801559
10
Zoom out
Zoom in
Previous page
1/32
Next page
7
QUICK GUIDE
1) Assemble the device as per the instructions on page 1.
2) Push the on/off button to turn on the device.
3) When the device is turned on, it will start in GEN mode.
4) To ground balance, push and hold the GB button and pump the search coil up and down
to 3cm (1.2'') above the ground until a beep sound is heard.
5) You can increase the GAIN if needed. Increasing the gain will offer you greater depth.
However, if the surroundings or the ground cause excessive noise in the device, you need
to lower the gain setting.
6) If the device receives a lot of ground noise in the GEN mode causing a disruption in the
threshold's stability, you can increase the iSAT value.
7) If the ground is highly mineralized causing the coil to overload, decrease the GAIN until
the ''Overload'' message disappears from the screen.
8) You can now start searching.
9) Since your device operates with the motion principle, swing the search coil right and left
maintaining 5cm (2") distance above the ground. If the search coil does not move, the device
will not provide any audio tones even if the coil is over a metal target.
10) When a target is detected, the ID of the target and its position on the ID scale will be
displayed on the screen.
11) Upon target detection, you can pinpoint the exact location of the target by pressing and
holding the PP button. The audio volume will increase and the audio pitch will also increase
as you approach the target.
10


Need help? Post your question in this forum.

Forumrules


Report abuse

Libble takes abuse of its services very seriously. We're committed to dealing with such abuse according to the laws in your country of residence. When you submit a report, we'll investigate it and take the appropriate action. We'll get back to you only if we require additional details or have more information to share.

Product:

For example, Anti-Semitic content, racist content, or material that could result in a violent physical act.

For example, a credit card number, a personal identification number, or an unlisted home address. Note that email addresses and full names are not considered private information.

Forumrules

To achieve meaningful questions, we apply the following rules:

Register

Register getting emails for Nokta Makro Gold Kruzer at:


You will receive an email to register for one or both of the options.


Get your user manual by e-mail

Enter your email address to receive the manual of Nokta Makro Gold Kruzer in the language / languages: English as an attachment in your email.

The manual is 1.86 mb in size.

 

You will receive the manual in your email within minutes. If you have not received an email, then probably have entered the wrong email address or your mailbox is too full. In addition, it may be that your ISP may have a maximum size for emails to receive.

Others manual(s) of Nokta Makro Gold Kruzer

Nokta Makro Gold Kruzer User Manual - German - 32 pages

Nokta Makro Gold Kruzer User Manual - Dutch - 32 pages

Nokta Makro Gold Kruzer User Manual - French - 32 pages

Nokta Makro Gold Kruzer User Manual - Turkish - 32 pages


The manual is sent by email. Check your email

If you have not received an email with the manual within fifteen minutes, it may be that you have a entered a wrong email address or that your ISP has set a maximum size to receive email that is smaller than the size of the manual.

The email address you have provided is not correct.

Please check the email address and correct it.

Your question is posted on this page

Would you like to receive an email when new answers and questions are posted? Please enter your email address.



Info