29454
30
Zoom out
Zoom in
Previous page
1/33
Next page
GB 30
PROBLEM SOLVING
FRONT PANEL DISPLAY
Problem
The remote control is not working.
You see the on-screen message.
Viewing card error.
You have forgotten your secret PIN
code.
Possible causes
Battery exhausted.
Remote control is incorrectly
aimed.
The DMP is in standby mode.
The DMP cant recognise or detect
your Smartcard.
What to do
Change the batteries (both).
Aim the remote control at box.
Check that nothing blocks the front
panel.
Check if (.) is flashing on the front
panel display when you press a button.
If not replace the batteries (both).
Check that you are using the proper
Smartcard. Check that the Smartcard
has been correctly inserted with the
gold chip downwards. If the problem
persists, you may have a problem with
the card.
Contact your dealer or Service Pro-
vider.
Contact your Service Provider.
They will help you set it up again.
Please note: The first thing to do before sending the DMP to service is to:
1: Perform Diagnostic procedure in System Information menu.
2: Try downloading new software into the DMP.
With this procedure, the new software may solve the problem in the quickest and most efficient way.
See the relevant section Receiver Upgrade earlier on in this manual.
What to do if you can’t solve the problem
If you have tried all of the actions suggested above, without solving the problem, please contact your
dealer or Service Provider.
Channel number in TV mode.
The DMP is in standby mode, and
current time is shown.
Channel number in radio mode.
Flashes when pressing a button
on the remote control.
RF channel in tuning mode.
Lights when no signal is being re-
ceived.
When power-up, front processor
version, boot version and system
software version is shown.
When starting from standby, prod-
uct variant and system software
version is shown.
Remaining time in percent during
the download procedure.
Error messages. For service per-
sonnel
When downloading new software
via the air.
When downloading new software
via the Serial RS232 socket.
30


Need help? Post your question in this forum.

Forumrules


Report abuse

Libble takes abuse of its services very seriously. We're committed to dealing with such abuse according to the laws in your country of residence. When you submit a report, we'll investigate it and take the appropriate action. We'll get back to you only if we require additional details or have more information to share.

Product:

For example, Anti-Semitic content, racist content, or material that could result in a violent physical act.

For example, a credit card number, a personal identification number, or an unlisted home address. Note that email addresses and full names are not considered private information.

Forumrules

To achieve meaningful questions, we apply the following rules:

Register

Register getting emails for Nokia 8830S at:


You will receive an email to register for one or both of the options.


Get your user manual by e-mail

Enter your email address to receive the manual of Nokia 8830S in the language / languages: English as an attachment in your email.

The manual is 0,79 mb in size.

 

You will receive the manual in your email within minutes. If you have not received an email, then probably have entered the wrong email address or your mailbox is too full. In addition, it may be that your ISP may have a maximum size for emails to receive.

The manual is sent by email. Check your email

If you have not received an email with the manual within fifteen minutes, it may be that you have a entered a wrong email address or that your ISP has set a maximum size to receive email that is smaller than the size of the manual.

The email address you have provided is not correct.

Please check the email address and correct it.

Your question is posted on this page

Would you like to receive an email when new answers and questions are posted? Please enter your email address.



Info