Chapter 7 - Internet 7-19
1998 Nokia Mobile Phones. All Rights Reserved.
Modem initialisation — Any modem initialisation
string containing AT commands may be entered
here, if needed. The initialisation string you enter
here is executed after the initialisation string you
define in the Internet settings (in Modem initial-
isation: Custom view).
Backspace key — Defines whether the keyboard
backspace key is used as a backspace (BS - de-
fault) or delete (DEL) key.
Terminal connection
When you have connected to the remote system,
the following commands become available:
Press Keys to emulate the VT100 special keys,
which are not available on the communicator
keyboard. The special keys include:
• Four programmable function keys (PF1-4).
• All VT100 application keypad keys (numbers
1-9, minus, comma, period, dash, enter).
• The following VT100 functions: reset
terminal, Ctrl-\, Ctrl-], Ctrl-~.
The selected special character is entered to the
left of the cursor by pressing Insert.
Press Texts to activate the text transfer com-
mands, see "Defining Telnet connections: Text
transfers" on page 7-17.
Press Zoom in if the whole emulated screen and,
consequently, character size is too small. The
Zoom out command returns the unzoomed view.
When the view is being zoomed, the scroll keys
can be used to switch between the upper and
lower parts of the terminal screen.
Press Hang up to close the connection to the
host, end the data call and return to the Terminal
application main view.
The scroll up/down buttons can be used for
scrolling the view. Scrolling does not affect the
cursor position. Pressing any keyboard key re-
turns the view to the cursor position.
