297910

Nokia 9000i Manual

100
Zoom out
Zoom in
Previous page
1/126
Next page
13-4 Using memory
1998 Nokia Mobile Phones. All Rights Reserved.
Automatic transmission
In order to send DTMF tones automatically, you
must store them first. Storing DTMF strings is
most conveniently done in the communicator in-
terface, see chapter 3 "Contacts: Contact cards -
Storing DTMF tones" on page 3-3. If you want to
store DTMF strings in the phone interface, see
"Using memory: Storing information via the
phone interface" on page 13-5.
1 Press Memory. Key in the name of the con-
tact card that contains the DTMF service
phone number and the DTMF digits and press
Find.
For how to recall information, see "Using
memory: Recalling information" on page 13-5.
Note: When stored DTMF tones are recalled in
the phone interface, only DTMF strings
that have been stored in a Tel field can be
used.
2 When the recalled string (containing the
phone number and the DTMF digits) is on the
display, press .
After the connection has been established,
the DTMF tones will be sent directly, after a
small pause (if the sequence contained the p
character) or after you press for the sec-
ond time (if the sequence contained the w
character).
Using memory
The phone numbers and names you store are nor-
mally located in the standard memory of the
communicator, indicated by the letter “B” on the
phone interface display.
The “B” memory is the communicator memory,
known as the Contacts directory. When the com-
municator is started up for the first time, the “B”
memory is selected automatically.
The “A” memory is located on the SIM card that
is inserted in the communicator. The SIM card
memory uses numbered memory locations to
store data. When numbers are saved in the SIM
card (“A”) memory, a message will indicate its lo-
cation number. The number of standard memory
locations available on SIM cards varies from one
card to another.
When the “A” memory is selected, the phone in-
terface stores all contact information on the SIM
card and cannot access the Contacts directory.
Therefore, the use of the communications appli-
cations of the communicator interface will be
less convenient (you will have to enter most con-
tact information manually). This manual will as-
sume that you use the standard “B” memory.
Keying in a name
1 Press the Memory selection key to switch to
the alpha mode (the indicator is shown
on the phone interface display).
2 Press the key that has the desired character.
If the character you want is not the first to be
displayed, press the key again within one sec-
ond (before the cursor appears) to display the
next character. Keep pressing the key until
the desired character appears.
3 If you miss a character, keep pressing the key
until it appears again; or first press and
then start pressing the key again.
If you want a lower case character, press and
hold a key until the character appears in low-
er case. All further letters will appear in lower
case until a key is pressed and held once
again.
To enter a space between characters, press .
To correct a mistake, press .
ABC
… 100 …


Need help? Post your question in this forum.

Forumrules


Report abuse

Libble takes abuse of its services very seriously. We're committed to dealing with such abuse according to the laws in your country of residence. When you submit a report, we'll investigate it and take the appropriate action. We'll get back to you only if we require additional details or have more information to share.

Product:

For example, Anti-Semitic content, racist content, or material that could result in a violent physical act.

For example, a credit card number, a personal identification number, or an unlisted home address. Note that email addresses and full names are not considered private information.

Forumrules

To achieve meaningful questions, we apply the following rules:

Register

Register getting emails for Nokia 9000i at:


You will receive an email to register for one or both of the options.


Get your user manual by e-mail

Enter your email address to receive the manual of Nokia 9000i in the language / languages: English as an attachment in your email.

The manual is 3,19 mb in size.

 

You will receive the manual in your email within minutes. If you have not received an email, then probably have entered the wrong email address or your mailbox is too full. In addition, it may be that your ISP may have a maximum size for emails to receive.

Others manual(s) of Nokia 9000i

Nokia 9000i User Manual - German - 150 pages


The manual is sent by email. Check your email

If you have not received an email with the manual within fifteen minutes, it may be that you have a entered a wrong email address or that your ISP has set a maximum size to receive email that is smaller than the size of the manual.

The email address you have provided is not correct.

Please check the email address and correct it.

Your question is posted on this page

Would you like to receive an email when new answers and questions are posted? Please enter your email address.



Info