774483
15
Zoom out
Zoom in
Previous page
1/46
Next page
15
After unpacking, allow the TV set to reach the ambient room temperature before you connect the set to the
mains.
Connect the supplied adaptor to a system that supplies 100-240 V AC, 50/60 Hz. The TV will switch on
automatically.
In order to supply the power via the cigarette lighter socket of your vehicle, plug one end of the cigarette
lighter adaptor cable (car plug - can be purchased separately if not supplied with the TV) into the vehicle socket
and plug the other end of the adaptor cable into the DC 12 V terminal on the back side of the TV.
Be sure to ground the connection properly
Connect the ground terminal of the AC adaptor with the ground terminal provided at the power outlet
using the enclosed power cord. If the provided plug does not t your outlet, consult an electrician for
replacement of the obsolete outlet. Surely connect the ground wire.
To switch on the TV from standby
If the TV is in standby mode the standby LED lights up. To switch on the TV from standby mode either:
Press the Standby button on the remote control.
Press the centre of the control switch on the TV in.
The TV will then switch on.
To switch the TV into standby
The TV cannot be switched into standby mode via control switch. Press and hold the Standby button on the
remote control. Power o dialogue will appear on the screen. Highlight OK and press the OK button. The TV
will switch into standby mode.
To switch o the TV
To power down the TV completely, unplug the power adaptor from the mains socket.
Quick standby mode
In order to switch the TV into quick standby mode either;
Press the Standby button on the remote. Press again to go back to operating mode.
Press the centre of the control switch on the TV in and hold it down for a few seconds.
Press again to go back to operating mode.
5.3.2. Connected with low voltage adapter
Switching on the TV using car plug
1. In order to supply the power via the cigarette lighter socket of your vehicle, plug one end of the cigarette
lighter adaptor cable (car plug - can be purchased separately if not supplied with the TV) into the vehicle
socket and plug the other end of the adaptor cable into the DC 12 V terminal on the backside of the TV.
Then the standby LED will light up.
2. Press the Standby button on the remote control or press the centre (optional) of the control switch on the
TV in. The TV will then switch on.
3. Adjust the antenna position for better reception or reinstall TV channels if necessary.
Switching o the TV
1. The TV cannot be switched into standby mode via the control switch. Press and hold the Standby button
on the remote control. Power o dialogue will appear on the screen. Highlight OK and press the OK
button. TV will switch into standby mode.
2. Unplug cable connectors and power plugs.
ATTENTION: 12 V Input
V+
V+
V-V-
15


Need help? Post your question in this forum.

Forumrules


Report abuse

Libble takes abuse of its services very seriously. We're committed to dealing with such abuse according to the laws in your country of residence. When you submit a report, we'll investigate it and take the appropriate action. We'll get back to you only if we require additional details or have more information to share.

Product:

For example, Anti-Semitic content, racist content, or material that could result in a violent physical act.

For example, a credit card number, a personal identification number, or an unlisted home address. Note that email addresses and full names are not considered private information.

Forumrules

To achieve meaningful questions, we apply the following rules:

Register

Register getting emails for Nokia 7000D at:


You will receive an email to register for one or both of the options.


Get your user manual by e-mail

Enter your email address to receive the manual of Nokia 7000D in the language / languages: English as an attachment in your email.

The manual is 1.76 mb in size.

 

You will receive the manual in your email within minutes. If you have not received an email, then probably have entered the wrong email address or your mailbox is too full. In addition, it may be that your ISP may have a maximum size for emails to receive.

Others manual(s) of Nokia 7000D

Nokia 7000D User Manual - German - 45 pages


The manual is sent by email. Check your email

If you have not received an email with the manual within fifteen minutes, it may be that you have a entered a wrong email address or that your ISP has set a maximum size to receive email that is smaller than the size of the manual.

The email address you have provided is not correct.

Please check the email address and correct it.

Your question is posted on this page

Would you like to receive an email when new answers and questions are posted? Please enter your email address.



Info