Manual Nokia 9000i (page 110 of 126) (English)

297910

110

Zoom out

Zoom in

1/126

13-14 Menus

In-call options (Menu 9)

The phone interface provides a number of control

functions that you can use during a call. To ac-

cess the in-call options during a call, simply press

and hold the Menu for a second. The in-call op-

tions are not numbered. You cannot, therefore,

access them by the shortcut method.

Mute / Unmute — Switches off or on the commu-

nicator’s microphone. If the communicator is

connected to a hands free car kit, Mute turns off

the microphone of the car kit, as well.

Hold / Unhold — Hold allows you to put a cur-

rently active call on hold, so that another call can

be initiated. After you have finished the new call

(with Drop call, see below), the original call can

be made active again by selecting Unhold. If the

held call is the only call, you can also unhold it

by pressing .

Swap — This function is available when you have

one active and one held call. Swap makes the held

call active and puts the currently active call on

hold. In this way, you may converse with one party

without ending the other call. Instead of using this

function, you can press to swap between the

calls if no numbers have been keyed in.

Drop call — Ends the currently active call. This

function is useful when there is an active call, as

well as a held call. In such a situation, pressing

would terminate both calls.

Join / Private — Join includes a new participant in

a conference call. During a conference call, Pri-

vate allows you to converse privately with a se-

lected call participant.

Transfer — The voice call transfer enables you to

connect two voice calls together and disconnect

yourself from both calls. See chapter 4 "Tele-

phone: Managing calls - Voice call transfer" on

page 4-4.

Data — When you have an alternating call active,

this option changes the mode of the call from

voice to fax or data (see chapter 4 "Telephone:

Managing calls - Alternating calls" on page 4-5).

Speech — When you have an alternating call ac-

tive, this option changes the mode of the call

from fax or data to voice.

Send DTMF — Transmits Dual Tone Multi Fre-

quency tones. This function helps you communi-

cate with answering machines, computerised

telephony systems, etc. For more details, see

”Sending DTMF tones” on page 13-3.

All sounds (Menu 10)

You can select the indication mode for incoming

calls and all alerts from the following options. This

setting affects both interfaces. You can adjust the

same settings in the System settings, see chapter

10 "System: System settings" on page 10-1.

Ring — A ringing tone will sound.

Beep — One short beep will sound and the phone

interface will flash its display lights.

Silent — Turns on the silent service: the commu-

nicator will flash its display lights. No tones will

be heard, including keypad and warning tones.

When silent service is selected, the text SILENT

will be shown on the display in idle mode.

Keypad lock (Menu 11)

The keypad lock prevents the keypad keys being

accidentally pressed when the communicator is,

for example, in your pocket. The keypad can be

locked or unlocked even during a call.

When the keypad lock is on:

To answer a call, press normally. During

a call, the keypad is unlocked and the com-

municator can be operated in the normal way.

After the call, the keypad lock is automatical-

ly turned back on.

The keypad lock will be automatically turned off

when the communicator is connected to a car

kit. When the communicator is removed from the

car kit, without being switched off previously,

the keypad lock will be activated automatically

again.

To activate the keypad lock:

1 Press Menu and use or to reach the

menu Keypad lock.

2 Press Select.

Report abuse

Libble takes abuse of its services very seriously. We're committed to dealing with such abuse according to the laws in your country of residence. When you submit a report, we'll investigate it and take the appropriate action. We'll get back to you only if we require additional details or have more information to share.

Product:

Forumrules

To achieve meaningful questions, we apply the following rules:

First, read the manual;
Check if your question has been asked previously;
Try to ask your question as clearly as possible;
Did you already try to solve the problem? Please mention this;
Is your problem solved by a visitor then let him/her know in this forum;
To give a response to a question or answer, do not use this form but click on the button 'reply to this question';
Your question will be posted here and emailed to our subscribers. Therefore, avoid filling in personal details.

new questions and answers
new manuals

You will receive an email to register for one or both of the options.

Get your user manual by e-mail

Enter your email address to receive the manual of Nokia 9000i in the language / languages: English as an attachment in your email.

The manual is 3,19 mb in size.

You will receive the manual in your email within minutes. If you have not received an email, then probably have entered the wrong email address or your mailbox is too full. In addition, it may be that your ISP may have a maximum size for emails to receive.

Others manual(s) of Nokia 9000i

Nokia 9000i User Manual - German - 150 pages

The manual is sent by email. Check your email

If you have not received an email with the manual within fifteen minutes, it may be that you have a entered a wrong email address or that your ISP has set a maximum size to receive email that is smaller than the size of the manual.

The email address you have provided is not correct.

Please check the email address and correct it.

Your question is posted on this page

Would you like to receive an email when new answers and questions are posted? Please enter your email address.

Info

Nokia 9000i Manual

Product: