Manual Nokia 9000i (page 27 of 126) (English)

297910

Zoom out

Zoom in

1/126

Chapter 3 - Contacts 3-3

(number 1 is reserved for calling your voice mail-

box, see chapter 4 "Telephone: Telephone set-

tings" on page 4-6). For information on how to use

the speed dials, see chapter 13 "Phone interface:

Using memory - Dialling shortcuts" on page 13-5.

To set speed dials:

1 Press Speed dials in an opened contact card.

All phone number fields of the contact card

are shown.

2 Select a field to which you want to assign a

speed dial and press Change. Select a loca-

tion and press OK.

To change or remove speed dials:

1 Select the speed dial you want to change or

remove and press Change.

2 Move the selection frame to the location you

want to use and press OK. If you want to re-

move a speed dial location, choose None.

Storing DTMF tones

The Dual Tone Multi Frequency (DTMF) tones al-

low you to communicate with voice mailboxes,

computerised telephony systems, etc. For infor-

mation on how to send DTMF tones, see chapter

4 "Telephone: Managing calls - Sending DTMF

tones" on page 4-5, or chapter 13 "Phone inter-

face: Sending DTMF tones" on page 13-3.

• If you only communicate with the contact

using DTMF tones, create a contact card for

the DTMF contact.

• If you need both a voice and a DTMF phone

number for the contact, add a new field to an

existing contact card. The DTMF sequence can

be stored either in the Tel field, after the tele-

phone number, or separately, in a DTMF field.

If you store the sequence in a Tel field, the

phone number and the DTMF sequence must

be separated by one of the DTMF special char-

acters. Label the field (with Change label) so

you can identify the DTMF sequence.

The DTMF special characters are listed in the

following table:

Logs

The Contacts application shows all communica-

tion events as two logs:

• General log shows all (or certain types of)

communication events in chronological order,

see figure 3-2.

• Individual log shows a list of all communi-

cation events relating to the selected contact.

To access the logs:

1 Press Logs in the Contacts main view. The

command set changes.

2 Select the desired log type by pressing either

Individual log or General log.

To erase the contents of the log:

1 Press Clear list. A pop-up box opens to let you

define which contacts will be deleted (meas-

ured in days). The clearing procedure reflects

on the other log, as well.

To create a new contact card:

1 Open the General log.

Character Function

* and #

May be used if the DTMF

service requires them.

p (pause)

Inserts a pause of 2.5 sec-

onds in front of, or between,

DTMF digits.

w (wait)

When the “w” character is

stored in a sequence, the

rest of the sequence is not

sent until you press Send

again in the Telephone

application.

Table 3-1

Report abuse

Libble takes abuse of its services very seriously. We're committed to dealing with such abuse according to the laws in your country of residence. When you submit a report, we'll investigate it and take the appropriate action. We'll get back to you only if we require additional details or have more information to share.

Product:

Forumrules

To achieve meaningful questions, we apply the following rules:

First, read the manual;
Check if your question has been asked previously;
Try to ask your question as clearly as possible;
Did you already try to solve the problem? Please mention this;
Is your problem solved by a visitor then let him/her know in this forum;
To give a response to a question or answer, do not use this form but click on the button 'reply to this question';
Your question will be posted here and emailed to our subscribers. Therefore, avoid filling in personal details.

new questions and answers
new manuals

You will receive an email to register for one or both of the options.

Get your user manual by e-mail

Enter your email address to receive the manual of Nokia 9000i in the language / languages: English as an attachment in your email.

The manual is 3,19 mb in size.

You will receive the manual in your email within minutes. If you have not received an email, then probably have entered the wrong email address or your mailbox is too full. In addition, it may be that your ISP may have a maximum size for emails to receive.

Others manual(s) of Nokia 9000i

Nokia 9000i User Manual - German - 150 pages

The manual is sent by email. Check your email

If you have not received an email with the manual within fifteen minutes, it may be that you have a entered a wrong email address or that your ISP has set a maximum size to receive email that is smaller than the size of the manual.

The email address you have provided is not correct.

Please check the email address and correct it.

Your question is posted on this page

Would you like to receive an email when new answers and questions are posted? Please enter your email address.

Info

Nokia 9000i Manual

Product: