OK button, the 3D Graph Options will disappear and

the result screen will be displayed. Once the result screen is saved,

''Delete'' will be displayed instead of ''Save'' function under the graph

RESULT SCREEN

Report abuse

Libble takes abuse of its services very seriously. We're committed to dealing with such abuse according to the laws in your country of residence. When you submit a report, we'll investigate it and take the appropriate action. We'll get back to you only if we require additional details or have more information to share.

Product:

Forumrules

To achieve meaningful questions, we apply the following rules:

First, read the manual;
Check if your question has been asked previously;
Try to ask your question as clearly as possible;
Did you already try to solve the problem? Please mention this;
Is your problem solved by a visitor then let him/her know in this forum;
To give a response to a question or answer, do not use this form but click on the button 'reply to this question';
Your question will be posted here and emailed to our subscribers. Therefore, avoid filling in personal details.

new questions and answers
new manuals

You will receive an email to register for one or both of the options.

Get your user manual by e-mail

Enter your email address to receive the manual of Nokta Makro Invenio Pro in the language / languages: English as an attachment in your email.

The manual is 5.71 mb in size.

You will receive the manual in your email within minutes. If you have not received an email, then probably have entered the wrong email address or your mailbox is too full. In addition, it may be that your ISP may have a maximum size for emails to receive.

Others manual(s) of Nokta Makro Invenio Pro

Nokta Makro Invenio Pro User Manual - Turkish - 36 pages

The manual is sent by email. Check your email

If you have not received an email with the manual within fifteen minutes, it may be that you have a entered a wrong email address or that your ISP has set a maximum size to receive email that is smaller than the size of the manual.

The email address you have provided is not correct.

Please check the email address and correct it.

Your question is posted on this page

Would you like to receive an email when new answers and questions are posted? Please enter your email address.

Info

Nokta Makro Invenio Pro Manual

Product: