11
on hold active on the other device,
press the multifunction key.
To switch between the active call on
one device and the call on hold on
the other device, press and hold the
multifunction key for about 2
seconds.
Turn lights on or off
By default, the indicator lights are
shown in all situations. To turn the
lights off in some situations (for
example, during a call or when the
headset is connected to a mobile
device), press and hold the
multifunction key, and slide and
hold the volume key down for about
5 seconds when the headset is
connected to a device. The yellow
indicator light flashes once.
To turn the lights back on, press and
hold the multifunction key, and slide
and hold the volume key up for
about 5 seconds. The green
indicator light flashes once.
Clear settings or reset
To clear all the settings from the
headset (including settings you
have defined with the Nokia
Accessory Setup Application),
switch off the headset, and press
and hold the multifunction key for
about 8 seconds. The headset beeps
twice, and the red and green
indicator lights alternate. After the
settings are cleared, the headset
enters pairing mode.
To reset the headset if it stops
functioning, even though it is
charged, connect the headset to a
charger while you press and hold
the multifunction key.
Troubleshooting
If you cannot connect the headset
to your compatible device, make
