297914
64
Zoom out
Zoom in
Previous page
1/103
Next page
IP passthrough overrides PC Suite — Select this to automatically terminate a PC Suite connection via data cable when you
connect your device to a compatible PC and use the Internet or network connection of the PC.
RealPlayer settings
To access streaming data, such as real-time audio and video, you must set network and proxy settings for the RealPlayer
application.
To modify RealPlayer settings, select Connections > RealPlayer settings.
On the Network and Proxy pages, define the following:
Connection timeout — Specify how long RealPlayer waits before reporting a network connection failure. Increase the time
if you frequently receive a time-out error.
Server timeout — Specify how long RealPlayer waits for a response from the media server before disconnecting.
Port range: — Specify the port range that is used for receiving data.
Use proxy: — Select Yes, if your Internet service provider requires that a proxy server is used to connect to the Internet.
Host address: — Enter the proxy server address.
Port: — Enter the port number of the proxy server.
Security
Go to Desk > Tools > Control panel > Security.
Device security
You can modify the security settings for the PIN code, automatic locking of the device, and changing of the SIM card. You can
also change the PIN code, PIN2 code, lock code, and barring password.
Avoid using codes that are similar to emergency numbers, such as 112, to prevent accidental dialling of the emergency number.
Codes are shown as asterisks. When changing a code, enter the current code, and then the new code twice.
Defining device lock settings
Important: In offline profile you cannot make (or receive) any calls, or use other features that require GSM network
coverage. To make any calls, you must first activate the phone function by changing the profile. You may, however, be
able to make an emergency call in offline profile by pressing the power key on the cover of the device and then entering
the official emergency number. This can be done using the cover phone interface only, not the communicator interface.
If the device has been locked, enter the lock code to activate the phone function. When the device is locked, calls may
still be possible to the official emergency number.
Making an emergency call in offline profile or when the device is locked requires that the device recognizes the number
to be an official emergency number. It may be advisable to change the profile or unlock the device by entering the
lock code before you make the emergency call.
To define device lock settings, select Security > Device security, and select the Device lock page.
Define the following:
Autolock period — You can set a time-out after which the device is automatically locked and can be used only if the correct
lock code is entered. When the device is locked, calls may still be possible to the official emergency number programmed
into your device. You can also answer incoming calls.
Lock code — Press Change to change the lock code. The new code must be 5 to 10 digits long. The preset code is 12345. To
avoid unauthorized use of your device, change the lock code. Keep the new code secret and in a safe place separate from
your device.
Lock if SIM card is changed — You can set the device to ask for the lock code when an unknown SIM card is inserted into your
device. The device maintains a list of SIM cards that are recognized as the owner's cards.
Allow remote locking — If you set this option to Yes, you can lock the device by sending a predefined text message from
another phone.
To create a remote locking message, select Security > Device security. Set the option Allow remote locking to Yes, enter your
lock code, and enter text for the remote locking message in the Message field. Confirm the message, and press Done. The remote
locking message is case-sensitive and can be 5 to 20 characters or digits long. Press Reboot to restart the device and for the
changes to take effect.
Tip: If you use a memory card with no password, the memory card will be locked when you lock your device with the
remote locking message. To remove the memory card password, select Desk > Office > File manager, press Menu, and
select Memory card > Security > Remove password.... Enter the remote locking message as your password, and press
Remove. If the remote locking message is longer than 8 characters, the first 8 characters of the message are used as
the memory card password.
C o n t r o l p a n e l
Copyright © 2004-2005 Nokia. All Rights Reserved. 64
64


Need help? Post your question in this forum.

Forumrules


Report abuse

Libble takes abuse of its services very seriously. We're committed to dealing with such abuse according to the laws in your country of residence. When you submit a report, we'll investigate it and take the appropriate action. We'll get back to you only if we require additional details or have more information to share.

Product:

For example, Anti-Semitic content, racist content, or material that could result in a violent physical act.

For example, a credit card number, a personal identification number, or an unlisted home address. Note that email addresses and full names are not considered private information.

Forumrules

To achieve meaningful questions, we apply the following rules:

Register

Register getting emails for Nokia 9300 gps at:


You will receive an email to register for one or both of the options.


Get your user manual by e-mail

Enter your email address to receive the manual of Nokia 9300 gps in the language / languages: English as an attachment in your email.

The manual is 3,47 mb in size.

 

You will receive the manual in your email within minutes. If you have not received an email, then probably have entered the wrong email address or your mailbox is too full. In addition, it may be that your ISP may have a maximum size for emails to receive.

Others manual(s) of Nokia 9300 gps

Nokia 9300 gps User Manual - Dutch - 111 pages


The manual is sent by email. Check your email

If you have not received an email with the manual within fifteen minutes, it may be that you have a entered a wrong email address or that your ISP has set a maximum size to receive email that is smaller than the size of the manual.

The email address you have provided is not correct.

Please check the email address and correct it.

Your question is posted on this page

Would you like to receive an email when new answers and questions are posted? Please enter your email address.



Info