29454
11
Zoom out
Zoom in
Previous page
1/33
Next page
GB 11
This procedure is necessary only if your DMP is connected
to the TV with an RF lead.
To tune your TV to the RF signal you might also need your TV
manual in addition to this manual. The steps below explain what
to do if you have been unable to use Audio/Video leads in your
connection.
Plug in your DMP.
Tuning your TV to the DMP
Select a channel number on the TV that is not currently used
for other TV channels.
Follow the instructions in your TV manual to tune the TV chan-
nel selector to VHF channel 3 (this is the DMPs factory pre-
set VHF channel). If you are already using this channel, select
channel 4.
If you need to change VHF channel you do as follows:
First you change on the DMP. Use the
or buttons on the
front panel of the DMP, or on the remote. You will see the VHF
channel number displayed on the front panel of the DMP. Then
you tune the TV channel selector to the same VHF channel.
When you have correctly changed the VHF channel number
you will see the
Welcome
menu on the TV screen.
If there is interference from other channels you will have to
change the chosen VHF channel.
Follow the instructions in your TV manual to store this VHF chan-
nel as the channel used by your DMP. You will have to select it
when you want to watch digital TV/Radio channels.
Once the welcome message is visible, press the OK button
on the DMPs remote control to start the installation procedure.
If for some reason you have to change the RF channel later,
you can do this by using TV settings menu further on in this
manual.
If you have a VCR connected it must be tuned to a different
VHF channel (between 3 to 4) than the DMP.
You may now proceed to First Time Installation.
Tuning Procedure when RF Connections are Used
11


Need help? Post your question in this forum.

Forumrules


Report abuse

Libble takes abuse of its services very seriously. We're committed to dealing with such abuse according to the laws in your country of residence. When you submit a report, we'll investigate it and take the appropriate action. We'll get back to you only if we require additional details or have more information to share.

Product:

For example, Anti-Semitic content, racist content, or material that could result in a violent physical act.

For example, a credit card number, a personal identification number, or an unlisted home address. Note that email addresses and full names are not considered private information.

Forumrules

To achieve meaningful questions, we apply the following rules:

Register

Register getting emails for Nokia 8830S at:


You will receive an email to register for one or both of the options.


Get your user manual by e-mail

Enter your email address to receive the manual of Nokia 8830S in the language / languages: English as an attachment in your email.

The manual is 0,79 mb in size.

 

You will receive the manual in your email within minutes. If you have not received an email, then probably have entered the wrong email address or your mailbox is too full. In addition, it may be that your ISP may have a maximum size for emails to receive.

The manual is sent by email. Check your email

If you have not received an email with the manual within fifteen minutes, it may be that you have a entered a wrong email address or that your ISP has set a maximum size to receive email that is smaller than the size of the manual.

The email address you have provided is not correct.

Please check the email address and correct it.

Your question is posted on this page

Would you like to receive an email when new answers and questions are posted? Please enter your email address.



Info