801557

Nokta Impact Manual

10
Zoom out
Zoom in
Previous page
1/40
Next page
Page 6
QUICK GUIDE
1) Assemble the device as per the instructions on page 1.
2) Insert the batteries by paying attention to +/- polarity.
3) Rotate the on/off switch located behind the device clockwise to turn on the device. This
switch also adjusts the volume of the device as well as the overload volume.
4) When the device is turned on, it will start in the DI2 mode and 14kHz operating frequency.
You can change the mode and/or the frequency based on ground conditions. For instance, if
you are detecting on wet beach sand, you may want to select the COG mode and a different
frequency. You can find more details on search modes and frequencies further in this manual.
5) To ground balance, push and hold the trigger forward and pump the search coil up and
down to 3cm (1.2'') above the ground until a “beep” sound is heard.
6) You can increase the Gain if needed. Increasing the gain will offer you greater depth.
However, if the surroundings or the ground cause excessive noise in the device, you need
to lower the gain setting.
7) Testing the device with various metals would be helpful for getting familiar with the
sounds produced by the device.
8) Based on the IDs of the metals you don't want to detect, you can adjust the Disc. setting
and ignore those metals. For instance, if you don’t want to detect ferrous metals with 00-05
ID in the DI2 mode, you can set the Disc. to 5.
9) If you are detecting in a very trashy area and the device is getting too many iron signals,
instead of Disc. you can use the Fe Vol. to lower or completely turn off the iron audio. This
will provide more depth.
10) You can filter out certain Target IDs using the Notch Filter and enable the device to ignore
these metals during searching or to provide an iron audio for them.
11) If you wish, you can adjust the tone break points of the device with the Tone Break
feature and change the frequency of the tones using the Audio Tone setting.
12) You can now start searching.
13) Since your device operates with the motion principle, swing the search coil right and
left maintaining 5cm (2") distance above the ground. If the search coil does not move, the
device will not provide any audio responses even if the coil is over a metal target (except
for the STATIC modes).
14) When a target is detected, the ID of the target will be displayed on the screen and the cursor
will indicate its position on the ID scale. (If you wish, you can adjust the ID Depth Level of the
device). The device will also produce an audio response according to the search mode selected.
15) Upon target detection, you can pinpoint the exact location of the target by pulling
and holding the trigger back. The audio volume will increase and the audio pitch will also
increase as you approach the target.
… 10 …


Need help? Post your question in this forum.

Forumrules


Report abuse

Libble takes abuse of its services very seriously. We're committed to dealing with such abuse according to the laws in your country of residence. When you submit a report, we'll investigate it and take the appropriate action. We'll get back to you only if we require additional details or have more information to share.

Product:

For example, Anti-Semitic content, racist content, or material that could result in a violent physical act.

For example, a credit card number, a personal identification number, or an unlisted home address. Note that email addresses and full names are not considered private information.

Forumrules

To achieve meaningful questions, we apply the following rules:

Register

Register getting emails for Nokta Impact at:


You will receive an email to register for one or both of the options.


Get your user manual by e-mail

Enter your email address to receive the manual of Nokta Impact in the language / languages: English as an attachment in your email.

The manual is 2.34 mb in size.

 

You will receive the manual in your email within minutes. If you have not received an email, then probably have entered the wrong email address or your mailbox is too full. In addition, it may be that your ISP may have a maximum size for emails to receive.

Others manual(s) of Nokta Impact

Nokta Impact User Manual - German - 40 pages

Nokta Impact User Manual - Dutch - 40 pages

Nokta Impact User Manual - French - 40 pages

Nokta Impact User Manual - Turkish - 40 pages


The manual is sent by email. Check your email

If you have not received an email with the manual within fifteen minutes, it may be that you have a entered a wrong email address or that your ISP has set a maximum size to receive email that is smaller than the size of the manual.

The email address you have provided is not correct.

Please check the email address and correct it.

Your question is posted on this page

Would you like to receive an email when new answers and questions are posted? Please enter your email address.



Info