297913
113
Zoom out
Zoom in
Previous page
1/153
Next page
Control panel
113
Copyright © 2005 Nokia. All rights reserved.
Security
Go to Desk > Control panel > Security.
Here you can define the phone security level of your
smartphone.
Codes are shown as asterisks. If you are changing a code,
you will be prompted for the current code and then the
new code twice. For more information on access codes, see
“Access codes” on page 24.
Avoid using codes that are similar to emergency numbers,
such as 112, to prevent accidental dialling of the
emergency number.
Device lock
Autolock period: — You can set an autolock period, a time-
out after which the smartphone is automatically locked
and can be used only if the correct lock code is entered.
Note: When the device is locked, calls still may be
possible to the official emergency number programmed
into your device.
Lock code: — The lock code must be from five to ten digits
long. The factory setting for the lock code is 12345. To
avoid unauthorised use of your smartphone, change the
lock code. Keep the new code secret and in a safe place
separate from your smartphone.
Lock if SIM card changed: — You can set the smartphone to
ask for the lock code when an unknown, new SIM card is
inserted into your smartphone. The smartphone maintains
a list of SIM cards that are recognised as the owner’s
cards.
PIN codes
PIN code request: — When active, the code is requested
each time the smartphone is switched on. Deactivating
the PIN code request may not be allowed by some SIM
cards. If you enter the PIN code incorrectly three times in
succession, you will need a PUK (PIN Unblocking Key)
code to unblock the SIM card. When the SIM card is
blocked, you can only make calls to preprogrammed
emergency numbers. Otherwise, you cannot use the
smartphone before you enter the appropriate codes.
Note that this setting cannot be changed, if the phone is
switched off or if there is no valid SIM card inserted. Note
also that some SIM cards do not allow you to turn the PIN
code request off.
Confirm SIM services: (network service) — To set the
smartphone to display confirmation messages when you
are using a SIM card service.
PIN code: — The PIN code must be from 4 to 8 digits long.
PIN2 code: —The PIN2 code must be from 4 to 8 digits long.
The PIN2 code is required to access some functions, such
as the call cost settings, which must be supported by your
SIM card. If you enter an incorrect PIN2 code three times
in succession, you will need a PUK2 code to unblock the
113


Need help? Post your question in this forum.

Forumrules


Report abuse

Libble takes abuse of its services very seriously. We're committed to dealing with such abuse according to the laws in your country of residence. When you submit a report, we'll investigate it and take the appropriate action. We'll get back to you only if we require additional details or have more information to share.

Product:

For example, Anti-Semitic content, racist content, or material that could result in a violent physical act.

For example, a credit card number, a personal identification number, or an unlisted home address. Note that email addresses and full names are not considered private information.

Forumrules

To achieve meaningful questions, we apply the following rules:

Register

Register getting emails for Nokia 7710 gps at:


You will receive an email to register for one or both of the options.


Get your user manual by e-mail

Enter your email address to receive the manual of Nokia 7710 gps in the language / languages: English as an attachment in your email.

The manual is 3,61 mb in size.

 

You will receive the manual in your email within minutes. If you have not received an email, then probably have entered the wrong email address or your mailbox is too full. In addition, it may be that your ISP may have a maximum size for emails to receive.

Others manual(s) of Nokia 7710 gps

Nokia 7710 gps User Manual - Dutch - 174 pages


The manual is sent by email. Check your email

If you have not received an email with the manual within fifteen minutes, it may be that you have a entered a wrong email address or that your ISP has set a maximum size to receive email that is smaller than the size of the manual.

The email address you have provided is not correct.

Please check the email address and correct it.

Your question is posted on this page

Would you like to receive an email when new answers and questions are posted? Please enter your email address.



Info