Manual Nokia 6630 (page 118 of 120) (English)

36238

118

Zoom out

Zoom in

1/120

R0915_en.book Page 1 Tuesday, February 8, 2005 11:46 AM

DECLARATION OF CONFORMITY We, NOKIA CORPORATION declare under our sole responsibility that the product RM-1 is in conformity with

the provisions of the following Council Directive: 1999/5/EC. A copy of the Declaration of Conformity can be found at http://www.nokia.com/

phones/declaration_of_conformity/

Reproduction, transfer, distribution or storage of part or all of the contents in this document in any form without the prior written permission of Nokia is prohibited.

Nokia, Nokia Connecting People, and Pop-Port are trademarks or registered trademarks of Nokia Corporation. Other product and company names mentioned herein may

be trademarks or tradenames of their respective owners.

Nokia tune is a sound mark of Nokia Corporation.

Java™ and all Java-based marks are trademarks or registered trademarks of Sun Microsystems, Inc.

Bluetooth is a registered trademark of Bluetooth SIG, Inc.

patents pending.

USE OF THIS PRODUCT IN ANY MANNER THAT COMPLIES WITH THE MPEG-4 VISUAL STANDARD IS PROHIBITED, EXCEPT FOR USE DIRECTLY RELATED TO (A) DATA OR

INFORMATION (i) GENERATED BY AND OBTAINED WITHOUT CHARGE FROM A CONSUMER NOT THEREBY ENGAGED IN A BUSINESS ENTERPRISE, AND (ii) FOR PERSONAL

USE ONLY; AND (B) OTHER USES SPECIFICALLY AND SEPARATELY LICENSED BY MPEG LA, L.L.C.

Nokia operates a policy of continuous development. Nokia reserves the right to make changes and improvements to any of the products described in this document without

prior notice.

Under no circumstances shall Nokia be responsible for any loss of data or income or any special, incidental, consequential or indirect damages howsoever caused.

The contents of this document are provided ‘as is’. Except as required by applicable law, no warranties of any kind, either express or implied, including, but not limited to,

the implied warranties of merchantability and fitness for a particular purpose, are made in relation to the accuracy, reliability or contents of this document. Nokia reserves

the right to revise this document or withdraw it at any time without prior notice

The availability of particular products may vary by region. Please check with the Nokia dealer nearest to you.

Export Controls

This device may contain commodities, technology or software subject to export laws and regulations from the US and other countries. Diversion contrary to law is

prohibited.

FCC INDUSTRY CANADA NOTICE

R0915_en.book Page 2 Tuesday, February 8, 2005 11:46 AM

Your device may cause TV or radio interference (for example, when using a telephone in close proximity to receiving equipment). The FCC or Industry Canada can require

you to stop using your telephone if such interference cannot be eliminated. If you require assistance, contact your local service facility. This device complies with part 15

of the FCC rules. Operation is subject to the following two conditions: (1) This device may not cause harmful interference, and (2) this device must accept any interference

received, including interference that may cause undesired operation.

ISSUE 3 EN, 9234401

R0915_en.book Page 3 Tuesday, February 8, 2005 11:46 AM

Contents

FOR YOUR SAFETY ....................................8

Personalising your phone........................11

Profiles - setting tones...................................................... 12

Offline profile ............................................................... 12

Themes - the look of your phone ................................... 13

Your phone...............................................15

Essential indicators............................................................. 15

Clock....................................................................................... 16

Clock settings............................................................... 16

World clock ...................................................................17

Volume control and built-in loudspeaker....................17

File manager - managing memory................................. 17

Viewing memory consumption................................18

Memory low - freeing memory ............................... 18

Memory card tool.............................................................. 19

Formatting a memory card....................................... 20

Making calls.............................................21

Making a voice call............................................................. 21

Making a video call..................................................... 21

Speed dialling a phone number .............................. 22

Making a conference call (network service)........23

Answering or rejecting a call...........................................23

Answering or rejecting a video call........................24

Call waiting (network service).................................24

Options during a call..................................................24

Log...........................................................................................25

Recent calls ..................................................................25

Call duration.................................................................25

Packet data ...................................................................26

Monitoring all communication events..................26

Contacts (Phonebook).............................28

Saving names and numbers............................................. 28

Using default numbers and addresses...................28

Copying contacts between the SIM card and device

memory..................................................................................29

SIM directory and other SIM services ...................29

Adding ringing tones for contacts ................................. 29

Voice dialling........................................................................ 30

Adding a voice tag to a phone number ................30

Making a call by saying a voice tag.......................31

Creating contact groups ...................................................31

Removing members from a group..........................31

Camera and Gallery .................................32

Camera................................................................................... 32

Taking pictures.............................................................32

R0915_en.book Page 4 Tuesday, February 8, 2005 11:46 AM

Taking pictures in a sequence..................................34

You in the picture - self-timer ................................34

Adjusting camera settings.........................................34

Recording videos..........................................................35

Adjusting video recorder settings ...........................36

Gallery.....................................................................................36

Viewing images ............................................................37

Media ....................................................... 38

Video editor...........................................................................38

Editing video, sound, and transitions.....................38

Movie director......................................................................40

Settings...........................................................................41

Image mgr. ............................................................................41

Recorder.................................................................................41

RealPlayer™ ...........................................................................41

Playing video or sound clips .....................................42

Streaming content over the air ...............................42

Receiving RealPlayer settings ..................................43

Messaging ................................................ 45

Writing text...........................................................................46

Traditional text input..................................................46

Predictive text input - Dictionary...........................47

Copying text to clipboard..........................................49

Writing and sending messages........................................49

Receiving MMS and e-mail settings......................51

Inbox - receiving messages ..............................................51

Receiving multimedia messages .............................52

Receiving logos, tones, business cards, calendar

entries, and settings ...................................................52

Receiving Web service messages............................53

My folders ............................................................................53

Mailbox ..................................................................................53

Opening the mailbox ..................................................54

Retrieving e-mail messages......................................54

Deleting e-mail messages.........................................55

Disconnecting from the mailbox.............................56

Outbox - messages waiting to be sent.........................56

Viewing messages on a SIM card ...................................57

Messaging settings.............................................................57

Settings for text messages .......................................57

Settings for multimedia messages .........................58

Settings for e-mail......................................................59

Settings for Web service messages........................61

Settings for cell broadcast (network service)......61

Other settings...............................................................62

Calendar and To-do ................................ 63

Calendar - creating calendar entries.............................63

Calendar views.............................................................64

Setting a calendar alarm...........................................64

Calendar settings.........................................................65

To-do - task list...................................................................65

Web .......................................................... 66

R0915_en.book Page 5 Tuesday, February 8, 2005 11:46 AM

Accessing the Web .............................................................66

Receiving browser settings....................................... 66

Keying in the settings manually .............................66

Bookmarks view................................................................... 67

Adding bookmarks manually....................................67

Sending bookmarks..................................................... 68

Making a connection.........................................................68

Connection security....................................................68

Browsing................................................................................ 69

Viewing saved pages ..................................................70

Downloading and purchasing items.............................. 70

Ending a connection ..........................................................71

Emptying the cache....................................................71

Settings for Web .................................................................71

Organiser ..................................................73

Calculator.............................................................................. 73

Calculating percentages............................................ 73

Notes ......................................................................................73

Go to - adding shortcuts .................................................. 74

Deleting a shortcut..................................................... 74

Converter - converting measures................................... 74

Setting a base currency and exchange rates ...... 75

Wallet .................................................................................... 75

Creating a wallet code............................................... 76

Storing personal card details...................................76

Creating personal notes ............................................ 77

Creating a wallet profile ...........................................77

Viewing ticket details.................................................78

Wallet settings............................................................. 78

Resetting the wallet and wallet code ...................78

IM - Instant Messaging (chat)...............80

Receiving IM settings ........................................................80

Connecting to an IM server .............................................80

Modifying your IM settings..............................................81

Searching for IM groups and users................................ 81

Joining and leaving an IM group.................................... 82

Chatting.................................................................................82

Recording chats...........................................................83

Viewing and starting conversations ..............................83

IM contacts...........................................................................84

Managing IM groups..........................................................84

Administrating an IM group ............................................ 85

Creating a new IM group..........................................85

Adding and removing group members.................. 85

Chat server settings............................................................86

Connectivity .............................................87

Bluetooth connection........................................................87

Bluetooth settings....................................................... 87

Sending data using Bluetooth.................................88

Pairing devices ............................................................. 89

Receiving data using Bluetooth.............................. 90

Switching off Bluetooth............................................ 90

PC connections - using Bluetooth or USB................... 90

R0915_en.book Page 6 Tuesday, February 8, 2005 11:46 AM

Using the CD-ROM......................................................90

Using your phone as a modem ................................90

Connection manager ..........................................................91

Viewing data connection details.............................91

Sync - remote synchronisation........................................92

Creating a new synchronisation profile ................92

Synchronising data......................................................93

Tools ......................................................... 95

Settings ..................................................................................95

Phone settings ..............................................................95

Call settings...................................................................96

Connection settings ....................................................97

Date and time............................................................ 101

Security........................................................................101

Call diverting..............................................................104

Call barring (network service)............................... 105

Network....................................................................... 105

Enhancement settings.............................................106

Voice commands ...............................................................106

Adding a voice command to an application......106

Application manager........................................................107

Installing applications and software ...................107

Removing applications and software ..................108

Application settings..................................................109

Activation keys - handling copyright protected files ....

109

Transfer - transferring content from another phone.....

110

Device manager - service provider configuration....111

Server profile settings..............................................111

Battery information..............................113

Charging and Discharging ..............................................113

CARE AND MAINTENANCE..................113

ADDITIONAL SAFETY INFORMATION..114

Index 117

R0915_en.book Page 7 Tuesday, February 8, 2005 11:46 AM

FOR YOUR SAFETY

Read these simple guidelines. Not following them may be

dangerous or illegal. Read the complete user guide for

further information.

SWITCH ON SAFELY Do not switch the

phone on when wireless phone use is

prohibited or when it may cause interference

or danger.

ROAD SAFETY COMES FIRST Obey all local

laws. Always keep your hands free to operate

the vehicle while driving. Your first

consideration while driving should be road

safety.

INTERFERENCE All wireless phones may be

susceptible to interference, which could affect

performance.

SWITCH OFF IN HOSPITALS Follow any

restrictions. Switch the phone off near

medical equipment.

SWITCH OFF IN AIRCRAFT Follow any

restrictions. Wireless phones can cause

interference in aircraft.

SWITCH OFF WHEN REFUELLING Don't use

the phone at a refuelling point. Don't use near

fuel or chemicals.

SWITCH OFF NEAR BLASTING Follow any

restrictions. Don't use the phone where

blasting is in progress.

USE SENSIBLY Use only in the normal

position as explained in the product

documentation. Don't touch the antenna

unnecessarily.

QUALIFIED SERVICE Only qualified personnel

may install or repair this product.

ENHANCEMENTS AND BATTERIES Use only

approved enhancements and batteries. Do not

connect incompatible products.

WATER-RESISTANCE Your phone is not

water-resistant. Keep it dry.

BACK-UP COPIES Remember to make back-

up copies or keep a written record of all

important information.

CONNECTING TO OTHER PHONES When

connecting to any other phone, read its user

guide for detailed safety instructions. Do not

connect incompatible products.

R0915_en.book Page 8 Tuesday, February 8, 2005 11:46 AM

EMERGENCY CALLS Ensure the phone

function of the phone is switched on and in

service. Press as many times as needed to

clear the display and return to the start screen.

Enter the emergency number, then press .

Give your location. Do not end the call until

given permission to do so.

ABOUT YOUR DEVICE

The wireless device described in this guide is approved for

use on the EGSM 900/1800/1900, and UMTS 2000

network. Contact your service provider for more

information about networks.

When using the features in this device, obey all laws and

respect privacy and legitimate rights of others.

Warning: To use any features in this device, other

than the alarm clock, the phone must be switched

on. Do not switch the device on when wireless

phone use may cause interference or danger.

Network Services

To use the phone you must have service from a wireless

service provider. Many of the features in this device

depend on features in the wireless network to function.

These Network Services may not be available on all

networks or you may have to make specific arrangements

with your service provider before you can utilize Network

Services. Your service provider may need to give you

additional instructions for their use and explain what

charges will apply. Some networks may have limitations

that affect how you can use Network Services. For

instance, some networks may not support all language-

dependent characters and services.

Your service provider may have requested that certain

features be disabled or not activated in your device. If so,

they will not appear on your device menu. Contact your

service provider for more information.

This wireless device is a 3GPP GSM Release 99 terminal

supporting GPRS service, and is designed to support also

Release 97 GPRS networks. However, there may be some

compatibility issues when used in some Release 97 GPRS

networks. For more information, contact your service

provider.

This device supports WAP 2.0 protocols (HTTP and SSL)

that run on TCP/IP protocols. Some features of this device,

such as MMS, browsing, e-mail and content downloading

via browser or over MMS, require network support for

these technologies.

Enhancements, batteries,

and chargers

Check the model number of any charger before use with

this phone. This phone is intended for use when supplied

with power from ACP-12 and LCH-12.

R0915_en.book Page 9 Tuesday, February 8, 2005 11:46 AM

Warning: Use only batteries, chargers, and

enhancements approved by Nokia for use with this

particular model. The use of any other types may

invalidate any approval or warranty, and may be

dangerous.

For availability of approved enhancements, please check

with your dealer. When you disconnect the power cord of

any enhancement, grasp and pull the plug, not the cord.

Your phone and its enhancements may contain small parts.

Keep them out of reach of small children.

R0915_en.book Page 10 Tuesday, February 8, 2005 11:46 AM

Personalising your phone

Note: Your service provider/network operator may have requested a different order

for menu items or the inclusion of different icons in the phone menu. Contact your

service provider/network operator or Nokia Customer Care for assistance with any

features that differ from those described in this guide.

• To change the standby mode background image, or what is shown in the screen saver,

see Themes - the look of your phone

, p. ’13’.

• To customise the ringing tones, see Profiles - setting tones

, p. ’12’.

• To change shortcuts assigned for the selection keys in the standby mode, select Tools→

Settings→ Phone→ Standby mode→ Left selection key or Right selection key.

• To change the shortcuts assigned for the different presses of the Scroll key in the

standby mode, see Standby mode

, p. ’96’.

• To change the clock shown in the standby mode, select Clock→ Options→ Settings.

Scroll to Clock type and select Analogue or Digital.

• To change the Clock alarm tone, select Clock→ Options→ Settings. Scroll to Clock

Alarm tone and select a tone.

• To change the Calendar alarm tone, select Calendar→ Options→ Settings.

• To change the welcome note to an image or animation, select Tools→ Settings→

Phone→ General→ Welcome note or logo.

• To assign an individual ringing tone to a contact, select Contacts. See p. ’28’.

• To assign a speed dial to a contact, press a numbered key in the standby mode (

is reserved for the voice mailbox), and press . Select a contact. To change the speed

dialling status (pressing and holding a speed dial key in the standby mode) to Off, select

Tools→ Settings→ Call→ Speed dialling.

Fig. 1 Standby mode

with a new background

image, a new selection

key shortcut, UMTS

network and Bluetooth

activated.

R0915_en.book Page 11 Tuesday, February 8, 2005 11:46 AM

Personalising your phone

• To rearrange the main Menu, in the main Menu, select Options→ Move, Move to

folder, or New folder. You can move less used applications into folders, and place

applications that you use more often into the main Menu.

Profiles - setting tones

To set and customise the ringing tones, message alert tones, and other tones for different

events, environments, or caller groups, press and select Profiles. You can see the

currently selected profile at the top of the display in the standby mode. If the General

profile is in use, only the current date is shown.

• To change the profile, press in the standby mode. Scroll to the profile you want to

activate and press OK.

Tip! When you are

choosing a tone, Tone

downloads opens a list of

bookmarks. You can

select a bookmark and

start connection to a Web

page to download tones.

• To modify a profile, select Profiles. Scroll to the profile and select Options→

Personalise. Scroll to the setting you want to change, and press to open the

choices. Tones stored on the memory card are indicated with . You can scroll through

the tone list and listen to each one before you make your selection. Press any key to

stop the sound.

• To create a new profile, select Options→ Create new.

Offline profile

Offline profile lets you use the phone without connecting to the wireless network. When

you activate the Offline profile, the connection to the wireless network is turned off, as

indicated by in the signal strength indicator. All wireless phone signals to and from the

device are prevented. If you try to send messages, they are placed in Outbox to be sent

later.

R0915_en.book Page 12 Tuesday, February 8, 2005 11:46 AM

Personalising your phone

Tip! For information

on how to change the

alert tone for Calendar or

Clock, see Personalising

your phone, p. ’11’.

Warning: In Offline profile you cannot make calls, except calls to certain

emergency numbers, or use features that require network coverage. To make calls,

change the profile to activate the phone function. If the device has been locked, you

must enter the unlock code before you can change the profile and make calls.

Warning: Your device must be switched on to use the offline profile. Do not switch

the device on when wireless device use is prohibited or when it may cause

interference or danger.

To leave the Offline profile, select another profile and select Options→ Activate. Press Yes.

The phone re-enables wireless transmissions (providing there is sufficient signal strength).

If Bluetooth was activated before entering the Offline profile, it will be deactivated.

Bluetooth will automatically be reactivated after leaving the Offline profile. See ‘Bluetooth

connection’, p. 89.

Themes - the look of your phone

To change the look of your phone display, such as the wallpaper, colour palette, and icons,

press and select Tools→ Themes. The active theme is indicated by . In Themes you

can group together elements from other themes or select images from Gallery to

personalise themes further. The themes on the memory card are indicated by . The

themes on the memory card are not available if the memory card is not inserted in the

phone. If you want to use the themes saved in the memory card without the memory card,

save the themes in the phone memory first.

Options in the

Themes main view:

Preview/ Theme

downloads, Apply, Edit,

Copy to mem. card, Copy

to phone mem., Help, and

Exit.

• To activate a theme, scroll to it and select Options→ Apply.

• To preview a theme, scroll to it, and select Options→ Preview.

• To edit themes, scroll to a theme and select Options→ Edit to change the following

options:

• Wallpaper - the image to be shown as a background image in the standby mode.

• Colour palette - the colours used on the screen.

R0915_en.book Page 13 Tuesday, February 8, 2005 11:46 AM

Personalising your phone

• Screen saver - the screen saver type: date and time, or a text you have written

yourself. See also Screen saver timeout settings, p. ’96’

• Image in 'Go to' - the background image for the Go to application.

• To restore the selected theme back to its original settings, select Options→ Restore

orig. theme when you are editing a theme.

R0915_en.book Page 14 Tuesday, February 8, 2005 11:46 AM

Your phone

Essential indicators

- The phone is being used in a GSM network.

(network service) - The phone is being used in a UMTS

network. See Network

, p. ’105’.

- You have received one or several messages to the

Inbox folder in Messaging.

- There are messages waiting to be sent in Outbox. See

p. ’56’

and - You have missed calls. See Recent calls

p.’25’

- Shown if Ringing type is set to Silent and Message

alert tone, IM alert tone, and E-mail alert tone are set to

Off. See Profiles - setting tones

, p. ’12’.

- The phone keypad is locked. See the Quick Start

Guide, ‘Keypad lock (Keyguard)’.

- You have an active alarm. See Clock

, p. ’16’.

- The second phone line is being used. See Line in use,

p. ’97’

- All calls to the phone are diverted to another

number. If you have two phone lines, the divert indicator

for the first line is and for the second .

- A headset is connected to the phone.

- A loopset is connected to the phone.

- The connection to a Bluetooth headset has been lost.

- A data call is active.

- A GPRS or EDGE packet data connection is available.

- A GPRS or EDGE packet data connection is active.

- Shown when the packet data connection is on hold.

These icons are shown instead of the signal strength

indicator (shown in the top left corner in the standby

mode). See Packet data connections in GSM and UMTS

networks, p. ’98’.

- An UMTS packet data connection is available.

- An UMTS packet data connection is active.

- An UMTS packet data connection is on hold.

- Bluetooth is active.

- Data is being transmitted using Bluetooth. See

Bluetooth connection

, p. ’87’.

- USB connection is active.

R0915_en.book Page 15 Tuesday, February 8, 2005 11:46 AM

Your phone

Clock

Options in Clock:

Set alarm, Reset alarm,

Remove alarm, Settings,

Help, and Exit.

Press and select Clock.

• To set a new alarm, select Options→ Set alarm. Enter the alarm time, and press OK.

When the alarm is active, the indicator is shown.

• To turn off the alarm, press Stop. When the alarm tone sounds, press any key or Snooze

to stop the alarm for five minutes, after which it will resume. You can do this a

maximum of five times.

If the alarm time is reached while the device is switched off, the device switches itself on

and starts sounding the alarm tone. If you press Stop, the device asks whether you want

to activate the device for calls. Press No to switch off the device or Yes to make and receive

calls. Do not press Yes when wireless phone use may cause interference or danger.

• To cancel an alarm, select Clock→ Options→ Remove alarm.

Clock settings

• To change the clock settings, select Options→ Settings in Clock.

• To change the clock shown in the standby mode, scroll down and select Clock type→

Analogue or Digital.

• To allow the mobile phone network to update the time, date, and time zone information

to your phone (network service), scroll down and select Auto time update. For the Auto

time update setting to take effect, the phone restarts.

• To change the alarm tone, scroll down and select Clock alarm tone.

• To change the daylight saving time status, scroll down and select Daylight-saving.

Select On to add one hour to the My home city time. See My home city, p. ’17’

. When

the Daylight-saving is active, the indicator is shown in the Clock main view.

R0915_en.book Page 16 Tuesday, February 8, 2005 11:46 AM

Your phone

World clock

Open Clock and press to open the World clock view. In the World clock view you can

view the time in different cities.

• To add cities to the list, select Options→ Add city. Enter the first letters of the city

name. The search field appears automatically, and the matching cities are displayed.

Select a city. You can add a maximum of 15 cities to the list.

• To set your current city, scroll to a city, and select Options→ My home city. The city is

displayed in the Clock main view and the time in your phone is changed according to

the city selected. Check that the time is correct and matches your time zone.

Volume control and built-in loudspeaker

• To increase or decrease the volume level, when you have an active call or are listening

to a sound, press or , respectively.

The built-in loudspeaker allows you to speak and listen to the phone from a short distance

without having to hold the phone to your ear, for example, having it on a table nearby.

Sound applications use the loudspeaker by default.

• To locate the loudspeaker, see the Quick Start Guide, ‘Keys and parts’.

• To use the loudspeaker during a call, start a call, and press .

Important: Do not hold the phone near your ear when the loudspeaker is in use,

because the volume may be extremely loud.

• To turn off the loudspeaker, when you have an active call or are listening to a sound,

press .

File manager - managing memory

Many features of the phone use memory to store data. These features include contacts,

messages, images, ringing tones, calendar and to-do notes, documents, and downloaded

Fig. 2 Navigation bar

shows the speaker in

use: Handset or

Loudsp..

R0915_en.book Page 17 Tuesday, February 8, 2005 11:46 AM

Your phone

applications. The free memory available depends on how much data is already saved in the

phone memory. You can use a memory card as extra storage space. Memory cards are

re-writable, so you can delete and save data on a memory card.

• To browse files and folders in the phone memory or on a memory card (if inserted), press

and select Organiser→ File mgr.. The phone memory view ( ) opens. Press

to open the memory card view ( ).

• To move or copy files to a folder, press and at the same time to mark a file,

and select Options→ Move to folder or Copy to folder.

Icons in File manager:

- folder,

- folder that has a

subfolder.

• To find a file, select Options→ Find, select the memory from which to search, and enter

a search text that matches the file name.

Viewing memory consumption

• To view what types of data you have in the phone and how much memory the different

data types consume, select Options→ Memory details. Scroll down to Free memory to

view the amount of free memory in the phone.

• To view the amount of free memory on the memory card, if you have a card inserted in

the phone, press to open the memory card view, and select Options→ Memory

details. See Fig. 3, p. ’19’

Tip! You can use

Nokia Phone Browser

available in Nokia PC

Suite to view the

different memories in

your phone. See the

CD-ROM supplied in the

sales package.

Memory low - freeing memory

The phone notifies you if the phone memory or memory card memory is getting low.

• To free phone memory, transfer data to a memory card in the File manager. Mark files

to be moved, and select Move to folder, select memory card, and a folder.

• To remove data to free memory, use the File manager application, or go to the

respective application. For example, you can remove:

• messages from the Inbox, Drafts, and Sent folders in Messaging

• retrieved e-mail messages from the phone memory

• saved Web pages

R0915_en.book Page 18 Tuesday, February 8, 2005 11:46 AM

Your phone

• saved images, videos, or sound files

• contact information

•calendar notes

• downloaded applications, see also Application manager, p. ’107’.

• any other data that you no longer need.

Memory card tool

Note: This device uses Reduced Size Dual Voltage (1.8/3V) MultiMediaCard (MMC).

To ensure interoperability, use only dual voltage MMCs. Check the compatibility of

an MMC with its manufacturer or provider.

Press and select Organiser→ Memory. You can use a memory card as extra storage

space. See Quick Start Guide, ‘Inserting the memory card’. You can also back up

information from phone memory and restore the information to the phone later.

You cannot use the memory card if the door of the memory card slot is open.

Options in

Memory card: Backup

phone mem., Restore

from card, Format mem.

card, Memory card

name, Memory details,

Help, and Exit.

Keep all memory cards out of the reach of small children.

Do not open the memory card slot door in the middle of an operation. Opening the slot door

may damage the memory card as well as the device, and data stored on the card may be

corrupted.

Use only compatible Multimedia cards (MMC) with this device. Other memory cards, such

as Secure Digital (SD) cards, do not fit in the MMC card slot and are not compatible with

this device. Using an incompatible memory card may damage the memory card as well as

the device, and data stored on the incompatible card may be corrupted.

• To backup information from phone memory to a memory card, select Options→

Backup phone mem..

• To restore information from the memory card to the phone memory, select Options→

Restore from card.

Fig. 3 Memory

consumption of the

memory card.

R0915_en.book Page 19 Tuesday, February 8, 2005 11:46 AM

Your phone

Formatting a memory card

When a memory card is formatted, all data on the card is permanently lost.

Tip! To rename a

memory card, go to

Memory card and select

Options→ Memory card

name.

Some memory cards are supplied preformatted and others require formatting. Consult your

retailer to find out if you must format the memory card before you can use it.

To format a memory card, select Options→ Format mem. card. Select Yes to confirm.

When formatting is complete, enter a name for the memory card, and press OK.

R0915_en.book Page 20 Tuesday, February 8, 2005 11:46 AM

Making calls

Making a voice call

Tip! To increase or

decrease the volume

during a call, press or

1 In the standby mode, enter the phone number, including the area code. Press to

remove a number.

For international calls, press twice for the + character (replaces the

international access code), and enter the country code, area code (omit the leading zero

if necessary), and phone number.

2 Press to call the number.

3 Press to end the call (or to cancel the call attempt).

Tip! To change the

phone number of your

voice mailbox, press

and select Tools→ Voice

mail and select

Options→ Change

number. Enter the

number (obtained from

your service provider) and

press OK.

Pressing will always end a call, even if another application is active.

Making a call from the Contacts application - Press and select Contacts. Scroll to the

desired name; or enter the first letters of the name to the Search field. Matching contacts

are listed. Press to call. Select the call type Voice call.

Calling your voice mailbox (network service) - To call your voice mailbox, press and hold

in the standby mode. See also Call diverting

, p. ’104’.

Calling a recently dialled number - In the standby mode, press to access a list of the

20 last numbers you called or attempted to call. Scroll to the number you want, and press

to call the number.

Making a video call

When you make a video call, you can see a real-time, two-way video between you and the

recipient of the call. See Figure 4. The video image captured by the camera in your phone

will be shown to the video call recipient.

R0915_en.book Page 21 Tuesday, February 8, 2005 11:46 AM

Making calls

Tip! With Nokia Video Call Stand PT-8, you can view your own image and the other

caller’s image from your phone display during a video call.

To be able to make a video call, you need to have a USIM card and be in the coverage of a

UMTS network. For availability of and subscription to video call services, contact your

network operator or service provider. A video call can only be made between two parties.

The video call can be made to a compatible mobile phone or an ISDN client. Video calls

cannot be made while there is another voice, video, or data call active.

1 To start a video call, enter the phone number in the standby mode, or go to Contacts,

and select a contact. Then select Options→ Call→ Video call.

2 Starting a video call may take a while. A note Waiting for image is shown.

If the call is not successful, for example, video calls are not supported by the network,

or the receiving device is not compatible, you will be asked if you want to try a normal

call or send a message instead.

3 The video call is active when you can see two video images and hear the sound through

the loudspeaker. The call recipient may deny video sending ( ), in which case you may

see a still image or no image at all. You will hear the sound.

Icons:

- the video call

recipient has denied video

sending from his device.

- you have denied

video sending from your

phone.

Select Enable/Disable: Sending video, Sending audio or Sending audio & video if you

want to change between showing video or hearing only sound.

Select Zoom in or Zoom out; or press and to zoom your own image. Zoom

indicator is shown on the top of the display.

4 To end the video call, press .

Note: Even if you have denied video sending during a video call, the call will still

be charged as a video call. Check the pricing with your network operator or service provider.

Tip! To speed dial a

number by pressing and

holding the key, press

and select Tools→

Settings→ Call and set

Speed dialling→ On.

Speed dialling a phone number

• To assign a phone number to one of the speed dialling keys ( - ), press

and select Tools→ Speed dial. is reserved for the voice mailbox.

• To call: In standby mode, press the speed dial key and .

Fig. 4 Making a video

call.

R0915_en.book Page 22 Tuesday, February 8, 2005 11:46 AM

Making calls

Making a conference call (network service)

1 Make a call to the first participant.

2 To make a call to another participant, select Options→ New call. The first call is

automatically put on hold.

3 When the new call is answered, join the first participant in the conference call. Select

Options→ Conference.

• To add a new person to the call, repeat step 2, and select Options→ Conference→

Add to conference. The phone supports conference calls between a maximum of six

participants, including yourself.

• To have a private conversation with one of the participants, select Options→

Conference→ Private. Select a participant and press Private. The conference call is

put on hold on your phone. The other participants can still continue the conference

call. Once you have finished the private conversation, select Options→ Add to

conference to return to the conference call.

• To drop a participant, select Options→ Conference→ Drop participant, scroll to the

participant, and press Drop.

4 To end the active conference call, press .

Answering or rejecting a call

• To answer the call, press .

• To mute the ringing tone when a call comes in, press Silence.

Tip! If a compatible

headset is connected to

the phone, you can

answer and end a call by

pressing the headset key.

• If you do not want to answer a call, press to reject it. The caller will hear a line busy

tone. If you have activated the Call divert→ If busy function to divert calls, rejecting

an incoming call will also divert the call. See Call diverting

, p. ’104’.

When you reject an incoming call, you can also send a text message to the caller

informing why you could not answer the call. Select Options→ Send text message.

You can edit the text before sending it. See also Reject call with SMS, p. ’96’.

R0915_en.book Page 23 Tuesday, February 8, 2005 11:46 AM

Making calls

Answering or rejecting a video call

When a video call arrives, you can see the icon .

1 Press to answer the video call. Allow video image to be sent to caller? is shown.

If you select Yes, the image being captured by the camera in your phone is shown to

the caller. If you select No, video sending is not activated, and a still image or no image

is shown. You will hear the sound. See Tools

, Image in video call, p. ’97’.

2 To end the video call, press .

Call waiting (network service)

You can answer a call while you have another call in progress if you have activated the Call

waiting function in Tools→ Settings→ Call→ Call waiting (see also p. ’24’

Tip! To change the

phone tones for different

environments and events,

for example, when you

want your phone to be

silent, see Profiles -

setting tones, p. ’12’.

• To answer the waiting call, press . The first call is put on hold.

• To switch between the two calls, press Swap. Select Options→ Transfer to connect an

incoming call or a call on hold with an active call and to disconnect yourself from the

calls. To end the active call, press . To end both calls, select Options→ End all calls.

Options during a call

Many of the options that you can use during a call are network services. Press Options

during a call for some of the following options: Mute or Unmute, Answer, Reject, Swap,

Hold or Unhold, Activate handset, Activate loudsp., or Activate handsfree (if a compatible

Bluetooth headset is attached), End active call or End all calls, New call, Conference, and

Transfer. Select:

Tip! You can add

DTMF tones to the Phone

number or DTMF fields in

a contact card.

• Replace - to end an active call and replace it by answering the waiting call.

• Send MMS (in UMTS networks only) - to send an image or a video in a multimedia

message to the other participant of the call. You can edit the message and change the

recipient before sending. Press to send the file to a compatible device (network

service).

R0915_en.book Page 24 Tuesday, February 8, 2005 11:46 AM

Making calls

• Send DTMF - to send DTMF tone strings, for example, a password. Enter the DTMF

string or search for it in Contacts. To enter a wait character (w) or a pause character

(p), press repeatedly. Press OK to send the tone.

Log

Recent calls

To monitor the phone numbers of missed, received, and dialled calls, press and select

Log→ Recent calls. The phone registers missed and received calls only if the network

supports these functions, the phone is switched on, and within the network’s service area.

Tip! When you see a

note in standby mode

about missed calls, press

Show to access the list of

missed calls. To call back,

scroll to a name or

number, and press .

Erasing recent call lists - To clear all recent call lists, select Options→ Clear recent calls

in the Recent calls main view. To clear one of the call registers, open the register you want

to erase, and select Options→ Clear list. To clear an individual event, open a register, scroll

to the event, and press .

Call duration

To monitor the approximate duration of your incoming and outgoing calls, press and

select Log→ Call duration.

Note: The actual time invoiced for calls by your service provider may vary,

depending on network features, rounding off for billing, and so forth.

Clearing call duration timers - Select Options→ Clear timers. For this you need the lock

code, see Security

, Phone and SIM, p. ’101’.

R0915_en.book Page 25 Tuesday, February 8, 2005 11:46 AM

Making calls

Packet data

To check the amount of data sent and received during packet data connections, press

and select Log→ Packet data. For example, you may be charged for your packet data

connections by the amount of data sent and received.

Icons:

- incoming,

- outgoing, and

- missed

communication events.

Monitoring all communication events

To monitor all voice and video calls, text messages, or data connections registered by the

phone, press and select Log, and press to open the general log. See Fig. 5. For each

communication event, you can see the sender or recipient name, phone number, name of

the service provider, or access point. You can filter the general log to view just one type of

event and create new contact cards based on the log information.

Tip! To view a list of

sent messages, press

and select Messaging →

Sent.

Subevents, such as a text message sent in more than one part and packet data

connections, are logged as one communication event. Connections to your mailbox,

multimedia messaging centre, or Web pages are shown as packet data connections.

Note: When sending messages, your phone may display the word “Sent“. This is an

indication that the message has been sent by your phone to the message centre

number programmed into your phone. This is not an indication that the message has

been received at the intended destination. For more details about messaging

services, check with your service provider.

• To filter the log, select Options→ Filter. Scroll to a filter and press Select.

• To erase the contents of the log, Recent calls register, and Messaging delivery reports

permanently, select Options→ Clear log. Press Yes to confirm.

•To set the Log duration, go to Options→ Settings→ Log duration. The log events

remain in the phone memory for a set number of days after which they are

automatically erased to free memory. If you select No log, all the log contents, Recent

calls register, and Messaging delivery reports are permanently deleted.

Fig. 5 General log of

communication events.

R0915_en.book Page 26 Tuesday, February 8, 2005 11:46 AM

Making calls

Packet data counter and connection timer: To view how much data, measured in

kilobytes, has been transferred and how long a certain packet data connection has lasted,

scroll to an incoming or outgoing event indicated by Pack., and select Options→ View

details.

R0915_en.book Page 27 Tuesday, February 8, 2005 11:46 AM

Contacts (Phonebook)

Options in the

Contacts directory: Open,

Call, Create message, New

contact, Open conversation,

Edit, Delete, Duplicate,

Add to group (shown if you

have created a group),

Belongs to groups (shown

if you have created a

group), Mark/Unmark,

Copy, SIM contacts, Go to

web address, Send,

Contacts info, Settings,

Help, and Exit.

Press and select Contacts. In Contacts you can add a personal ringing tone, voice tag,

or a thumbnail image to a contact card. You can also create contact groups, which allow

you to send text messages or e-mail to many recipients at the same time. You can add

received contact information (business cards) to Contacts. See Receiving logos, tones,

business cards, calendar entries, and settings, p. ’52’. Contact information can only be sent

to or received from compatible devices.

Saving names and numbers

1 Select Options→ New contact.

2 Fill in the fields that you want, and press Done.

• To edit contact cards in Contacts, scroll to the contact card you want to edit, and select

Options→ Edit.

• To delete a contact card in Contacts, select a card, and press . To delete several

contact cards at the same time, press and to mark the contacts, and press

to delete.

Options when

editing a contact card:

Add thumbnail, Remove

thumbnail, Add detail,

Delete detail, Edit label,

Help, and Exit.

• To attach a small thumbnail image to a contact card, open the contact card and select

Options→ Edit. Then select Options→ Add thumbnail. The thumbnail image is shown

when the contact calls.

Using default numbers and addresses

You can assign default numbers or addresses to a contact card. In this way if a contact

has several numbers or addresses, you can easily call or send a message to the contact into

a certain number or address.

1 In Contacts, select a contact, and press .

R0915_en.book Page 28 Tuesday, February 8, 2005 11:46 AM

Contacts (Phonebook)

Tip! You can add and

edit contact cards using

Nokia Contacts Editor

available in Nokia PC

Suite. See the CD-ROM

supplied in the sales

package.

2 Select Options→ Defaults.

3 Select a default to which you want to add a number or an address, and press Assign.

4 Select a number or an address you want to set as a default, and press Select.

The default number or address is underlined in the contact card.

Copying contacts between the SIM card and

device memory

Tip! To send contact

information, select the

card you want to send.

Select Options→ Send→

Via text message, Via

multimedia or Via

Bluetooth. See the

Messaging

chapter, and

Sending data using

Bluetooth, p. ’88’.

• To copy names and numbers from a SIM card to your phone, press and select

Contacts→ Options→ SIM contacts→ SIM directory. Select the names you want to

copy, and select Options→ Copy to Contacts.

• To copy a telephone, fax, or pager number from Contacts to your SIM card, select

Contacts, and open a contact card. Scroll to the number, and select Options→ Copy to

SIM direct..

SIM directory and other SIM services

Note: For availability, rates, and information on using SIM services, contact your

SIM card vendor (network operator, service provider or other vendor).

Press and select Contacts→ Options→ SIM contacts→ SIM directory to see the

names and numbers stored on the SIM card. In SIM directory you can add, edit, or copy

numbers to Contacts, and you can make calls.

Adding ringing tones for contacts

When a contact or group member calls you, the phone plays the chosen ringing tone (if the

caller’s telephone number is sent with the call and your phone recognises it).

R0915_en.book Page 29 Tuesday, February 8, 2005 11:46 AM

Contacts (Phonebook)

Tip! Speed dialling is

a quick way to call

frequently used numbers.

You can assign speed

dialling keys to eight

phone numbers. See

“Speed dialling a phone

number”, p.’22’.

1 Press to open a contact card or go to the Groups list and select a contact group.

2 Select Options→ Ringing tone. A list of ringing tones opens.

3 Select the ringing tone you wish to use for the individual contact or the selected group.

To remove the ringing tone, select Default tone from the list of ringing tones.

Voice dialling

You can make a phone call by saying a voice tag that has been added to a contact card.

Any spoken words can be a voice tag.

Tip! You can

synchronise your contacts

to a compatible PC with

Nokia PC Suite. See the

CD-ROM supplied in the

sales package.

Before using voice tags, note that:

• Voice tags are not language-dependent. They are dependent on the speaker's voice.

• You must say the name exactly as you said it when you recorded it.

• Voice tags are sensitive to background noise. Record voice tags and use them in a quiet

environment.

• Very short names are not accepted. Use long names and avoid similar names for

different numbers.

Note: Using voice tags may be difficult in a noisy environment or during an

emergency, so you should not rely solely upon voice dialling in all circumstances.

Example: You can use

a person’s name as a voice

tag (for example, ’John’s

mobile’.

Adding a voice tag to a phone number

You can have only one voice tag per contact card. You can add a voice tag to up to 50

phone numbers.

1 In Contacts, open the contact card to which you want to add a voice tag.

Tip! To view a list of

voice tags you have

defined, select Options→

Contacts info→ Voice

tags in Contacts.

2 Scroll to the number to which you want to add the voice tag and select Options→ Add

voice tag.

3 Press Start to record a voice tag. After the starting tone, say clearly the words you want

to record as a voice tag. Wait until the phone plays the recorded tag and saves it. A

R0915_en.book Page 30 Tuesday, February 8, 2005 11:46 AM

Contacts (Phonebook)

symbol can be seen next to the number in the contact card indicating that a voice

tag has been added to it.

Tip! To listen to,

change, or delete a voice

tag, open a contact card

and scroll to the number

that has a voice tag

(indicated by ). Select

Options→ Voice tag.

Then select either

Playback, Change, or

Delete.

Making a call by saying a voice tag

You must say the voice tag exactly as you said it when you recorded it. When you are

making a call by saying a voice tag, the loudspeaker is in use. Hold the phone at a short

distance away and say the voice tag clearly.

• Press and hold . A short tone is played and the note Speak now is displayed. The

phone plays the original voice tag, displays the name and number, and dials the number

of the recognised voice tag.

Creating contact groups

1 In Contacts, press to open the Groups list.

2 Select Options→ New group.

3 Write a name for the group or use the default name Group %N and press OK.

4 Open the group, and select Options→ Add members.

Options in the Groups

list view: Open, New

group, Delete, Rename,

Ringing tone, Contacts

info, Settings, Help, and

Exit.

5 Scroll to a contact, and press to mark it. To add multiple members at a time, repeat

this action on all the contacts you want to add.

6 Press OK to add the contacts to the group.

To rename a group, select Options→ Rename. Then enter the new name, and press OK.

Removing members from a group

1 In the Groups list, open the group you want to modify.

2 Scroll to the contact, and select Options→ Remove from group.

3 Press Yes to remove the contact from the group.

Tip! To check to which groups a contact belongs, scroll to the contact, and select

Options→ Belongs to groups.

R0915_en.book Page 31 Tuesday, February 8, 2005 11:46 AM

Camera and Gallery

Camera

Shortcut: Press in the

standby mode to open

Camera.

With the Camera application you can take pictures and record videos while on the move.

The images and video are automatically saved in the Gallery application. The camera

produces JPEG images, and video clips are recorded in the 3GPP file format with the .3gp

file extension. You can also send images or a video in a multimedia message, as an e-mail

attachment, or using a Bluetooth connection.

Tip! You can insert an

image into a contact card.

See Saving names and

numbers, p. ’28’.

The Nokia 6630 device supports an image capture resolution of up to 1280 x 960 pixels.

The image resolution in these materials may appear different.

Taking pictures

Options before

taking a picture: Capture,

New, Activate night mode /

Deact. night mode,

Sequence mode / Normal

mode, Self-timer, Go to

Gallery, Adjust, Settings,

Help, and Exit.

1 Press in the standby mode. The Camera application opens, and you can see the

view to be captured. See Figure. Press or to move between Image and Video

views.

1.Indicator shows where the images will be saved: to

phone memory ( ) or memory card ( ).

2.Shows an approximate estimate of how many

images, depending on the selected image quality, fit in

the memory of your phone or the memory card. See

Image quality, p. ’34’.

3.The zoom indicator shows the zoom level. Press

to zoom in, press to zoom out.

4.Night mode active indicator .

5.The sequence mode indicator . See p. ’34’

R0915_en.book Page 32 Tuesday, February 8, 2005 11:46 AM

Camera and Gallery

6. The self-timer indicator shows how much time is left before a picture is taken.

See p. ’34’

Shortcuts:

Press to activate or

deactivate Night mode.

Press to activate or

deactivate Sequence

mode.

Press to adjust

brightness.

Press to adjust

contrast.

2 To take a picture, press . Do not move the phone before the Camera application

starts to save the image. The image is saved automatically in the Images folder of

Gallery. See Gallery, p. ’36’.

Saving the captured image may take longer if you have changed the zoom, brightness, or

contrast settings. See Taking pictures

, p. ’32’ for zoom level, and When taking a picture,

p. ’33’

for adjusting brightness and contrast.

When taking a picture:

• It is recommended to use both hands to keep the camera still.

• To take images or record video in a dark environment, use the Night mode. If you are

using the Night mode, the exposure time is longer and the camera needs to be kept still

longer.

• To adjust brightness or contrast before taking a picture, select Options→ Adjust→

Brightness or Contrast.

• The resolution of a zoomed picture is lower than that of a non-zoomed picture, but the

image remains the same size. You may notice the difference in image quality if viewed

on a PC, for example.

• Camera goes into battery saving mode if there are no key presses within a minute. To

continue taking pictures, press .

After the image has been taken:

• If you do not want to keep the image, press .

• To return to the viewfinder to take a new picture, press .

• To send the image Via multimedia, via e-mail, or via Bluetooth, press . For more

information see the Messaging

chapter, p. ’45’ and Bluetooth connection, p. ’87’.

• To set the picture as wallpaper in the standby mode, select Options→ Set as wallpaper.

Fig. 6 Pictures taken in

a sequence.

R0915_en.book Page 33 Tuesday, February 8, 2005 11:46 AM

Camera and Gallery

Taking pictures in a sequence

Select Options→ Sequence mode to set the camera to take 6 pictures in a sequence. After

the pictures have been taken, they are automatically saved in the Gallery, and they are

shown in a grid. See Fig. 6.

You in the picture - self-timer

Use the self-timer to delay the taking of a picture so that you can include yourself in the

picture. Select the self-timer delay: Options→ Self-timer→ 10 seconds, 20 seconds, or 30

seconds. Press Activate. You can see the self-timer indicator ( ) blink and hear a beep

when the timer is running. The camera will take the picture after the selected delay has

elapsed.

Adjusting camera settings

1 Select Options→ Settings→ Image.

2 Scroll to the setting you want to change:

Glossary: Resolution is a

measure of sharpness and

clarity of an image.

Resolution refers to the

number of pixels in an

image. The more pixels,

the more detailed the

picture is, and the more

memory it consumes.

• Image quality - High, Normal, and Basic. The better the image quality, the more

memory the image consumes. The resolution of a zoomed picture is lower than that

of a non-zoomed picture, but the image remains the same size. You may notice the

difference in image quality if viewed on a PC, for example. If you are going to print

the image, select High or Normal image quality.

• Show captured image - Select Yes if you want to see the captured image after it has

been taken or No if you want to continue taking pictures immediately.

• Image resolution - Select the resolution you want to use for the images you are

going to take.

• Default image name - Set a default name for the images you are going to take. You

can replace date with your own text (for example, ‘Holiday_2004’).

• Memory in use - Select where to store your images.

R0915_en.book Page 34 Tuesday, February 8, 2005 11:46 AM

Camera and Gallery

Recording videos

1 Press Camera in the standby mode.

2 Press or to move between Image and Video views. Open the Video view. An

indicator shows where the video will be saved: to phone memory ( ) or memory card

().

3 Press to start recording. The record icon is shown.

Options before

recording a video: Record,

New, Activate night mode /

Deact. night mode, Mute /

Unmute, Go to Gallery,

Adjust, Settings, Help, and

Exit.

1. The elapsed time / time left with the current video

length setting.

2.The zoom indicator shows the zoom level. Press

to zoom in on your subject before or during recording.

Press to zoom out.

3. Microphone muted indicator .

4. Night mode active indicator .

To pause recording at any time, press . The pause

icon starts to blink on the display. Press again

to resume recording.

Shortcuts:

Press to activate or

deactivate Night mode.

Press to adjust

brightness.

Press to adjust

contrast.

Video recording is automatically stopped if recording is set to pause and there are no

key presses within a minute.

4 Press Stop to stop recording. The video clip is automatically saved to the Video clips

folder of the Gallery. See Gallery

, p. ’36’.

After a video clip has been recorded:

• To immediately play the video clip you just recorded, select Options→ Play.

• If you do not want to keep the video, press .

• To return to the viewfinder to record a new video, press .

• To send the video Via multimedia, via e-mail, or via Bluetooth, press . For more

information see the Messaging

chapter, p. ’45’ and Bluetooth connection, p. ’87’.

R0915_en.book Page 35 Tuesday, February 8, 2005 11:46 AM

Camera and Gallery

Adjusting video recorder settings

Select Options→ Settings→ Video and the setting you want to change:

• Length - If you select Maximum, the length of the video recording is restricted to one

hour per clip. Select Short to record video clips up to 300 kB, which is approximately

30 seconds in duration, so that they can be conveniently sent as a multimedia message

to a compatible device. Some networks, however, may only support sending of

multimedia messages with the maximum size of 100 kB.

• Video resolution, Default video name and Memory in use.

Gallery

Tip! You can transfer

music files from a

computer to your MMC

card using Nokia Audio

Manager available in

Nokia PC Suite. See the

CD-ROM supplied in the

sales package.

Press and select Gallery. In the Gallery application you can store and organise your

images, sound clips, playlists, video clips, streaming links, and .ram files.

Select Images , Video clips , Tracks , Sound clips , Links , or All files

, and press to open it.

You can browse, open, and create folders; and mark, copy and move items to folders.

Sound clips, video clips, .ram files, and streaming links are opened and played in the

RealPlayer application. See RealPlayer™

, p. ’41’.

Tip! To leave the

application open and

music playing in the

background, press

twice to return to the

standby mode. To return to

the application, press

and select Gallery.

• Press to open a file or a folder. Images are opened in the Image viewer. See

Viewing images

, p. ’37’.

• To copy or move files to the memory card or to phone memory, select a file and

Options→ Organise→ Copy to memory card / Move to memory card or Copy to phone

mem. / Move to phone mem.. Files stored on the memory card are indicated with .

• To download files into the Gallery in one of the main folders using the browser, select

Graphic downls., Video downlds., Track downlds., or Sound downlds.. The browser

opens, and you can choose a bookmark for the site to download from.

R0915_en.book Page 36 Tuesday, February 8, 2005 11:46 AM

Camera and Gallery

Tip! You can transfer

images from your phone to

a compatible PC with

Nokia Phone Browser

available in Nokia PC

Suite. See the CD-ROM

supplied in the sales

package.

• To search for a file, select Options→ Find. Start to enter a search string (for example,

the name or date of the file you are searching). Files that match your search are shown.

Viewing images

Pictures taken with the Camera application are stored in the Gallery. Images can also be

sent to you in a multimedia message, as an e-mail attachment, or through Bluetooth. To

be able to view a received image in Gallery, you need to save it in the phone memory or

on a memory card.

Open the Images folder in the Gallery to start the image viewer, select an image, and

press to view it.

Options when

viewing an image: Send,

Set as wallpaper, Rotate,

Zoom in / Zoom out, Full

screen, Delete, Rename,

View details, Add to 'Go

to', Help, and Exit.

• To zoom an image, select Options→ Zoom in (or press ) or Zoom out (or press

). You can see the zooming ratio at the top of the display. Press and hold

to return to the normal view. The zooming ratio is not stored permanently.

• To see more of the image, select Options→ Full screen (or press ). The panes

around the image are removed. To move the focus when you are zooming an image,

use the scroll key.

• To rotate the image, select Options→ Rotate (or press to rotate anticlockwise

and to rotate clockwise).

R0915_en.book Page 37 Tuesday, February 8, 2005 11:46 AM

Media

Video editor

To create custom video clips, press and select Media→ Vid. editor. You can create

custom video clips by combining and trimming video clips, and adding sound clips,

transitions, and effects. Transitions are visual effects that you can add in the beginning

and end of the video or between the video clips.

Editing video, sound, and transitions

1 Mark and select one or more video clips.

2 Select Options→ Edit. In the Edit video view, you can insert video clips to make a

custom video clip, and edit the clips by trimming and adding effects. You can add

sound clips and change their duration.

To modify the video, select one of the following options:

Preview - Previews the custom video clip.

Cut - Trims the video clip or a sound clip in the Cut video clip or in the Cut sound clip

view.

Insert :

• Video clip - Inserts the selected video clip. A thumbnail of the video clip is shown in

the Main view. A thumbnail consists of the first non-black view of the video clip.

The name and length of the selected video clip is also shown.

• Sound clip - Inserts the selected sound clip. The name and length of the selected

sound clip is shown in the Main view.

• New sound clip - Records a new sound clip to the selected location.

Fig. 7 The Edit video

view, where the

selected transition is

set to Dip to black.

R0915_en.book Page 38 Tuesday, February 8, 2005 11:46 AM

Media

Tip! To take a

snapshot of a video clip,

select Options→ Take

snapshot in the Play view,

Edit Preview view or in the

Cut view.

Edit video clip:

• Move - Moves the video clip to the selected location.

• Add colour effect - Inserts a colour effect on the video clip.

• Use slow motion - Slows the speed of the video clip.

• Mute sound / Unmute sound- Mutes or unmutes the original video clip sound.

• Remove - Removes the video clip from the video.

• Duplicate - Makes a copy of the selected video clip or sound clip.

• Edit sound clip:

• Move - Moves the sound clip to the selected location.

• Set duration - Edits the sound clip length.

• Remove - Removes the sound clip from the video.

• Duplicate - Makes a copy of the selected video clip or sound clip.

• Edit transition - There are three types of transitions: at the start of a video, at the

end of a video, and transitions between video clips. A start transition can be selected

when the first transition of the video is active.

3 Select Save to save your video. You can define the Memory in use in the Settings. The

default is the phone memory.

Tip! In the Settings

view you can define the

Default video name,

Default sc. shot name and

the Memory in use.

Select Send: Via multimedia, Via e-mail, or Via Bluetooth if you want to send the video.

Contact your service provider for details of the maximum multimedia message size that

you can send. If your video is too large to be sent in a multimedia message, a symbol

will appear.

Tip! If you want to send a video clip that is over the maximum multimedia message

size allowed by your service provider, you can send the clip using Bluetooth. Sending data

using Bluetooth, p. ’88’. You can also transfer your videos using Bluetooth into your

Bluetooth-enabled personal computer, or by using a memory card reader (internal/

external).

R0915_en.book Page 39 Tuesday, February 8, 2005 11:46 AM

Media

Movie director

To create muvees, press and select Media→ Movie. muvees are short, edited video

clips that can contain video, music and text. Quick muvee is created automatically by the

Movie director after you have selected the style for the muvee. Movie director uses the

default music and text associated with the chosen style. Every style has, for example, its

own font style, colour, music, and pace. To Custom muvee you can select your own video

and music clips, images and style, and you can also add an opening and closing message.

muvees can be sent using MMS.

Open Movie, and press or to move between the and views. You can

also return to the main view from the view by pressing Done.

The view contains a list of video clips that you can Play, Send, Rename, and Delete.

Tip! To download

new styles to your phone,

select Style downlds. from

the Movie director main

view.

• To create a quick muvee, select Quick muvee, and press . Select a style for the

muvee from the style list, and press . The created muvee will be saved in the Movie

director muvee list. The muvee will be played automatically after saving.

• To create a custom muvee, select Custom muvee. In Video, Image, Style, or Music, select

the clips you want to include in your muvee. In Message you can add an opening text

and a closing text to a muvee. Select Create muvee.:

• Multimedia message - the length of the muvee is optimised for MMS sending.

• Same as music - to set the muvee duration to be the same as the music clip chosen.

Options in the

muvee list options menu:

Play, Send, Rename, Delete,

Help and Exit.

• User defined - to define the length of the muvee.

Select Options→ Save.

• To preview the custom muvee before saving it, in Preview muvee view, select Options→

Play.

• To create a new custom muvee by using the same style settings, select Options→

Recreate.

R0915_en.book Page 40 Tuesday, February 8, 2005 11:46 AM

Media

• To add an opening text and a closing text to a custom muvee when you are creating it,

in Create muvee view select Message. Enter the opening message and the closing

message, and select Done.

Settings

Select Settings to edit the following options:

• Memory in use - Select where to store your muvees.

• Resolution - Select the resolution of your muvees.

• Default muvee name - Set a default name for the muvees.

Image mgr.

To browse your images visually, press and select Media→ Image mgr. See Fig. 8.

1 Press to select the memory: Phone or Memory card. Image manager also shows

how many folders or images are in the selected folder.

2 Open a folder to browse your images visually. Press and to move between

images and folders. Press to view an image.

• Press and simultaneously to mark images for an image show. A check mark

is shown next to a selected image. Select Options→ Image show. Press and

to view the next or previous image in the show.

Options in

RealPlayer when a clip is

selected: Play, Play in full

screen/Continue, Continue

in full scr.; Stop, Mute/

Unmute, Clip details, Send,

Settings, Help, and Exit.

Recorder

Press and select Media→ Recorder to record telephone conversations and voice

memos. If you are recording a telephone conversation, both parties will hear a tone every

five seconds during recording.

RealPlayer™

Press and select Media→ RealPlayer. With RealPlayer™ you can play video clips,

sound clips, and playlists, or stream media files over the air. A streaming link can be

Fig. 8 Images viewed in

Image manager.

R0915_en.book Page 41 Tuesday, February 8, 2005 11:46 AM

Media

activated when you are browsing Web pages, or it can be stored in the phone memory or

memory card.

RealPlayer supports files with the extensions such as .aac, .awb, .m4a, .mid, .mp3 and

.wav.However, RealPlayer does not necessarily support all file formats or all the variations

of file formats. For example, RealPlayer will attempt to open all .mp4 files, but some .mp4

files may include content that is not compliant with 3GPP standards and, therefore, is not

supported by this phone.

Playing video or sound clips

1 To play a media file stored in phone memory or memory card, select Options→ Open

and select:

Icons:

- Repeat,

- Random,

- Repeat and

random,

- Loudspeaker

muted

• Most recent clips - To play one of the last six files played in RealPlayer,

• Saved clip - To play a file saved in the Gallery. See Gallery, p. ’36’,

• Mem. card sound clips - To play a file saved in the memory card.

2 Scroll to a file, and press to play the file.

Tip! To view a video clip in full screen mode, press . Press again to change back

to normal screen mode.

Streaming content over the air

Tip! To leave the

application open and

music playing in the

background, press

twice to return to the

standby mode. To return to

the application, press

and select RealPlayer.

To stream live content, you must first configure your default access point. See Data

connections and access points, p. ’97’. Many service providers require you to use an

Internet access point (IAP) for your default access point. Other service providers allow you

to use a WAP access point. Contact your service provider for more information.

Note: In RealPlayer, you can only open an rtsp:// URL address. However, Browser is

able to open an http link to a .ram file, and pass it to RealPlayer.

R0915_en.book Page 42 Tuesday, February 8, 2005 11:46 AM

Media

Shortcuts during play:

To fast forward, press and

hold .

To rewind through the

media file, press and hold

To mute the sound, press

and hold until the

indicator is displayed. To

turn on the sound, press

and hold until you see

the indicator.

To stream content over the air, select a streaming link saved in the Gallery, on a Web page,

or received in a text message or multimedia message. Before live content begins

streaming, your phone will connect to the site and start loading the content.

Receiving RealPlayer settings

You may receive RealPlayer settings in a special text message from the network operator

or service provider. See Receiving logos, tones, business cards, calendar entries, and

settings, p. ’52’. For more information, contact your network operator or service provider.

Changing the RealPlayer settings

Select Options→ Settings:

Glossary: Proxy servers are

intermediate servers

between media servers

and their users. Some

service providers use them

to provide additional

security or speed up access

to browser pages that

contain sound or video

clips.

Video - To have RealPlayer automatically repeat video clips after they finish playing.

Audio settings - To select if you want to repeat playing of track lists and play sound clips

on a track list in random order.

Connection settings - To select whether to use a proxy server, change the default access

point, and set the time-outs and port range used when connecting. Contact your service

provider for the correct settings.

• Proxy settings:

• Use proxy - To use a proxy server, select Yes.

• Proxy serv. address - Enter the IP address of the proxy server.

• Proxy port number - Enter the port number of the proxy server.

• Network settings:

• Default access point - Scroll to the access point you want to use to connect to the

Internet, and press .

• Online time - Set the time for RealPlayer to disconnect from the network when you

have paused a media clip playing through a network link, select User defined, and

press . Enter the time, and press OK.

R0915_en.book Page 43 Tuesday, February 8, 2005 11:46 AM

Media

• Connection time-out - Press or to set the maximum time to elapse

between selecting a network link and connecting to the media server, and press OK.

• Server time-out- Press or to set the maximum time to wait for a response

from the media server before disconnecting, and press OK.

• Lowest UDP port - Enter the lowest port number of the server's port range. The

minimum value is 6970.

• Highest UDP port - Enter the highest port number of the server's port range. The

maximum value is 32000.

Select Options→ Advanced settings to edit the bandwidth values for different

networks.

R0915_en.book Page 44 Tuesday, February 8, 2005 11:46 AM

Messaging

Options in the

Messaging main view:

Open, Create message,

Connect (shown if you

have defined mailbox

settings) / Disconnect

(shown if a connection to

mailbox is active), SIM

messages, Cell

broadcast, Service

command, Settings,

Help, and Exit.

Press and select Messaging. In Messaging, you can create, send, receive, view, edit, and

organise text messages, multimedia messages, e-mail messages, and special text messages

containing data. You can also receive messages and data through Bluetooth, receive Web

service messages, cell broadcast messages as well as send service commands.

Note: These functions can only be used if they are supported by your network

operator or service provider. Only devices that offer compatible multimedia

message, or e-mail features can receive and display these messages. Some networks

might provide the recipient device with a Web page link to view multimedia

messages.

When you open Messaging, you can see the New message function and a list of folders:

Inbox - contains received messages except e-mail and cell broadcast messages.

E-mail messages are stored in the Mailbox.

Tip! Organise your

messages by adding new

folders under My folders.

My folders - for organising your messages into folders.

Mailbox - In Mailbox you can connect to your remote mailbox to retrieve your new

e-mail messages or view your previously retrieved e-mail messages offline. See Settings for

e-mail, p. ’59’.

Tip! When you have

opened any of the default

folders, you can switch

between the folders by

pressing or .

Drafts - stores draft messages that have not been sent.

Sent - stores the last 15 messages that have been sent excluding messages sent

using Bluetooth. To change the number of messages to be saved, see Other settings

, p. ’62’.

Outbox - is a temporary storage place for messages waiting to be sent.

Reports- You can request the network to send you a delivery report of the text

messages and multimedia messages you have sent (network service). Receiving a delivery

R0915_en.book Page 45 Tuesday, February 8, 2005 11:46 AM

Messaging

report of a multimedia message that has been sent to an e-mail address might not be

possible.

• To enter and send service requests (also known as USSD commands), such as activation

commands for network services, to your service provider, select Messaging→

Options→ Service command in the main view of Messaging.

Options in Cell

broadcast: Open,

Subscribe /Unsubscribe,

Hotmark / Remove

hotmark, Topic, Settings,

Help, and Exit.

• Cell broadcast is a network service that allows you to receive messages on various

topics, such as weather or traffic conditions from your service provider. For available

topics and relevant topic numbers, contact your service provider. In the main view of

Messaging, select Options→ Cell broadcast. In the main view you can see the status

of a topic, a topic number, name, and whether it has been flagged ( ) for follow-up.

Cell broadcast messages cannot be received in UMTS networks. A packet data

connection may prevent cell broadcast reception.

Writing text

Traditional text input

Icons: and

indicate the

selected case.

means that the first letter

of the word, is written in

upper case, and all the

other letters will

automatically be written

in lower case.

indicates number mode.

The indicator is shown on the top right of the display when you are writing text

using traditional text input.

• Press a number key ( - ) repeatedly until the desired character appears.

There are more characters available for a number key than are printed on the key.

• To insert a number, press and hold the number key.

• To switch between letter and number mode, press and hold .

• If the next letter is located on the same key as the present one, wait until the cursor

appears (or press to end the time-out period), and enter the letter.

• To erase a character, press . Press and hold to clear more than one character.

• The most common punctuation marks are available under . Press

repeatedly to reach the desired punctuation mark.

R0915_en.book Page 46 Tuesday, February 8, 2005 11:46 AM

Messaging

Press to open a list of special characters. Use to move through the list, and

press Select to select a character.

• To insert a space, press . To move the cursor to the next line, press

three times.

• To switch between the different character cases Abc, abc, and ABC, press .

Predictive text input - Dictionary

You can enter any letter with a single keypress. The predictive text input is based on

a built-in dictionary to which you can also add new words. When the dictionary becomes

full, the latest added word replaces the oldest.

1 To activate predictive text input, press , and select Dictionary on. This will activate

predictive text input for all editors in the phone. The indicator is shown on the

top right of the display when you are writing text using predictive text input.

2 To write the desired word, press the keys - . Press each key only once for

one letter. For example, to write ‘Nokia’ when English dictionary is selected,

press for N, for o, for k, for i, and for a.

See the Fig. 9. The word suggestion changes after each key press.

3 When you have finished writing the word and it is correct, confirm it by pressing

or add a space by pressing .

• If the word is not correct, press repeatedly to view the matching words the

dictionary has found one by one. Or, press and select Dictionary→ Matches.

• If the ? character is shown after the word, the word you intended to write is not in

the dictionary. To add a word to the dictionary, press Spell, enter the word (up to

32 letters) using traditional text input, and press OK. The word is added to the

dictionary. When the dictionary becomes full, a new word replaces the oldest added

word.

4 Start writing the next word.

Tip! To set predictive text input on or off, press twice quickly.

Fig. 9 The word match is

evolving, wait until you

have keyed in the whole

word before you check

the results.

R0915_en.book Page 47 Tuesday, February 8, 2005 11:46 AM

Messaging

Tips on using predictive text input

• To erase a character, press . Press and hold to clear more than one character.

• To change between the different character cases Abc, abc, and ABC, press . If

you press quickly twice, the predictive text input is turned off.

Tip! The predictive

text input will try to

guess which commonly

used punctuation mark

(.,?!‘) is needed. The order

and availability of the

punctuation marks

depend on the language

of the dictionary.

• To insert a number in letter mode, press and hold the desired number key.

To switch between letter and number mode, press and hold .

• The most common punctuation marks are available under . Press and then

repeatedly to search for the desired punctuation mark.

• Press and hold to open a list of special characters.

• Press repeatedly to view the matching words the dictionary has found one by

one.

•Press , select Dictionary, and press to select one of the following options:

Matches to view a list of words that correspond to your key presses.

Insert word to add a word (up to 32 letters) to the dictionary by using traditional text

input. When the dictionary becomes full, a new word replaces the oldest added word.

Edit word to edit the word using traditional text input. This is available if the word is

active (underlined).

Tip! When you press , the following options appear (depending on the editing

mode): Dictionary (predictive text input), Alpha mode (traditional text input),

Number mode, Cut (if text has been selected), Copy (if text has been selected),

Paste (when text has been cut or copied first), Insert number, Insert symbol, and

Writing language: (changes the input language for all editors in the phone).

Writing compound words

Write the first half of a compound word; to confirm it, press . Write the last part of the

compound word. To complete the compound word, press to add a space.

Turning predictive text input off

Press , and select Dictionary→ Off to turn predictive text input off for all editors in

the phone.

R0915_en.book Page 48 Tuesday, February 8, 2005 11:46 AM

Messaging

Copying text to clipboard

1 To select letters and words, press and hold . At the same time, press or . As

the selection moves, text is highlighted.

2 To copy the text to clipboard, while still holding , press Copy.

3 To insert the text into a document, press and hold , and press Paste. Or, press

once, and select Paste.

• To select lines of text, press and hold . At the same time press or .

• To remove the selected text from the document, press .

Writing and sending messages

The appearance of a multimedia message may vary depending on the receiving device.

being copied, modified, transferred, or forwarded.

Tip! You can start to

create a message from

any application that has

the option Send. Select a

file (an image, text) to be

added to the message,

and select Options→

Send.

Before you can create a multimedia message or write an e-mail, you must have the correct

connection settings in place. See Receiving MMS and e-mail settings

, p. ’51’ and Settings

for e-mail, p. ’59’.

1 Select New message. A list of message options opens.

• Text message - to send a text message.

• Multimedia message - to send a multimedia message (MMS).

• E-mail - to send an e-mail. If you have not set up your e-mail account, you will be

prompted to do so.

Tip! Scroll to a

contact, and press to

mark it. You can mark

several recipients at a

time.

2 Press to select recipients or groups from Contacts, or enter the recipient’s phone

number or e-mail address. Press to add a semicolon (;) that separates the

recipients. You can also copy and paste the number or address from the Clipboard.

3 Press to move to the message field.

R0915_en.book Page 49 Tuesday, February 8, 2005 11:46 AM

Messaging

Options in the

message editor: Send,

Add recipient, Insert,

Attachments (e-mail),

Preview (MMS), Objects

(MMS), Remove (MMS),

Delete, Check contacts,

Message details,

Sending options, Help,

and Exit.

4 Write the message.

Note: Your device supports the sending of text messages beyond the normal

160-character limit. If your message exceeds 160 characters, it will be sent as a

series of two or more messages and sending may cost you more. In the

navigation bar, you can see the message length indicator counting backwards

from 160. For example, 10 (2) means that you can still add 10 characters for the

text to be sent as two messages. Some characters may take more space than

others.

• To add a media object to a multimedia message, select Options→ Insert object→

Image, Sound clip or Video clip. When sound is added, the icon is shown in the

navigation bar.

Tip! When you send a multimedia message to an e-mail address or a device

that supports the receiving of large images, use the larger image size. If you

are not sure of the receiving device, or the network does not support sending

large file, it is recommended that you use a smaller image size or a sound clip

that is no longer than 15 seconds. To change the setting, select Options→

Settings→ Multimedia message→ Image size in the Messaging main view.

If you select Insert new→ Sound clip, Recorder opens, and you can record a new

sound. Press Select, the new sound is automatically saved, and a copy is inserted in

the message. Select Options→ Preview to see what the multimedia message looks

like.

• To add an attachment to an e-mail, select Options→ Insert→ Image, Sound clip,

Video clip, Note, or Template. E-mail attachments are indicated by in the

navigation bar.

5 To send the message, select Options → Send, or press .

Note: E-mail messages are automatically placed in Outbox before sending. If

sending does not succeed, the e-mail is left in the Outbox with the status Failed.

Tip! In Messaging you can also create presentations and send them in a multimedia

message. In Multimedia message editor view, select Options→ Create presentation (shown

Fig. 10 Creating a

multimedia message.

R0915_en.book Page 50 Tuesday, February 8, 2005 11:46 AM

Messaging

only if MMS creation mode is set to Guided or Free). See Settings for multimedia messages,

p. ’58’

Receiving MMS and e-mail settings

You may receive the settings in a text message from your network operator or service

provider. See Receiving logos, tones, business cards, calendar entries, and settings

, p. ’52’.

Tip! To send files

other than sounds and

notes as attachments,

open the appropriate

application, and select

Send→ Via e-mail, if

available.

For availability of and subscription to data services, please contact your network operator

or service provider. Follow the instructions given by your service provider.

Entering the MMS settings manually:

1 Select Tools→ Settings→ Connection→ Access points and define the settings for a

multimedia messaging access point. See Connection settings

, p. ’97’.

2 Select Messaging→ Options→ Settings→ Multimedia message. Open Access point

in use and select the access point you created to be used as the preferred connection.

See also Settings for multimedia messages

, p. ’58’.

Before you can send, receive, retrieve, reply to, and forward e-mail, you must:

• Configure an Internet access point (IAP) correctly. See Connection settings

, p. ’97’.

Inbox icons:

- unread messages in

Inbox,

- unread text

message,

- unread multimedia

message, and

- data received

through Bluetooth.

• Define your e-mail settings correctly. See Settings for e-mail

, p. ’59’. You need to have

a separate e-mail account. Follow the instructions given by your remote mailbox and

Internet service provider (ISP).

Inbox - receiving messages

When you receive a message, and the text 1 new message are shown in the standby

mode. Press Show to open the message. To open a message in Inbox, scroll to it and press

R0915_en.book Page 51 Tuesday, February 8, 2005 11:46 AM

Messaging

Receiving multimedia messages

Important: Multimedia message objects may contain viruses or otherwise be

harmful to your device or PC. Do not open any attachment if you are not sure of the

trustworthiness of the sender.

When you open a multimedia message ( ), you may see an image and a message, and

simultaneously listen to a sound through the loudspeaker ( is shown if sound is

included). Click the arrow in the icon to listen to the sound.

To see what kinds of media objects have been included in the multimedia message, open

the message, and select Options→ Objects. You can choose to save a multimedia object

file in your phone or send it, for example, through Bluetooth to another compatible device.

You may also receive multimedia presentations. You can view these presentations by

selecting Options→ Play presentation.

being copied, modified, transferred, or forwarded.

Receiving logos, tones, business cards, calendar entries,

and settings

Tip! If you receive a

vCard file that has a

picture attached, the

picture is saved to

Contacts.

Your phone can receive many kinds of text messages that contain data ( ), also called

Over-The-Air (OTA) messages.

• Configuration message - You may receive a text message service number, voice mailbox

number, Internet access point settings, access point login script settings, or e-mail

settings from your network operator, service provider, or company information

management department in a configuration message. To save the settings, select

Options→ Save all.

• Business card - To save the information to Contacts, select Options→ Save business

card. Certificates or sound files attached to the business card are not saved.

R0915_en.book Page 52 Tuesday, February 8, 2005 11:46 AM

Messaging

• Ringing tone - To save the ringing tone, select Options→ Save.

• Operator logo - For the logo to be shown in the standby mode instead of the network

operator’s own identification, select Options→ Save.

Tip! To change the

default access point

settings for multimedia

messaging, select

Messaging→ Options→

Settings→ Multimedia

message→ Access point

in use.

• Calendar entry - To save the invitation, select Options→ Save to Calendar.

• Web message - To save the bookmark to the bookmarks list in Web, select Options→

Add to bookmarks. If the message contains both access point settings and bookmarks,

to save the data, select Options→ Save all.

• E-mail notification - Tells you how many new e-mails you have in your remote

mailbox. An extended notification may list more detailed information.

Receiving Web service messages

Web service messages ( ) are notifications (for example, news headlines) and may

contain a text message or a link. For availability and subscription, contact your service

provider.

My folders

Tip! You can use

texts in the Templates

folder to avoid rewriting

messages that you send

often.

In My folders, you can organise your messages into folders, create new folders, and rename

and delete folders.

Mailbox

If you select Mailbox and have not set up your e-mail account, you are prompted to do so.

See Settings for e-mail

, p. ’59’. When you create a new mailbox, the name you give to the

mailbox replaces Mailbox in the Messaging main view. You can have several mailboxes (up

to six).

R0915_en.book Page 53 Tuesday, February 8, 2005 11:46 AM

Messaging

Opening the mailbox

When you open the mailbox, you can choose whether you want to view the previously

retrieved e-mail messages and e-mail headings offline or connect to the e-mail server.

When you scroll to your mailbox and press , the phone asks you if you want to Connect

to mailbox?

• Select Yes to connect to your mailbox and retrieve new e-mail headings or messages.

When you view messages online, you are continuously connected to a remote mailbox

using a packet data connection. See also Essential indicators

, p. ’15’ and Connection

settings, p. ’97’.

• Select No to view previously retrieved e-mail messages offline. When you view e-mail

messages offline, your phone is not connected to the remote mailbox.

Retrieving e-mail messages

If you are offline, select Options→ Connect to start a connection to a remote mailbox.

Important: E-mail messages may contain viruses or otherwise be harmful to your

device or PC. Do not open any attachment if you are not sure of the trustworthiness

of the sender.

1 When you have an open connection to a remote mailbox, select Options→ Retrieve

e-mail:

• New - to retrieve all new e-mail messages to your phone.

• Selected - to retrieve only the e-mail messages that have been marked.

• All - to retrieve all messages from the mailbox.

To stop retrieving messages, press Cancel.

2 After you have retrieved the e-mail messages, you can continue viewing them online.

Or, select Options→ Disconnect to close the connection and view the e-mail messages

offline.

Fig. 11 Mailbox with

different status icons.

R0915_en.book Page 54 Tuesday, February 8, 2005 11:46 AM

Messaging

E-mail status icons:

- new e-mail (offline

or online mode), the

content has not been

retrieved to your phone.

- new e-mail, the

content has been

retrieved to your phone.

- e-mail message has

been read.

- e-mail heading that

has been read and the

message content has been

deleted from the phone.

3 To open an e-mail message, press . If the e-mail message has not been retrieved

(arrow in the icon is pointing outwards) and you are offline, you will be asked if you

want to retrieve this message from the mailbox.

To view e-mail attachments, open a message that has the attachment indicator , and

select Options→ Attachments. If the attachment has a dimmed indicator, it has not been

retrieved to the phone; select Options → Retrieve. In the Attachments view, you can

retrieve, open, save, or remove attachments. You can also send attachments using

Bluetooth.

Tip! If your mailbox uses the IMAP4 protocol, you can define how many messages to

retrieve, and whether to retrieve the attachments or not. With the POP3 protocol,

the options are e-mail headers only, partially (kB), or messages and attachments.

Deleting e-mail messages

• To delete the contents of an e-mail message from the phone while still retaining it in

the remote mailbox, select Options→ Delete. In Delete msg. from: select Phone only.

Note: The phone mirrors the e-mail headings in the remote mailbox. Although

you delete the message content, the e-mail heading stays in your phone. If you

want to remove the heading as well, you must first delete the e-mail message

from your remote mailbox, and then make a connection from your phone to the

remote mailbox again to update the status.

Tip! To copy an

e-mail from the remote

mailbox to a folder under

My folders, select

Options→ Copy to

folder. Select a folder

from the list, and press

OK.

• To delete an e-mail from both the phone as well as from the remote mailbox, select

Options→ Delete msg. from:→ Phone and server.

Note: If you are offline, the e-mail is deleted first from your phone. During the

next connection to the remote mailbox, it is automatically deleted from the

remote mailbox. If you are using the POP3 protocol, messages marked to be

deleted are removed only after you have closed the connection to the remote

mailbox.

R0915_en.book Page 55 Tuesday, February 8, 2005 11:46 AM

Messaging

• To cancel deleting an e-mail from both the phone and server, scroll to an e-mail that

has been marked to be deleted during the next connection ( ), and select Options→

Undelete.

Disconnecting from the mailbox

Tip! You can also

leave your mailbox

connection open and the

new e-mails (Headers

only as default) will be

retrieved from the remote

mailbox to your phone

automatically (only if

IMAP IDLE function is

supported by your server).

To leave the Messaging

application open in the

background, press

twice. Leaving the

connection open may

increase your call costs

due to the data traffic.

When you are online, select Options→ Disconnect to end the packet data connection to

the remote mailbox. See also Essential indicators

, p. ’15’.

Viewing e-mail messages when offline

When you open Mailbox the next time and you want to view and read the e-mail messages

offline, answer No to the Connect to mailbox? query. You can read the previously

retrieved e-mail headings or the retrieved e-mail messages or both. You can also write new,

reply to, or forward e-mail to be sent the next time you connect to the mailbox.

Outbox - messages waiting to be sent

Outbox is a temporary storage place for messages waiting to be sent.

Status of the messages in Outbox: Sending, Waiting /Queued

• Resend at %U (time) - The phone will try to send the message again after a time-out

period. Press Send to restart the sending immediately.

• Deferred - You can set documents to be ‘on hold’ while they are in Outbox. Scroll to a

message that is being sent and select Options→ Defer sending.

• Failed - The maximum number of sending attempts has been reached. Sending has

failed. If you were trying to send a text message, open the message and check that the

Sending options are correct.

Example: Messages are placed in Outbox, for example, when your phone is outside

network coverage. You can also schedule e-mail messages to be sent the next time you

connect to your remote mailbox.

R0915_en.book Page 56 Tuesday, February 8, 2005 11:46 AM

Messaging

Viewing messages on a SIM card

Before you can view SIM messages, you need to copy them to a folder in your phone.

1 In the Messaging main view, select Options→ SIM messages.

2 Select Options→ Mark/Unmark→ Mark or Mark all to mark messages.

3 Select Options→ Copy. A list of folders opens.

4 Select a folder and press OK to start copying. Open the folder to view the messages.

Messaging settings

Settings for text messages

Options when

editing text message

centre settings: Edit, New

msg. centre, Delete,

Help, and Exit.

Select Messaging→ Options→ Settings→ Text message.

• Message centres - Lists all the text message service centres that have been defined.

• Msg. centre in use - Select which message centre is used for delivering text messages.

• Receive report (network service) - To request the network to send delivery reports on

your messages. When set to No, only the Sent status is shown in Log. See Log

, p. ’25’.

• Message validity - If the recipient of a message cannot be reached within the validity

period, the message is removed from the text message service centre. The network must

support this feature. Maximum time is the maximum amount of time allowed by the

network.

• Message sent as - Change this option only if you are sure that your service centre is

able to convert text messages into these other formats. Contact your network operator.

• Preferred connection - You can send text messages through the normal GSM network

or through packet data, if supported by the network. See Connection settings, p. ’97’.

• Reply via same ctr. (network service) - Choose Yes, if you want the reply message to

be sent using the same text message service centre number.

Adding a new text message centre

1 Select Message centres→ Options→ New msg. centre.

R0915_en.book Page 57 Tuesday, February 8, 2005 11:46 AM

Messaging

2 Press , write a name for the service centre, and press OK.

3 Press and , and write the number of the text message service centre. You

receive the number from your service provider.

4 Press OK.

5 To use the new settings, go back to the settings view. Scroll to Msg. centre in use, and

select the new service centre.

Settings for multimedia messages

Select Messaging→ Options→ Settings→ Multimedia message.

• Image size - Define the size of the image in a multimedia message. The options are

Original (shown only when the MMS creation mode is set to Guided or Free), Small and

Large. Selecting Original will increase the size of the multimedia message.

• MMS creation mode - If you select Guided, the phone will inform you if you try to send

a message that may not be supported by the recipient. By selecting Restricted the phone

will prevent you from sending messages that are not supported.

• Access point in use (Must be defined) - Select which access point is used as the

preferred connection for the multimedia message centre.

Tip! You may also

obtain the multimedia

and e-mail settings from

your service provider

through an OTA message.

Contact your service

provider for more

information. See also

Receiving logos, tones,

business cards, calendar

entries, and settings, p.

’52’

• Recept. in home net.- Select whether you want the reception of the MMS messages in

the home network to be Automatic, Defer retrieval or Off. If you have selected Defer

retrieval the multimedia messaging centre will save the message. To retrieve the

message later, set to Automatic.

• Reception if roaming - Select how you want the MMS messages to be retrieved outside

the home network.

When you are outside your home network, sending and receiving multimedia messages

may cost you more. If Reception if roaming→ Automatic has been selected, your phone

can automatically make an active packet data connection to retrieve the message.

Select Off from Reception if roaming if you do not want to receive multimedia messages

when you are outside your home network.

R0915_en.book Page 58 Tuesday, February 8, 2005 11:46 AM

Messaging

• Allow anon. messages - Select No if you want to reject messages coming from an

anonymous sender.

• Receive adverts - Define whether you want to receive multimedia message

advertisements or not.

• Receive report (network service) - Set to Yes if you want the status of the sent message

to be shown in the Log.

Note: Receiving a delivery report of a multimedia message that has been sent

to an e-mail address might not be possible.

• Deny report sending - Choose Yes if you do not want your phone to send delivery

reports of received multimedia messages.

• Message validity - If the recipient of a message cannot be reached within the validity

period, the message is removed from the multimedia messaging centre. The network

must support this feature. Maximum time is the maximum amount of time allowed by

the network.

Settings for e-mail

Select Messaging→ Options→ Settings→ E-mail, or in the Mailbox main view, select

Options→ E-mail settings, and select:

Mailbox in use - Select which mailbox you want to use for sending e-mail.

Mailboxes - Opens a list of mailboxes that have been defined. If no mailboxes have been

defined, you will be prompted to do so. Select a mailbox to change the settings:

Mailbox settings

• Mailbox name - Enter a descriptive name for the mailbox.

• Access point in use (Must be defined) - Choose an Internet access point (IAP) for the

mailbox. See Connection settings

, p. ’97’.

• My e-mail address (Must be defined) - Enter the e-mail address given to you by your

service provider. Replies to your messages are sent to this address.

R0915_en.book Page 59 Tuesday, February 8, 2005 11:46 AM

Messaging

• Outgoing mail server (Must be defined) - Enter the IP address or host name of the

mail server that sends your e-mail. You may be able to use only the outgoing mail server

of your network operator. Contact your service provider/network operator for more

information.

• Send message - Define how e-mail is sent from your phone:

Immediately - The device starts to establish a connection to the mailbox after you have

selected Send message.

When conn. avail. - E-mail is sent when the connection to the remote mailbox is

available.

• User name - Enter your user name, given to you by your service provider.

• Password: - Enter your password. If you leave this field blank, you will be prompted for

the password when you try to connect to your remote mailbox.

• Incoming mail server (Must be defined) - Enter the IP address or host name of the

mail server that receives your e-mail.

• Mailbox type: - Defines the e-mail protocol that your remote mailbox service provider

recommends. The options are POP3 and IMAP4. This setting can be selected only once

and cannot be changed if you have saved or exited from the mailbox settings. If you are

using the POP3 protocol, e-mail messages are not updated automatically in online

mode. To see the latest e-mail messages, you must disconnect and make a new

connection to your mailbox.

• Security (ports) - Used with the POP3, IMAP4, and SMTP protocols to secure the

connection to the remote mailbox.

• APOP secure login (not shown if IMAP4 is selected for Mailbox type) - Used with the

POP3 protocol to encrypt the sending of passwords to the remote e-mail server while

connecting to the mailbox.

User settings

• E-mails to retrieve (not shown if the e-mail protocol is set to POP3) - Define how many

new e-mails will be retrieved to mailbox.

• Retrieve (not shown if the e-mail protocol is set to IMAP4) - Define which parts of the

e-mails will be retrieved: Headers only, Partially (kB), or Msgs. & attachs.

R0915_en.book Page 60 Tuesday, February 8, 2005 11:46 AM

Messaging

• Retrieve attachments (not shown if the e-mail protocol is set to POP3) - Choose

whether you want to retrieve e-mail with or without attachments.

• Subscribed folders (not shown if the e-mail protocol is set to POP3) - You can subscribe

other folders in remote mailbox as well and retrieve content from those folders.

• Send copy to self - Select Yes to save a copy of the e-mail to your remote mailbox and

to the address defined in My e-mail address.

• Include signature - Select Yes if you want to attach a signature to your e-mail

messages.

• My name - Enter your own name here. Your name will replace your e-mail address in

the recipient’s phone in case the recipient’s phone is supporting this function.

Automatic retrieval

• Header retrieval - When this function is on, you can define when and how often the

messages will be retrieved from the mailbox.

Activating Header retrieval may increase your call costs due to the data traffic.

Settings for Web service messages

Select Messaging→ Options→ Settings→ Service message. Choose whether or not you

want to receive service messages. Download messages - Choose Automatically if you

want to set the phone to automatically activate the browser and start a network

connection to retrieve content when the phone receives a service message.

Settings for cell broadcast (network service)

Check the available topics and related topic numbers with your service provider, and select

Messaging→ Options→ Settings→ Cell broadcast to change the settings.

• Language - All allows you to receive cell broadcast messages in all supported

languages. Selected allows you to choose in which languages you wish to receive cell

broadcast messages. If you cannot find the desired language, select Other.

R0915_en.book Page 61 Tuesday, February 8, 2005 11:46 AM

Messaging

• Topic detection - If you have set Topic detection→ On, the phone will automatically

search for new topic numbers, and save the new numbers without a name to the topic

list. Choose Off if you do not want to save new topic numbers automatically.

Other settings

Select Messaging and select Options→ Settings→ Other.

• Save sent messages - Choose if you want to save a copy of every text message,

multimedia message, or e-mail that you have sent to the Sent items folder.

Tip! If Memory card

is selected, activate the

Offline profile before

opening the memory card

slot door or removing the

memory card. When the

memory card is not

available, messages will

be saved in the phone

memory.

• No. of saved msgs. - Define how many sent messages will be saved to the Sent items

folder at a time. The default limit is 20 messages. When the limit is reached, the oldest

message is deleted.

• Memory in use - Choose to which memory you want to save your messages: Phone

memory or Memory card.

• New e-mail alerts - Choose whether you want to see the new e-mail indications, like

tone or a note, when new mail is received to the mailbox.

R0915_en.book Page 62 Tuesday, February 8, 2005 11:46 AM

Calendar and To-do

Shortcut: Press any

key ( - ) in

any calendar view. A

Meeting entry is opened,

and the characters you

keyed in are added to the

Subject field.

Calendar - creating calendar entries

1 Press and select Calendar.

2 Select Options→ New entry:

• Meeting to remind you of an appointment that has a specific date and time.

• Memo to write a general entry for a day.

• Anniversary to remind you of birthdays or special dates. Anniversary entries are

repeated every year.

Tip! If you are

editing or deleting a

repeated entry, choose

how you want the change

to take effect: All

occurrences - all repeated

entries are deleted / This

entry only - only the

current entry will be

deleted. For example, your

weekly class has been

cancelled. You have set

the calendar to remind

you every week. Select

This entry only and the

calendar will remind you

again next week.

3 Fill in the fields. Use to move between fields.

Alarm - Select On and press to fill in the Alarm time and Alarm date fields. Alarm

is shown with in the Day view. Stopping a calendar alarm - Press Silence to turn

off the calendar alarm tone. The reminder text will stay on the screen. Press Stop to end

the calendar alarm. Press Snooze to set the alarm to snooze.

Repeat - Press to change the entry to be repeating ( is shown in the Day view).

Repeat until - You can set an end date for the repeated entry.

Synchronisation - Private- after synchronisation the calendar entry can be seen only by

you and it will not be shown to others with online access to view the calendar. Public-

the calendar entry is shown to others who have access to view your calendar online.

None- the calendar entry will not be copied to your PC when you synchronise.

4 To save the entry, press Done.

Tip! You can send calendar entries to a compatible phone. See the Messaging

chapter, and Sending data using Bluetooth

, p. ’88’.

R0915_en.book Page 63 Tuesday, February 8, 2005 11:46 AM

Calendar and To-do

Calendar views

Tip! Select

Options→ Settings to

change the view that is

shown when you open the

calendar or the starting

day of the week.

Tip! To send a

calendar note, select

Options→ Send→ Via

text message/ Via

multimedia/ Via

Bluetooth.

In the Month view, dates that have calendar entries are marked with a small triangle at the

right bottom corner. In the Week view, memos and anniversaries are placed before 8

o’clock.

• Icons in Day and Week views: - Memo, and - Anniversary. There is no icon for

Meeting.

• To go to a certain date, select Options→ Go to date. Write the date, and press OK.

• Press to jump to today.

Tip! You can move

calendar and to-do data

from many different

Nokia phones to your

phone or synchronise

your calendar and to-do

to a compatible PC using

Nokia PC Suite. See the

CD-ROM supplied in the

sales package.

Setting a calendar alarm

You can set an alarm to remind you of a meeting. This option is not available for notes and

anniversaries.

1 Open a note in which you want to set an alarm, and select Alarm→ On.

2 Set the Alarm time and Alarm date.

3 Scroll down to Repeat, and press to select how often you want the alarm to be

repeated.

4 Press Done.

R0915_en.book Page 64 Tuesday, February 8, 2005 11:46 AM

Calendar and To-do

To delete a calendar alarm, open the note in which you want to delete an alarm, and select

Alarm→ Off.

Calendar settings

To modify the Calendar alarm tone, Default view, Week starts on, and Week view title, select

Options→ Settings.

To-do - task list

Press and select Organiser→ To-do to write notes and maintain a task list.

• To add a note, press any key to start to write the task in the Subject field.

• To set the due date for the task, scroll to the Due date field, and enter a date.

• To set the priority for the to-do note, scroll to the Priority field, and press to select

the priority. The priority icons are (High) and (Low). There is no icon for Normal.

• To mark a task as completed, scroll to it in the To-do list, and select Options→ Mark as

done.

• To restore a task, scroll to it in the To-do list, and select Options→ Mark as not done.

R0915_en.book Page 65 Tuesday, February 8, 2005 11:46 AM

Web

Various service providers maintain pages specifically designed for mobile devices. To

access these pages, press and select Web. These pages use the Wireless Markup

Language (WML), Extensible Hypertext Markup Language (XHTML), or Hypertext Markup

Language (HTML).

Check the availability of services, pricing, and tariffs with your network operator or service

provider. Service providers will also give you instructions on how to use their services.

Accessing the Web

• Save the settings that are needed to access the Web page that you want to use. See

the sections Receiving browser settings

or Keying in the settings manually.

• Make a connection to Web. See Making a connection

, p. ’68’.

• Start browsing the pages. See Browsing

, p. ’69’.

• End the connection to Web. See Ending a connection

, p. ’71’.

Receiving browser settings

Tip! Settings may be

available, for example, on

the Web site of a network

operator or service

provider.

You may receive Web service settings in a special text message from the network operator

or service provider that offers the Web page. See Receiving logos, tones, business cards,

calendar entries, and settings, p. ’52’. For more information, contact your network

operator or service provider.

Keying in the settings manually

Follow the instructions given to you by your service provider.

R0915_en.book Page 66 Tuesday, February 8, 2005 11:46 AM

Web

1 Select Tools→ Settings→ Connection→ Access points, and define the settings for an

access point. See Connection settings

, p. ’97’.

Options in the

Bookmarks view: Open,

Download, Back to page,

Bookmark manager,

Mark/Unmark,

Navigation options,

Advanced options, Send,

Find bookmark, Details,

Settings, Help and Exit.

2 Select Web→ Options→ Bookmark manager→ Add bookmark. Write a name for the

bookmark and the address of the page defined for the current access point.

Bookmarks view

Glossary: A bookmark consists of an Internet address (mandatory), bookmark title,

access point, and if the Web page requires, a user name and password.

Note: Your device may have some bookmarks loaded for sites not affiliated with

Nokia. Nokia does not warrant or endorse these sites. If you choose to access them,

you should take the same precautions, for security or content, as you would with

any Internet site.

The starting page defined for the default access point. If you use another default

access point for browsing, the starting page is changed accordingly.

The automatic bookmarks folder contains bookmarks ( ) that are collected

automatically when you browse pages. The bookmarks in this folder are automatically

organised according to domain.

Any bookmark showing the title or Internet address of the bookmark.

Shortcut: To start a

connection, press and hold

in standby mode.

Adding bookmarks manually

1 In the Bookmarks view, select Options→ Bookmark manager→ Add bookmark.

2 Start to fill in the fields. Only the URL address must be defined. The default access point

is assigned to the bookmark if no other one is selected. Press to enter special

characters such as /, ., :, and @. Press to clear characters.

3 Select Options→ Save to save the bookmark.

R0915_en.book Page 67 Tuesday, February 8, 2005 11:46 AM

Web

Sending bookmarks

Scroll to a bookmark, and select Options→ Send→ Via text message. Press to send.

It is possible to send more than one bookmark at the same time.

Making a connection

Tip! To send a

bookmark, scroll to it, and

select Options→ Send→

Via text message.

Once you have stored all the required connection settings, you can access the pages.

1 Select a bookmark or write the address in the Go to field ( ). When you write the

address, matching bookmarks are shown at the top of the Go to field. Press to

select a matching bookmark.

Options when

browsing (depend on the

page you are viewing):

Open, Accept, Remove

file, Open in viewer, Open

Wallet, Service options,

Bookmarks, Save as

bookmark, View images,

Navigation options,

Advanced options, Show

images, Send bookmark,

Find, Details, Settings,

Help, and Exit.

2 Press to start to download the page.

Connection security

If the security indicator is displayed during a connection, the data transmission

between the device and the internet gateway or server is encrypted.

The security icon does not indicate that the data transmission between the gateway and

the content server (or place where the requested resource is stored) is secure. The service

provider secures the data transmission between the gateway and the content server.

Select Options→ Details→ Security to view details about the connection, encryptions

status, and information about server and user authentication.

Security features may be required for some services, such as banking services. For such

connections you need security certificates. For more information, contact your service

provider. See also Certif. management

, p. ’103’.

R0915_en.book Page 68 Tuesday, February 8, 2005 11:46 AM

Web

Browsing

On a browser page, new links appear underlined in blue and previously visited links in

purple. Images that act as links have a blue border around them.

• To open a link, to check boxes, and make selections, press .

• To go to the previous page while browsing, press Back. If Back is not available, select

Options→ Navigation options→ History to view a chronological list of the pages you

have visited during a browsing session. The history list is cleared each time a session is

closed.

• To retrieve the latest content from the server, select Options→ Navigation options→

Reload.

• To save a bookmark, select Options→ Save as bookmark.

Tip! To access the

Bookmarks view while

browsing, press and hold

down . To return to the

browser view again, select

Options→ Back to page.

• To save a page while browsing, select Options→ Advanced options→ Save page. You

can save pages either to the phone memory or on a memory card, and browse them

when offline. To access the pages later, press in the Bookmarks view to open the

Saved pages view.

• To enter a new URL address, select Options→ Navigation options→ Go to web

address.

• To open a sublist of commands or actions for the currently open page, select Options→

Service options.

• You can download items such as ringing tones, images, operator logos, themes, and

video clips. Downloaded items are handled by the respective applications in your

phone, for example, a downloaded image is saved in Gallery.

Shortcut: Use

to jump to the end

of a page and to

the beginning of a page.

being copied, modified, transferred, or forwarded.

Important: Only install software from sources that offer adequate protection

against harmful software.

• To download and view new Web service messages while browsing, select Options→

Advanced options→ Read service msgs. (shown only if there are new messages). See

also Receiving Web service messages

, p. ’53’.

R0915_en.book Page 69 Tuesday, February 8, 2005 11:46 AM

Web

Viewing saved pages

If you regularly browse pages containing information which does not change very often,

you can save and browse them when offline. In the saved pages view you can also create

folders to store your saved browser pages.

Options in the

Saved pages view: Open,

Back to page, Reload,

Saved pages, Mark/

Unmark, Navigation

options, Advanced

options, Details, Settings,

Help, and Exit.

• To open the Saved pages view, press in the Bookmarks view. In the Saved pages

view, press to open a saved page ( ).

• To save a page, while browsing select Options→ Advanced options→ Save page.

• To start a connection to the browser service and to download the latest version of the

page, select Options→ Reload. The phone stays online after you reload the page.

Tip! Your browser

collects bookmarks

automatically while you

are browsing Web pages.

The bookmarks are stored

to the Automatic

bookmarks folder ( )

and automatically

organised according to

domain. See also Settings

for Web, p. ’71’.

Downloading and purchasing items

You can download items such as ringing tones, images, operator logos, themes, and video

clips. These items can be provided free, or you can purchase them. Downloaded items are

handled by the respective applications in your phone, for example, a downloaded photo

can be saved in Gallery.

Important: Only install applications from sources that offer adequate protection

against harmful software.

1 To download the item, scroll to the link, and press .

• If the item is provided free, press Accept. Once downloaded, the content is

automatically opened in a suitable application.

To cancel the download, press Cancel.

2 Choose the appropriate option to purchase the item, for example, ’Buy’.

3 Carefully read all the information provided.

If the online content is compatible, you can use your wallet information to make the

purchase.

R0915_en.book Page 70 Tuesday, February 8, 2005 11:46 AM

Web

4 Select Open Wallet. You will be prompted for your wallet code. See Creating a wallet

code, p. ’76’.

5 Select the appropriate card category from your wallet.

6 Select Fill in. This will upload the selected wallet information.

If the wallet does not contain all information necessary for the purchase, you will be

requested to enter the remaining details manually.

Note: Copyright protections may prevent some images, ringtones and other

content from being copied, modified, transferred, or forwarded.

Ending a connection

Select Options→ Advanced options→ Disconnect, or press and hold to quit browsing

and to return to the standby mode.

Emptying the cache

The information or services you have accessed are stored in the cache memory of the

phone.

Note: A cache is a memory location that is used to store data temporarily. If you

have tried to access or have accessed confidential information requiring passwords,

empty the cache after each use. The information or services you have accessed is

stored in the cache memory of the phone. To empty the cache, select Options→

Navigation options→ Clear cache.

Settings for Web

Select Options→ Settings:

• Default access point - To change the default access point, press to open a list of

available access points. See Connection settings

, p. ’97’.

R0915_en.book Page 71 Tuesday, February 8, 2005 11:46 AM

Web

• Show images - To select if you want to load images while browsing or not. If you

choose No, you can later load images during browsing by selecting Options→ Show

images.

• Font size - To choose the text size.

• Default encoding - If text characters are not shown correctly, you may choose another

encoding according to language.

• Automatic bookmarks - To disable automatic bookmark collecting, select Off. If you

want to continue collecting automatic bookmarks but hide the folder from the

Bookmarks view, select Hide folder.

• Screen size - To select what is shown when you are browsing. Select Select. keys only,

or Full screen.

• Search page - To define a Web page that will be downloaded when you select

Navigation options→ Open search page in the Bookmarks view, or when browsing.

• Volume - If you want the browser to play sounds embedded on Web pages, select a

volume level.

• Rendering - If you want the page layout shown as accurately as possible when in

Small screen mode, select By quality. If you do not want external cascading style

sheets to be downloaded, select By speed.

Glossary: Cookies

are a means of content

providers to identify users

and their preferences for

frequently used content.

• Cookies - To enable or disable the receiving and sending of cookies.

• Java/ECMA script - To enable or disable the use of scripts.

• Security warnings - To hide or show security notifications.

• Conf. DTMF sending - Choose whether you want to confirm before the phone sends

DTMF tones during a voice call. See also ‘DTMF tones’, p. ’25’

• Wallet - On to open the wallet automatically when a compatible browser page is

opened. See Wallet

, p. ’75’.

R0915_en.book Page 72 Tuesday, February 8, 2005 11:46 AM

Organiser

Calculator

To add, substract, multiply, divide, calculate square roots and percentages, press and

select Organiser→ Calculator.

Note: This calculator has limited accuracy and is designed for simple calculations.

To save a number in the memory (indicated by M), select Options→ Memory→ Save. To

retrieve a number in memory, select Options→ Memory→ Recall. To clear a number in

memory, select Options→ Memory→Clear.

Calculating percentages

1 Enter a number for which you want to calculate a percentage.

2 Select , , , or .

3 Enter the percentage.

4 Select .

Notes

Press and select Organiser→ Notes to write notes. You can send notes to other

compatible devices and plain text files (TXT format) that you receive can be saved to Notes.

R0915_en.book Page 73 Tuesday, February 8, 2005 11:46 AM

Organiser

Go to - adding shortcuts

Default shortcuts:

opens Calendar,

opens Inbox and

opens Notes.

To store shortcuts, links to your favourite images, notes, bookmarks, and so on, press

and select Organiser→ Go to. Shortcuts can be added only from the individual applications,

like Gallery. Not all applications have this function.

1 Select an item from an application to which you want to add a shortcut.

2 Select Add to 'Go to'. A shortcut in Go to is automatically updated if you move the item

to which it is pointing, for example, from one folder to another.

• To change the identifier in the lower left corner of the shortcut icon, select Options→

Shortcut icon.

Deleting a shortcut

Select the shortcut and press . The default shortcuts Notes, Calendar, and Inbox cannot

be deleted.

When you remove an application or a document which has a shortcut in the Go to, the

shortcut icon of the removed item will be dimmed in the Go to view. The shortcut can be

deleted next time you try to open the shortcut.

Converter - converting measures

Options in Converter:

Select unit/ Change

currency, Conversion

type, Currency rates,

Help, and Exit.

To convert measures such as Length from one unit (Yards) to another (Metres), press

and select Organiser→ Converter.

Note that the Converter has limited accuracy, and rounding errors may occur.

1 Scroll to the Type field, and press to open a list of measures. Scroll to the measure

you want to use, and press OK.

R0915_en.book Page 74 Tuesday, February 8, 2005 11:46 AM

Organiser

2 Scroll to the first Unit field, and press . Select the unit from which you want to

convert, and press OK. Scroll to the next Unit field, and select the unit to which you

want to convert.

3 Scroll to the first Amount field, and enter the value you want to convert. The other

Amount field changes automatically to show the converted value.

Press to add a decimal and for the +, - (for temperature), and E

(exponent) symbols.

Setting a base currency and exchange rates

Tip! To change the

conversion order, enter

the value in the second

Amount field. The result

is shown in the first

Amount field.

Before you can make currency conversions, you need to choose a base currency and add

exchange rates. The rate of the base currency is always 1. The base currency determines

the conversion rates of the other currencies.

1 Select Converter→ Options→ Currency rates. A list of currencies opens, and you can see

the current base currency at the top.

2 To change the base currency, scroll to the currency, and select Options→ Set as base

curr..

Tip! To rename a

currency, go to the

Currency rates view, scroll

to the currency, and select

Options→ Rename

currency.

Note: When you change base currency, you must key in the new rates because all

previously set exchange rates are set to zero.

3 Add exchange rates. Scroll to the currency, and key in a new rate, that is, how many

units of the currency equal one unit of the base currency you have selected.

After you have inserted all the necessary exchange rates, you can make currency

conversions.

Wallet

Press and select Organiser→ Wallet. Wallet provides you with a storage area for your

personal information, such as credit and debit card numbers, addresses and other useful

data, for example, user names and passwords.

R0915_en.book Page 75 Tuesday, February 8, 2005 11:46 AM

Organiser

The information stored in the wallet can be retrieved while browsing to automatically fill

in online forms on browser pages, for example, when the service asks for credit card details.

Data in the wallet is encrypted and protected with a wallet code that you define.

Wallet will automatically close after 5 minutes. Enter the wallet code to regain access to

the contents. You can change this automatic time-out period if required. See Wallet

settings, p. ’78’.

Options in the

wallet main view: Open,

Settings, Help, and Exit.

Creating a wallet code

Each time you open the wallet you will be prompted for a wallet code. Enter the code that

you have created, and press OK.

When you open the wallet for the first time, you must create your own wallet code:

1 Enter a code of your choice (4-10 alphanumeric characters), and press OK.

2 You will be prompted to verify the code. Enter the same code, and press OK. Do not give

your wallet code to anyone else.

If you enter the wallet code incorrectly on three consecutive occasions, the wallet

application is blocked for five minutes. The block time increases if further incorrect wallet

codes are entered.

If you forget your wallet code, you will have to reset the code, and you will lose all

information stored in the wallet. Resetting the wallet and wallet code

, p. ’78’.

Storing personal card details

1 Select the Cards category from the main wallet menu, and press .

2 Select a type of card from the list, and press .

• Payment cards - Credit and debit cards.

• Loyalty cards - Membership and store cards.

• Online acc. cards - Personal user names and passwords to online services.

• Address cards - Basic contact details for home/office.

R0915_en.book Page 76 Tuesday, February 8, 2005 11:46 AM

Organiser

• User info cards - Customised personal preferences for online services.

3 Select Options→ New card. An empty form opens.

4 Fill in the fields, and press Done.

You can also receive card information directly to the phone from a card issuer or service

provider (if they offer this service). You will be notified which category the card belongs to.

Save or discard the card. You can view and rename a saved card, but you cannot edit it.

You can open, edit, or delete the fields in the card. Any changes will be saved upon exiting.

Creating personal notes

Personal notes are a means of storing sensitive information, for example, a bank account

number. You can access the data in a personal note from the browser. You can also send

the note as a message.

1 Select the Personal notes category from the main wallet menu, and press .

2 Select Options→ New card. An empty note opens.

3 Press - to start writing. Press to clear characters.

4 Press Done to save.

Creating a wallet profile

Once you have stored your personal details, you can combine them together into a wallet

profile. You can use a wallet profile to retrieve wallet data from different cards and

categories to the browser. For example, when you are filling in a form.

1 Select the Wallet profiles category from the main wallet menu, and press .

2 Select Options→ New profile. A new wallet profile form opens.

3 Fill in the fields or select an option from the listed items.

R0915_en.book Page 77 Tuesday, February 8, 2005 11:46 AM

Organiser

Example: By uploading

your payment card details

you do not need to enter

the card number and

expiry date each time you

need them (depending on

the content being

browsed). Also, you can

retrieve your user name

and password stored as

an access card when

connecting to a mobile

service that requires

authentication.

• Profile name - Choose and enter a name for the profile.

• Payment card, Loyalty card, Online access card, Shipping address,

• Billing address - By default this is the same as the Shipping address. If you require a

different address, select one from the Address card category.

• User info card,

• Receive e-receipt - Select a destination from the Address card category.

• Deliver e-receipt and

• RFID sending - Set to On or Off. Defines whether or not your unique phone

identification is sent with the wallet profile.

4 Press Done.

Viewing ticket details

You can receive notifications of tickets purchased online through the browser. Received

notifications are stored in the wallet. To view the notifications:

1 Select the Tickets category from the main wallet menu, and press .

2 Select Options→ View. None of the fields within the notification can be modified.

Wallet settings

From the main wallet menu, select Options→ Settings:

• Wallet code - Change your wallet code. You will be prompted to enter the current code,

create a new code, and verify the new code.

• RFID - Set the phone ID code, type, and sending options.

• Automatic close - Change the automatic time-out period (1-60 minutes). After the

time-out period has elapsed, the wallet code must be re-entered to gain access to the

contents.

Resetting the wallet and wallet code

This operation erases all contents of the wallet.

R0915_en.book Page 78 Tuesday, February 8, 2005 11:46 AM

Organiser

To reset both the contents of the wallet and the wallet code:

1 Enter *#7370925538# in the standby mode.

2 Enter the phone lock code, and press OK. See Security

, p. ’101’.

When opening the wallet again, you must enter a new wallet code. Creating a wallet code

p. ’76’

R0915_en.book Page 79 Tuesday, February 8, 2005 11:46 AM

IM - Instant Messaging (chat)

IM - Instant Messaging

(chat)

Press and select Tools→ IM.

Instant messaging is a network service which allows you to converse with other people

using instant messages and join discussion forums (IM groups) with specific topics.

Various service providers maintain IM servers that you can log in to once you have

registered to an IM service.

Options in the IM

main view: Open, Login/

Logout, Settings, Help,

Exit.

Note: Check the availability of chat services, pricing, and tariffs with your network

operator and/or service provider. Service providers will also give you instructions on

how to use their services.

Receiving IM settings

Tip: To log in

automatically when you

start IM, without having

to enter your user ID and

password each time, select

Options→ Settings→

Server settings→ IM login

type→ Automatic.

You must save the settings to access the service that you want to use. You may receive

the settings in a special text message, a so-called smart message, from the network

operator or service provider that offers the IM service. See Receiving logos, tones, business

cards, calendar entries, and settings, p. ’52’. You can also enter the settings manually. See

Chat server settings

, p. ’86’.

Connecting to an IM server

1 Open IM to have your phone connect to the IM server in use. To change the IM server

in use and save new IM servers, see Chat server settings

, ’86’. Once the connection has

been established:

R0915_en.book Page 80 Tuesday, February 8, 2005 11:46 AM

IM - Instant Messaging (chat)

2 Enter your user ID and password, and press to log in. You obtain the user ID and

password for IM server from your service provider.

You can select Cancel to stay offline; to log in to the IM server later, select Options→

3 To log out, select Options→ Logout.

Modifying your IM settings

Select Options→ Settings→ IM settings:

Options in the

Conversations list: Open,

Delete, Add to IM

contacts, New

conversation, Set auto

reply on, Blocking

options, End

conversation, Login,

Settings, Help, Exit.

• Use screen name (shown only if IM groups supported by the server) - To enter a

nickname (up to10 characters), select Yes.

• IM presence - To allow others to see if you are online, select Active for all.

• Allow messages from - To allow messages from all, select All.

• Allow invitations from - To allow invitations only from your IM contacts, select IM

contacts only. IM invitations are sent by IM contacts who want you to join their groups.

• Msg. scrolling speed - To select the speed at which new messages are displayed.

• Sort IM contacts - To sort your IM contacts Alphabetically or By online status.

• Availability reloading - To choose how to update information about whether your IM

contacts are online or offline, select Automatic or Manual.

Searching for IM groups and users

• To search for groups, in the IM groups view, select Options→ Search. You can search

by Group name, Topic, and Members (user ID).

• To search for users, in the IM contacts view, select Options→ Search. You can search

by User's name, User ID, Phone number, and E-mail address.

R0915_en.book Page 81 Tuesday, February 8, 2005 11:46 AM

IM - Instant Messaging (chat)

Joining and leaving an IM group

• To join a IM group that you have saved, scroll to the group, and press .

• To join an IM group not on the list, but for which you know the group ID, select

Options→ Join new group. Enter the group ID, and press .

• To leave the IM group, select Options→ Leave IM group.

Chatting

Once you have joined an IM group, you can view the messages that are exchanged there,

and send your own messages.

Options while

chatting: Send, Send

private msg., Reply,

Forward, Insert smiley,

Send invitation, Leave IM

group, Add to banned list,

Group, Record convers./

Stop recording, Help, and

Exit.

• To send a message, write the message in the message editor field, and press .

• To send a private message to participant, select Options→ Send private msg., select

the recipient, write the message, and press .

To reply to a private message sent to you, select the message and select Options→

Reply.

• To invite IM contacts who are online to join the IM group, select Options→ Send

invitation, select the contacts you want to invite, write the invitation message, and

press .

• To prevent receiving messages from certain participants, select Options→ Blocking

options and select:

• Add to blocked list - to block messages from the currently selected participant.

• Add ID to list manually - to enter the user ID of the participant. Enter the ID and

press .

• View blocked list - to see the participants whose messages are being blocked.

• Unblock - to select the user that you want to remove from the blocked list. Press

R0915_en.book Page 82 Tuesday, February 8, 2005 11:46 AM

IM - Instant Messaging (chat)

Recording chats

Options in the

Recorded chats view:

Open, Delete, Send, Mark/

Unmark, Login/ Logout,

Settings, Help, Exit.

• To record to a file the messages that are exchanged during a conversation or while you

are joined in a IM group, select Options→ Record convers., enter a name for the

conversation file, and press . To stop recording, select Options→ Stop recording.

The recorded conversation files are automatically saved in the Recorded chats.

• To view the recorded chats, in the main view, select Recorded chats, select the

conversation and press .

Viewing and starting conversations

Options when

viewing a conversation:

Send, Add to IM

contacts, Insert smiley,

Forward, Record convers./

Stop recording, Blocking

options, End

conversation, Help, Exit

Go to the Conversations view to see a list of the individual conversation participants that

you have an ongoing conversation with.

To view a conversation, scroll to a participant, and press .

• To continue the conversation, write your message and press .

• To return to the conversations list without closing the conversation, press Back.

• To close the conversation, select Options→ End conversation. Ongoing

conversations are automatically closed when you exit Chat.

To start a new conversation, select Options→ New conversation:

• Select recipient - To see a list of your chat contacts that are currently online. Scroll

to the contact that you want to start a conversation with, and press .

Glossary: The user ID

is provided by the service

provider to those who

• Enter user ID - To enter the user ID of the user you want to start a conversation

with, and press .

To save a conversation participant to your IM contacts, scroll to the participant and select

Options→ Add to IM contacts.

To send automatic replies to incoming messages, select Options→ Set auto reply on.

Enter the text and press Done. You can still receive messages.

R0915_en.book Page 83 Tuesday, February 8, 2005 11:46 AM

IM - Instant Messaging (chat)

IM contacts

Go to the IM contacts to retrieve chat contact lists from the server, or to add a new chat

contact to a contact list. When you log in to the server, the previously used chat contact

list will be retrieved from the server automatically.

• To create a new contact, select Options→ New IM contact→ Enter manually. Fill in

the Nickname and User ID fields, and press Done.

• To move a contact from a list on the server to the retrieved list, select Options→

New IM contact→ Move from other list.

Options in the IM

contacts view: Open

conversation, Open,

Change contact list, Reload

user availab., Belongs to

groups, New IM contact,

Move to other list, Edit,

Delete, Switch tracking

on, Blocking options,

Help, and Exit.

• To change the chat contact list, select Options→ Change contact list.

• Select Options:

• Open conversation - To start a new conversation or continue an ongoing

conversation with the contact.

• Switch tracking on - To have the phone notify you every time the chat contact goes

online or offline.

• Belongs to groups - To see which groups the chat contact has joined.

• Reload user availab. - To update information about whether the contact is online

or offline. The online status is shown by an indicator next to the contact name. This

option is not available if you have set the Availability reloading to Automatic in

IM settings.

Managing IM groups

Options in the IM

groups view: Open, Join

new group, Create new

group, Leave IM group,

Group, Search, Login/

Logout, Settings, Help,

and Exit.

Go to the IM groups view to see a list of the IM groups that you have either saved or are

currently joined to.

Scroll to a group, and select Options→ Group:

• Save - To save an unsaved group that you are currently joined to.

• View participants - To see who are currently joined to the group.

R0915_en.book Page 84 Tuesday, February 8, 2005 11:46 AM

IM - Instant Messaging (chat)

• Details - To see the group ID, topic, participants, administrators of the group (shown

only if you have the editing rights), the list of banned participants (shown only if you

have the editing rights), and whether whispering is allowed in the group.

• Settings - To view and edit the chat group settings. See Creating a new IM group, p

’85’

Administrating an IM group

Creating a new IM group

Select IM groups→ Options→ Create new group. Enter the settings for the group.

You can edit the settings for an IM group if you have administrator rights to the group.

The user who creates a group is automatically given administrator rights to it.

• Group name -, Group topic -,

• Welcome note - To add a note that the participants see when they join the group,

• Group size - To define the maximum number of members allowed to join the group,

• Allow search - ,

• Editing rights - To define the chat group participants to whom you want to give

administration rights permission to invite contacts to join the IM group and edit the

group settings.

• Group members - See Adding and removing group members

, p. ’85’.

• Banned list - Enter the participants that are not allowed to join the IM group.

• Allow private msgs. - To allow messaging between selected participants only.

• Group ID - The group ID is created automatically and cannot be changed.

Adding and removing group members

• To add members to a group, select IM groups, scroll to an IM group, and select

Options→ Group→ Settings→ Group members→ Selected only or All.

R0915_en.book Page 85 Tuesday, February 8, 2005 11:46 AM

IM - Instant Messaging (chat)

• To remove a member from the IM group, scroll to the member, and select Options→

Remove. To remove all members, select Options→ Remove all.

Chat server settings

Select Options→ Settings→ Server settings. You may receive the settings in a special

text message from the network operator or service provider that offers the chat service.

You obtain the user ID and password from your service provider, when you register to the

service. If you do not know your user ID or password, contact your service provider.

• To change the IM server to which you wish to connect, select Default server.

• To add a new server to your list of IM servers, select Servers→ Options→ New server.

Enter the following settings:

• Server name - Enter the name for the chat server.

• Access point in use - Select the access point you want to use for the server.

• Web address - Enter the URL address of the IM server.

• User ID - Enter your user ID.

• Password - Enter your login password.

R0915_en.book Page 86 Tuesday, February 8, 2005 11:46 AM

Connectivity

Bluetooth connection

Bluetooth enables wireless connections to send images, video clips, music and sound clips

and notes, or to connect wirelessly to Bluetooth enabled, compatible devices such as

computers. Since Bluetooth devices communicate using radio waves, your phone and the

other Bluetooth device do not need to be in direct line-of-sight. The two devices only need

to be within a maximum of 10 metres of each other, although the connection can be

subject to interference from obstructions such as walls or from other electronic devices.

This device is compliant with Bluetooth Specification 1.1 supporting the following profiles:

Generic Access Profile, Serial Port Profile, Dial-up Networking Profile, Headset Profile,

Handsfree Profile, Generic Object Exchange Profile, Object Push Profile, File Transfer

Profile, and Basic Imaging Profile. To ensure interoperability between other devices

supporting Bluetooth technology, use Nokia approved enhancements for this model. Check

with the manufacturers of other devices to determine their compatibility with this device.

There may be restrictions on using Bluetooth technology in some locations. Check with

your local authorities or service provider.

Features that use Bluetooth technology, or allow such features to run in the background

while using other features, increase the demand on battery power and reduces the battery

life.

Press and select Connect.→ Bluetooth. You are asked to give a Bluetooth name to your

phone.

Bluetooth settings

• Bluetooth - On/Off

R0915_en.book Page 87 Tuesday, February 8, 2005 11:46 AM

Connectivity

• My phone's visibility - Shown to all: your phone can be found by other Bluetooth

devices, or Hidden: your phone cannot be found by other devices.

Icons for different

Bluetooth devices:

- Computer

- Phone

- Audio/video

- Headset

- Other

• My phone's name - Define a Bluetooth name for your phone. After you have set

Bluetooth to be active and changed My phone's visibility to Shown to all, your phone

and this name can be seen by other Bluetooth device users.

Sending data using Bluetooth

There can be only one active Bluetooth connection at a time.

1 Open an application where the item you wish to send is stored. For example, to send an

image to another compatible device, open the Gallery application.

2 Select the item, for example an image, and select Options→ Send→ Via Bluetooth.

Tip! When

searching for devices,

some Bluetooth devices

may show only the unique

Bluetooth addresses

(device addresses). To find

the unique Bluetooth

address of your phone,

enter the code *#2820#

in the standby mode.

The phone starts to search for devices within range. Bluetooth enabled devices that are

within range start to appear on the display one by one. You can see a device icon, the

Bluetooth name of the device, the device type, or a short name.

Tip! If you have searched for Bluetooth devices earlier, a list of the devices that

were found previously is shown first. To start a new search, select More devices.

If you switch off the phone, the list is cleared.

• To interrupt the search, press Stop. The device list freezes and you can start to form

a connection to one of the devices already found.

3 Scroll to the device with which you want to connect, and press Select.

4 Pairing (if required by the other device)

Glossary: Pairing means authentication. The users of the Bluetooth enabled devices

should agree what the passcode is and use the same passcode for both devices in order

to pair them. Devices that do not have a user interface have a factory-set passcode.

• If the other device requires pairing before data can be transmitted, a tone sounds and

you are asked to enter a passcode.

• Create your own passcode (1-16 characters long, numeric) and agree with the owner

of the other Bluetooth device to use the same code. The passcode is used only once.

R0915_en.book Page 88 Tuesday, February 8, 2005 11:46 AM

Connectivity

Tip! To send text

using Bluetooth (instead

of text messages), go to

Notes, write the text, and

select Options→ Send→

via Bluetooth.

• After pairing, the device is saved to the Paired devices view.

When the connection has been established, the note Sending data is shown.

The Drafts folder in Messaging does not store messages sent using Bluetooth.

Checking the status of the Bluetooth connection

• When is shown in the standby mode, Bluetooth is active.

• When is blinking, your phone is trying to connect to the other device.

• When is shown continuously, the Bluetooth connection is active.

Pairing devices

Tip! To define a

short name (nickname or

alias), scroll to the device

and select Options→

Assign short name in the

Paired devices view. This

name helps you to

recognise a certain device

during device search or

when a device requests a

connection.

Paired devices are easier to recognise, they are indicated by in the device search. In the

Bluetooth main view, press to open the Paired devices view ( ).

• To pair with a device, select Options→ New paired device. The phone starts a device

search. Scroll to the device, and press Select. Exchange passcodes, see step 4 (Pairing),

p. ’88’

• To cancel a pairing, scroll to the device, and select Options→ Delete. If you want to

cancel all pairings, select Options→ Delete all.

Tip! If you are currently connected to a device and delete the pairing with that

device, pairing is removed immediately, but the connection remains active.

• To set a device to be authorised or unauthorised, scroll to a device, and select Options:

Set as authorised - Connections between your phone and this device can be made

without your knowledge. No separate acceptance or authorisation is needed. Use this

status for your own devices, such as your compatible Bluetooth headset or PC, or

devices that belong to someone you trust. The icon is added next to authorised

devices in the Paired devices view.

Set as unauthorised - Connection requests from this device need to be accepted

separately every time.

R0915_en.book Page 89 Tuesday, February 8, 2005 11:46 AM

Connectivity

Receiving data using Bluetooth

When you receive data using Bluetooth, a tone sounds, and you are asked if you want to

accept the Bluetooth message. If you accept, is shown, and the item is placed in the

Inbox folder in Messaging. Bluetooth messages are indicated by . See Inbox - receiving

messages, p. ’51’.

Switching off Bluetooth

To switch off Bluetooth, select Bluetooth→ Off.

PC connections - using Bluetooth or USB

You can use your phone with a variety of PC connectivity and data communications

applications. With Nokia PC Suite you can, for example, synchronise contacts, calendar and

To-do notes between your phone and a compatible PC. For further information on how to

install Nokia PC Suite (compatible with Windows 2000 and Windows XP), see the User’s

Guide for Nokia PC Suite and the Nokia PC Suite help in the ‘Install’ section on the CD-

ROM.

Using the CD-ROM

The CD-ROM should launch after you have inserted it into the CD-ROM drive of a

compatible PC. If not, proceed as follows: Open Windows Explorer, right-click the CD-ROM

drive where you inserted the CD- ROM, and select AutoPlay.

Using your phone as a modem

You can use your phone as a modem to send and receive e-mails, or to connect to the

Internet with a compatible PC by using a Bluetooth connection, or a data cable. Detailed

R0915_en.book Page 90 Tuesday, February 8, 2005 11:46 AM

Connectivity

installation instructions can be found in the User’s Guide for Nokia PC Suite in Modem

options on the CD-ROM.

Connection manager

You may have multiple data connections active at the same time when you are using your

phone in GSM and UMTS networks. Press and select Connect.→ Conn. mgr. to view

the status of multiple data connections, view details on the amount of data sent and

received, and end connections. When you open Connection manager, you can see a list of:

Options in the

Connection manager

main view when there are

one or more connections:

Details, Disconnect,

Disconnect all, Help and

Exit.

• open data connections: data calls ( ), and packet data connections ( )

• the status of each connection

• the amount of data uploaded and downloaded for each connection (shown for packet

data connections only)

• the duration of each connection (shown for data calls only).

Note: The actual time invoiced for calls by your service provider may vary,

depending on network features, rounding off for billing, and so forth.

• To end a connection, scroll to a connection, and select Options→ Disconnect.

• To close all currently open connections, select Options→ Disconnect all.

Viewing data connection details

To view the details of a connection, scroll to a connection, and select Options→ Details.

• Name - The name of the Internet access point (IAP) in use, or ’Modem connection’ if

the connection is a dial-up connection.

• Bearer - The type of data connection: Data call, High sp. GSM, or Packet data.

• Status - The current status of the connection: Connecting, Conn.(inact.), Conn.(active),

On hold, Disconnctng., or Disconnected.

• Received - The amount of data, in bytes, received to the phone.

• Sent - The amount of data, in bytes, sent from the phone.

R0915_en.book Page 91 Tuesday, February 8, 2005 11:46 AM

Connectivity

• Duration - The length of time that the connection has been open.

• Speed - The current speed of both sending and receiving data in %U kB/s (kilobytes per

second).

• Name - Access point name used or Dial-up - the dial-up number used.

• Shared (not shown if the connection is not shared) - The number of applications using

the same connection.

Sync - remote synchronisation

Press and select Connect.→ Sync. The Sync application enables you to synchronise your

calendar, and contacts with various calendar and address book applications on a

compatible computer or on the Internet.

The synchronisation application uses SyncML technology for synchronisation. For

information on SyncML compatibility, please contact the supplier of the calendar or

address book application you want to synchronise your phone data with.

You may receive Sync settings in a special text message. See Receiving logos, tones,

business cards, calendar entries, and settings, p. ’52’.

Creating a new synchronisation profile

Options in the

Remote sync main view:

Synchronise, New sync

profile, Edit sync profile,

Delete, View log, Set as

default, Help, and Exit.

1 If no profiles have been defined, the phone asks if you want to create a new profile.

Select Yes.

To create a new profile in addition to existing ones, select Options→ New sync profile.

Choose whether you want to use the default setting values or copy the values from an

existing profile to be used as the basis for the new profile.

2 Define the following:

Sync profile name - Write a descriptive name for the profile.

Data bearer - Select the connection type: Web or Bluetooth.

Access point - Select an access point you want to use for the data connection.

R0915_en.book Page 92 Tuesday, February 8, 2005 11:46 AM

Connectivity

Host address - Contact your service provider or system administrator for the correct

values.

Port - Contact your service provider or system administrator for the correct values.

User name - Your user ID for the synchronisation server. Contact your service provider

or system administrator for your correct ID.

Password - Write your password. Contact your service provider or system administrator

for the correct value.

Allow sync requests - Select Yes if you want to allow the server to start a

synchronisation.

Accept all sync reqs. - Select No if you want the phone to ask you before a

synchronisation initialised by the server is started.

Network authentic. (shown only if Data bearer is set to Web) - Select Yes to enter a

network user name and password. Press to view the user name and password fields.

Press to select: Contacts, Calendar, or Notes.

• Select Yes if you want to synchronise the selected database.

• Remote database - Select the synchronisation type Normal (two-way

synchronisation), To server only, or To phone only.

• Enter a correct path to the remote calendar, address book, or notes database on the

server.

3 Press Back to save the settings and return to the main view.

Synchronising data

In the Sync main view, you can see the different synchronisation profiles, and the kind of

data to be synchronised.

1 Select a synchronisation profile and Options→ Synchronise. The status of the

synchronisation is shown at the bottom of the screen.

To cancel synchronisation before it is finished, press Cancel.

R0915_en.book Page 93 Tuesday, February 8, 2005 11:46 AM

Connectivity

2 You are notified when the synchronisation is complete. After synchronisation is

complete, select Options→ View log to open a log file showing the synchronisation

status (Complete or Incomplete) and how many calendar or contact entries have been

added, updated, deleted, or discarded (not synchronised) in the phone or on the server.

R0915_en.book Page 94 Tuesday, February 8, 2005 11:46 AM

Tools

Settings

To change settings, press and select Tools→ Settings. Scroll to a setting group, and

press to open it. Scroll to a setting you want to change, and press .

Phone settings

General

Phone language - Changing the language of the display texts in your phone will also affect

the format used for date and time and the separators used, for example, in calculations.

Automatic selects the language according to the information on your SIM card. After you

have changed the display text language, the phone restarts.

Changing the settings for Phone language or Writing language affects every application

in your phone and the change remains effective until you change these settings again.

Writing language - Changing the language affects the characters and special characters

available when writing text and the predictive text dictionary used.

Dictionary - You can set the predictive text input On or Off for all editors in the phone.

The predictive text dictionary is not available for all languages.

Welcome note or logo - The welcome note or logo is displayed briefly each time you

switch on the phone. Select Default to use the default image, Text to write a welcome note

(up to 50 letters), or Image to select a photo or picture from Gallery.

Orig. phone settings - You can reset some of the settings to their original values. To do

this, you need the lock code. See Security

, Phone and SIM, p. ’101’. After resetting the

Fig. 12 Adjusting the

display brightness.

R0915_en.book Page 95 Tuesday, February 8, 2005 11:46 AM

Tools

settings, the phone may take a longer time to power on. Documents and files are

unaffected.

Standby mode

You can assign keypad shortcuts for the different keypresses in the standby mode:

is the Left selection key, pressing is the same as Navigation key right, and is the

same as Selection key. You cannot have a shortcut to an application that you have

installed.

Operator logo - This setting is visible only if you have received and saved an operator logo.

You can choose if you want the operator logo to show or not.

Display

Brightness - You can change the brightness of the display to lighter or darker. The

brighness of the display is automatically adjusted according to the environment.

Screen saver timeout - The screen saver is activated when the timeout period is over.

Light time-out - Select a timeout after which the backlight will be switched off.

Call settings

Send my caller ID (network service) - You can set your phone number to be displayed to

(Yes) or hidden from (No) the person to whom you are calling; or the value may be set by

your network operator or service provider when you make a subscription (Set by network).

Call waiting (network service) - If you have activated call waiting, the network will notify

you of a new incoming call while you have a call in progress. Select Activate to request

the network to activate call waiting, Cancel to request the network to deactivate call

waiting, or Check status to check if the function is active or not.

Reject call with SMS - Select Yes to send a text message to a caller informing why you

could not answer the call. See Answering or rejecting a call

, p. ’23’.

Fig. 13 The screen saver

changes to show the

number of new

messages or missed

calls.

R0915_en.book Page 96 Tuesday, February 8, 2005 11:46 AM

Tools

Message text - Write a text to be sent in a text message when you reject a call.

Image in video call - You can deny video sending when you receive a video call. Select a

still image to be displayed instead of video.

Tip! To change the

settings for call diverting,

press and select

Tools→ Settings→ Call

divert. See Call diverting

p. ’104’

Automatic redial - Select On, and your phone will make a maximum of ten attempts to

connect the call after an unsuccessful call attempt. Press to stop automatic redialling.

Summary after call - Activate this setting if you want the phone to briefly display the

approximate duration of the last call.

Speed dialling - Select On, and the numbers assigned to the speed dialling keys ( -

) can be dialled by pressing and holding the key. See also Speed dialling a phone

number, p. ’22’.

Anykey answer - Select On, and you can answer an incoming call by briefly pressing any

key, except , , , and .

Tip! To switch

between the phone lines,

press and hold in

standby mode.

Line in use (network service) - This setting is shown only if the SIM card supports two

subscriber numbers, that is, two phone lines. Select which phone line you want to use for

making calls and sending text messages. Calls on both lines can be answered irrespective

of the selected line. If you select Line 2 and have not subscribed to this network service,

you will not be able to make calls. When line 2 is selected, is shown in the standby

mode.

Line change (network service) - To prevent line selection, select Line change→ Disable if

supported by your SIM card. To change this setting, you need the PIN2 code.

Connection settings

Data connections and access points

Your phone supports packet data connections ( ), such as GPRS in the GSM network. See

also Essential indicators

, p. ’15’. To establish a data connection, an access point is required.

You can define different kinds of access points, such as:

R0915_en.book Page 97 Tuesday, February 8, 2005 11:46 AM

Tools

• MMS access point to, for example, send and receive multimedia messages,

Glossary: GPRS,

General Packet Radio

Service, uses packet data

technology where

information is sent in

short packets of data over

the mobile network.

• access point for the Web application to view WML or XHTML pages, and

• Internet access point (IAP) to, for example, send and receive e-mail.

Check the kind of an access point you need with your service provider for the service you

wish to access. For availability and subscription to packet data connection services, contact

your network operator or service provider.

Packet data connections in GSM and UMTS networks

When you are using your phone in GSM and UMTS networks it is possible to have multiple

data connections active at the same time; access points can share a data connection; and

data connections remain active (for example, during voice calls). For information on how

to see how many data connections are active, see Connection manager, p. ’91’. See also

network indicators in Essential indicators

, p. ’15’.

The following indicators may appear below the signal indicator, depending on which

network you are using:

- GSM network, packet data is available in the network.

- GSM network, packet data connection is active, data is being transferred.

- GSM network, multiple packet data connections are active.

- GSM network, packet data connection is on hold. (This can happen during a voice call,

for example.)

- UMTS network, packet data is available in the network.

- UMTS network, packet data connection is active, data is being transferred.

- UMTS network, multiple packet data connections are active.

- UMTS network, packet data connection is on hold.

R0915_en.book Page 98 Tuesday, February 8, 2005 11:46 AM

Tools

Receiving access point settings

You may receive access point settings in a text message from a service provider, or you may

have preset access point settings in your phone. See Receiving logos, tones, business cards,

calendar entries, and settings, p. ’52’.

• To create a new access point, select Tools→ Settings→ Connection→ Access points.

An access point may be set to be protected ( ) by your network operator or service

provider. Protected access points cannot be edited or deleted.

Access points

Options in the

Access points list: Edit,

New access point,

Delete, Help, and Exit.

Follow the instructions given to you by your service provider.

Connection name - Give a descriptive name for the connection.

Data bearer - Depending on what data connection you select, only certain setting fields

are available. Fill in all fields marked with Must be defined or with a red asterisk. Other

fields can be left empty, unless you have been instructed otherwise by your service

provider.

Options when

editing access point

settings: Change,

Advanced settings, Help,

and Exit.

To be able to use a data connection, the network service provider must support this feature,

and if necessary, activate it for your SIM card.

Access point name (for packet data only) - The access point name is needed to establish

a connection to the packet data and UMTS networks. You obtain the access point name

from your network operator or service provider.

Tip! See also

Receiving MMS and e-

mail settings, p. ’51’,

Settings for e-mail

, p. ’59’,

and Accessing the Web

, p.

’66’

User name - The user name may be needed to make a data connection, and is usually

provided by the service provider. The user name is often case-sensitive.

Prompt password - If you must enter a new password every time you log in to a server, or

if you do not want to save your password in the phone, choose Yes.

Password - A password may be needed to make a data connection, and is usually provided

by the service provider. The password is often case-sensitive.

R0915_en.book Page 99 Tuesday, February 8, 2005 11:46 AM

Tools

100

Authentication - Normal or Secure.

Homepage - Depending on what you are setting up, write either the Web address, or the

address of the multimedia messaging centre.

Select Options→ Advanced settings to change the following settings:

Glossary: DNS -

Domain Name Service. An

Internet service that

translates domain names

such as www.nokia.com

into IP addresses like

192.100.124.195

Network type - Select the Internet protocol type to be used: IPv4 settings or IPv6 settings.

Phone IP address - The IP address of your phone.

Name servers - Primary name server: The IP address of the primary DNS server, Second.

Name server: The IP address of the secondary DNS server. Contact your Internet service

provider to obtain these addresses.

Proxy serv. address - Define the address for the proxy server.

Proxy port number - Enter the proxy port number.

Packet data

The packet data settings affect all access points using a packet data connection.

Packet data conn. - If you select When available and you are in a network that supports

packet data, the phone registers to the packet data network. Also, starting an active packet

data connection is quicker (for example, to send and receive e-mail). If you select When

needed, the phone uses a packet data connection only if you start an application or action

that needs it. If there is no packet data coverage and you have chosen When available, the

phone will periodically try to establish a packet data connection.

Access point - The access point name is needed to use your phone as a packet data modem

to your computer.

Configurations

You may receive trusted server settings from your network operator or service provider in

a configuration message, or the settings may be stored on your SIM or USIM card. These

settings can be saved to your phone and viewed or deleted in Configurations.

R0915_en.book Page 100 Tuesday, February 8, 2005 11:46 AM

Tools

101

Date and time

Tip! See also the

Language settings, p. ’95’

See Clock settings

, p. ’16’.

Security

Phone and SIM

PIN (Personal Identification Number) code (4 to 8 digits) protects your SIM card against

unauthorised use. The PIN code is usually supplied with the SIM card. After three

consecutive incorrect PIN code entries, the PIN code is blocked, and you need to unblock

it before you can use the SIM card again. See the information about PUK code in this

section.

UPIN code may be supplied with the USIM card. The USIM card is an enhanced version of

the SIM card and is supported by UMTS mobile phones. The UPIN code protects the USIM

card against unauthorised use.

PIN2 code (4 to 8 digits) supplied with some SIM cards, is required to access some

functions in your phone.

Lock code (5 digits) can be used to lock the phone to avoid unauthorised use. The factory

setting for the lock code is 12345. To avoid unauthorised use of your phone, change the

lock code. Keep the new code secret and in a safe place separate from your phone.

PUK (Personal Unblocking Key) and PUK2 codes (8 digits) are required to change a

blocked PIN code or PIN2 code, respectively. If the codes are not supplied with the SIM

card, contact the operator whose SIM card is in your phone.

UPUK code may be supplied with the USIM card and is needed to unblock a UPIN code.

Wallet code is needed to use the wallet services. See Wallet

, p. ’75’.

R0915_en.book Page 101 Tuesday, February 8, 2005 11:46 AM

Tools

102

PIN code request - When active, the code is requested each time the phone is switched

on. Deactivating the PIN code request may not be allowed by some SIM cards.

PIN code, PIN2 code, and Lock code - You can change the lock code, PIN code, and PIN2

code. These codes can only include the numbers from 0 to 9.

Tip! To lock the

phone manually, press

. A list of commands

opens. Select Lock

phone.

Avoid using access codes similar to the emergency numbers to prevent accidental dialling

of the emergency number.

Autolock period - You can set an autolock period, a time-out after which the phone is

automatically locked and can be used only if the correct lock code is entered. Enter a

number for the time-out in minutes, or select None to turn off the autolock period.

To unlock the phone, enter the lock code.

Note: When the phone is locked, calls in Offline profile to certain emergency

numbers programmed into your phone are still possible.

Options in the

Fixed dialling view: Open,

Call, Activ. fixed dialling/

Deact. fixed dialling, New

contact, Edit, Delete,

Add to Contacts, Add

from Contacts, Find,

Mark/ Unmark, Help, and

Exit.

Lock if SIM changed - You can set the phone to ask for the lock code when an unknown,

new SIM card is inserted into your phone. The phone maintains a list of SIM cards that are

recognised as the owner’s cards.

Fixed dialling - You can restrict calls and text messages from your phone to selected

phone numbers, if supported by your SIM card. You need the PIN2 code for this function.

To view the list of Fixed dialling numbers, press and select Tools→ Settings→

Security → Phone and SIM→ Fixed dialling. To add new numbers to the Fixed dialling list,

select Options→ New contact or Add from Contacts. When you use fixed dialling, packet

data connections are not possible, except when sending text messages over a packet data

connection. In this case, the message centre number and the recipient’s phone number

have to be included on the fixed dialling list.

Note: When security features that restrict calls are in use (such as call barring,

closed user group and fixed dialling) calls still may be possible to the official

emergency numbers programmed into your phone.

R0915_en.book Page 102 Tuesday, February 8, 2005 11:46 AM

Tools

103

Closed user group (network service) - To specify a group of people to whom you can call

and who can call you.

Confirm SIM services (network service) - To set the phone to display confirmation

messages when you are using a SIM card service.

Certif. management

Digital certificates do not guarantee safety; they are used to verify the origins of software.

In the Certificate management main view, you can see a list of authority certificates that

have been stored in your phone. Press to see a list of personal certificates, if available.

Glossary: Digital

certificates are used to

verify the origin of the

XHTML or WML pages and

installed software.

However, they can only be

trusted if the origin of the

certificate is known to be

authentic.

Digital certificates should be used if you want to connect to an online bank or another site

or remote server for actions that involve transferring confidential information. They should

also be used if you want to reduce the risk of viruses or other malicious software and be

sure of the authenticity of software when downloading and installing software.

Important: Even if the use of certificates makes the risks involved in remote

connections and software installation considerably smaller, they must be used

correctly in order to benefit from increased security. The existence of a certificate

does not offer any protection by itself; the certificate manager must contain

correct, authentic, or trusted certificates for increased security to be available.

Certificates have a restricted lifetime. If Expired certificate or Certificate not valid

yet is shown even if the certificate should be valid, check that the current date

and time in your phone are correct.

Viewing certificate details - checking authenticity

You can only be sure of the correct identity of a server when the signature and the period

of validity of a server certificate have been checked.

You will be notified on the phone display if the identity of the server is not authentic or if

you do not have the correct security certificate in your phone.

R0915_en.book Page 103 Tuesday, February 8, 2005 11:46 AM

Tools

104

Options in the

certificate management

main view: Certificate

details, Delete, Trust

settings, Mark/Unmark,

Help, and Exit.

To check certificate details, scroll to a certificate, and select Options→ Certificate details.

When you open certificate details, Certificate management checks the validity of the

certificate, and one of the following notes may appear:

• Certificate not trusted - You have not set any application to use the certificate. See

Changing the trust settings

, p. ’104’.

• Expired certificate - The period of validity has ended for the selected certificate.

• Certificate not valid yet - The period of validity has not yet begun for the selected

certificate.

• Certificate corrupted - The certificate cannot be used. Contact the certificate issuer.

Changing the trust settings

Before changing any certificate settings, you must make sure that you really trust the

owner of the certificate and that the certificate really belongs to the listed owner.

Scroll to an authority certificate, and select Options→ Trust settings. Depending on the

certificate, a list of the applications that can use the selected certificate is shown. For

example:

• Symbian installation: Yes - The certificate is able to certify the origin of new Symbian

operating system application.

• Internet: Yes - The certificate is able to certify servers.

• App. installation: Yes - The certificate is able to certify the origin of new Java

application.

Select Options→ Edit trust setting to change the value.

Call diverting

Icon: When all calls are

diverted, is shown in

the standby mode.

1 To direct your incoming calls to your voice mailbox or another phone number, press

and select Tools→ Settings→ Call divert. For details, contact your service provider.

2 Select which calls you want to divert: Voice calls, or Data and video calls.

R0915_en.book Page 104 Tuesday, February 8, 2005 11:46 AM

Tools

105

3 Select the desired divert option. For example, If busy to divert voice calls when your

number is busy or when you reject incoming calls.

4 Set the divert option on (Activate) or off (Cancel), or check whether the option is

activated (Check status). Several divert options can be active at the same time.

Call barring and call diverting cannot be active at the same time.

Call barring (network service)

Call barring allows you to restrict the calls that can be made or received with the phone.

To change the settings, you need the barring password from your service provider. Select

the desired barring option, and set it on (Activate) or off (Cancel), or check whether the

option is active (Check status). Call barring affects all calls, including data calls.

Call barring and call diverting cannot be active at the same time.

When calls are barred, calls still may be possible to certain official emergency numbers.

Network

Nokia 6630 can automatically switch between the GSM and UMTS networks. The GSM

network is indicated with in the standby mode. The UMTS network is indicated with

Glossary: Roaming

agreement - An

agreement between two

or more network service

providers to enable the

users of one service

provider to use the

services of other service

providers.

Network mode (shown only if supported by the operator) - Select which network will be

used. If you select Dual mode, the phone will use the GSM or UMTS network automatically

according to the network parameters and the roaming agreements between the network

operators. Contact your network operator for more information.

Warning: If you set the phone to use only the GSM network, you will not be able

to make any calls, including emergency calls, or use other features requiring a

network connection, if the selected network is not available.

Operator selection - Select Automatic to set the phone to search for and select one of

the available networks, or Manual to manually select the network from a list of networks.

R0915_en.book Page 105 Tuesday, February 8, 2005 11:46 AM

Tools

106

If the connection to the manually selected network is lost, the phone will sound an error

tone and ask you to reselect a network. The selected network must have a roaming

agreement with your home network, that is, the operator whose SIM card is in your phone.

Cell info display - Select On to set the phone to indicate when it is used in a cellular

network based on microcellular network (MCN) technology and to activate cell info

reception.

Enhancement settings

Indicators shown in the

standby mode:

- a headset is

connected.

- a loopset is

connected.

- headset

unavailable, connection

to a Bluetooth headset

has been lost.

Select the enhancement: Headset, Loopset, Bluetooth handsfree, or Car kit.

• Select Default profile to set the profile that you want activated each time you connect

a certain enhancement to your phone. See Profiles - setting tones

, p. ’12’.

• Select Automatic answer to set the phone to answer an incoming call automatically

after five seconds. If the Ringing type is set to Beep once or Silent, automatic answer

is disabled.

Voice commands

Press and select Tools→ Voice com.. Voice commands allows you to add, delete, and

control voice commands in your phone. Voice commands are recorded the same way as

voice tags. See Adding a voice tag to a phone number

, p. ’30’.

Adding a voice command to an application

You can have only one voice command per application.

1 Select the application to which you want to add a voice command.

To add a new application to the list, select Options→ New application.

2 Select Options → Add voice command. See Adding a voice tag to a phone number

, p.

’30’

R0915_en.book Page 106 Tuesday, February 8, 2005 11:46 AM

Tools

107

Application manager

Press and select Tools→ Manager. You can install two types of applications and

software to your phone:

• J2ME™ applications based on Java™ technology with the extension .jad or .jar ( ).

Do not download PersonalJava™ applications to your phone as they cannot be installed.

Example: If you

have received the

installation file as an

e-mail attachment, go to

your mailbox, open the

e-mail, open the

Attachments view, scroll

to the installation file,

and press to start

installation.

• Other applications and software suitable for the Symbian operating system ( ). The

installation files have the .sis extension. Only install software specifically designed for

Nokia 6630.

Installation files may be transferred to your phone from a compatible computer,

downloaded during browsing, or sent to you in a multimedia message, as an e-mail

attachment, or using Bluetooth. You can use Nokia Application Installer in Nokia PC Suite

to install an application to your phone or a memory card. If you are using Microsoft

Windows Explorer to transfer a file, place the file on a memory card (local disk).

Installing applications and software

Icons:

- .sis application

- Java application

- application is not

fully installed

- application is

installed on the memory

card.

Important: Only install applications from sources that offer adequate protection

against harmful software.

• Before installation, select Options→ View details to view information such as the

application type, version number, and the supplier or manufacturer of the application.

• Before installation, select Options→ View certificate to display the security certificate

details of the application. See Certif. management

, p. ’103’.

• If you install a file that contains an update or repair to an existing application, you can

only restore the original application if you have the original installation file or a full

back-up copy of the removed software package. To restore the original application,

remove the application, and install the application again from the original installation

file or the back-up copy.

R0915_en.book Page 107 Tuesday, February 8, 2005 11:46 AM

Tools

108

Tip! You can also use

Nokia Application

Installer available in

Nokia PC Suite to install

applications. See the

CD-ROM supplied in the

sales package.

• The .jar file is required for installing Java applications. If it is missing, the phone may

ask you to download it. If there is no access point defined for the application, you will

be asked to select one. When you are downloading the .jar file, you may need to enter

a user name and password to access the server. You obtain these from the supplier or

manufacturer of the application.

1 Open Application manager, and scroll to an installation file.

Alternatively, search the phone memory or the memory card, select the application, and

press to start the installation.

2 Select Options→ Install.

Tip! While browsing,

you can download an

installation file and

install it without closing

the connection.

During installation, the phone shows information about the progress of the installation.

If you are installing an application without a digital signature or certification, the

phone displays a warning. Continue installation only if you are sure of the origins and

contents of the application.

Options in the

Applications main view:

Install, View details, Go

to Web address, View

certificate, Send, Remove,

App. downloads, View log,

Send log, Update,

Settings, Help, and Exit.

• To start an installed application, locate it in the menu, and press .

• To start a network connection and to view extra information about the application,

scroll to it, and select Options→ Go to web address, if available.

• To see what software packages have been installed or removed and when, select

Options→ View log.

• To send your installation log to a help desk so that they can see what has been installed

or removed, select Options→ Send log→ Via text message, or Via e-mail (available

only if the correct e-mail settings are in place).

Removing applications and software

Scroll to a software package, and select Options→ Remove. Press Yes to confirm.

If you remove software, you can only re-install it if you have the original software package

or a full back-up of the removed software package. If you remove a software package, you

may no longer be able to open documents created with that software.

R0915_en.book Page 108 Tuesday, February 8, 2005 11:46 AM

Tools

109

Note: If another software package depends on the software package that you

removed, the other software package may stop working. Refer to the documentation

of the installed software package for details.

Application settings

• Software installation - Select the kind of software you want installed: On, Signed only,

or Off.

• Online certif. check - Select if you want Application manager to check the online

certificates for an application before installing it.

• Default web address - Default address used when checking online certificates.

Some Java applications may require a phone call, a message to be sent, or a network

connection to be made to a specific access point for downloading extra data or

components. In the Applications main view, scroll to an application, and select Options→

Suite settings to change settings related to that specific application.

Activation keys - handling copyright

protected files

being copied, modified, transferred, or forwarded.

Press and select Tools→ Activ. keys to view the digital rights activation keys stored in

your phone.

• Valid keys ( ) are connected to one or more media file.

• With expired keys ( ) you have run out of time to use the media file, or the time

period for using the file is exceeded. To view the Expired activation keys, press .

• To buy more usage time or extend the usage period for a media file, select an activation

key, and select Options→ Activate content. Activation keys cannot be updated if Web

service message reception is disabled. See Settings for Web service messages

, p. ’61’.

R0915_en.book Page 109 Tuesday, February 8, 2005 11:46 AM

Tools

110

• To view which keys are not in use at the moment (Not used), press twice. Unused

activation keys have no media files connected to them saved in the phone.

• To view detailed information such as the validity status and ability to send the file,

select an activation key and press .

Transfer - transferring content from

another phone

Press and select Tools→ Transfer to copy contacts, calendar, images, video, and sound

clips using Bluetooth from a compatible Series 60 phone such as Nokia 6600 and Nokia

7610 to your Nokia 6630. You can use your Nokia 6630 without a SIM card. Offline profile

is automatically activated when the phone is switched on without a SIM card. This allows

you to use the SIM card in another phone. Follow the instructions on the screen.

To avoid duplicate entries, you can transfer the same type of information, for example

contacts, from the other phone to your phone only once. If you want to transfer the same

information again, you may need to send the Transfer application again to the other device,

and install it again.

The copying process goes through the following steps:

1 Turn on Bluetooth in your Nokia 6630 and in the other phone. See Bluetooth

connection, p. ’87’.

2 Open the Transfer application in Nokia 6630. Follow the instructions that appear on the

screen.

3 The Data transfer application is sent to the other phone.

4 Install the Transfer application to the other phone. The application will start

automatically, and is added to the main Menu.

5 The phones need to be paired. For further information on pairing, see Sending data

using Bluetooth, Pairing, p. ’88’.

6 Select what content you want to be copied to your Nokia 6630.

R0915_en.book Page 110 Tuesday, February 8, 2005 11:46 AM

Tools

111

7 Content is copied from the memory and memory card of the other phone (if available)

to your Nokia 6630. Copying time depends on the amount of data to be transferred. You

can cancel copying and continue later.

Device manager - service provider

configuration

Press and select Tools→ Dev. mgr.. You may receive server profiles and different

configuration settings from your network operator, service provider, or company

information management department. These configuration settings may include access

point settings for data connections and other settings used by different applications in

your phone.

• To connect to a server and receive configuration settings for your phone, select Start

configuration.

• To allow or deny receiving of configuration settings from a service provider, select

Enable config. or Disable config..

Server profile settings

Contact your service provider for the correct settings.

• Server name - Enter a name for the configuration server.

• Server ID - Enter the unique ID to identify the configuration server.

• Server password - Enter a password to identify your phone to the server.

• Access point - Select an access point to be used when connecting to the server.

• Host address - Enter the URL address of the server.

• Port - Enter the port number of the server.

• User name and Password - Enter your user name and password.

• Allow configuration - To receive configuration settings from the server, select Yes.

R0915_en.book Page 111 Tuesday, February 8, 2005 11:46 AM

Tools

112

• Auto-accept all reqs.. - If you want the phone to ask for confirmation before accepting

a configuration from the server, select No.

R0915_en.book Page 112 Tuesday, February 8, 2005 11:46 AM

Battery information

113

Battery information

Charging and Discharging

Your device is powered by a rechargeable battery. The full

performance of a new battery is achieved only after two or

three complete charge and discharge cycles. The battery can

be charged and discharged hundreds of times but it will

eventually wear out. When the talk and standby times are

noticeably shorter than normal, buy a new battery. Use only

Nokia approved batteries, and recharge your battery only with

Nokia approved chargers designated for this device.

Always switch the device off and disconnect the charger

before removing the battery.

Unplug the charger from the electrical plug and the device

when not in use. Do not leave the battery connected to a

charger. Overcharging may shorten its lifetime. If left unused,

a fully charged battery will lose its charge over time.

Temperature extremes can affect the ability of your battery to

charge.

Use the battery only for its intended purpose. Never use any

charger or battery that is damaged.

Do not short-circuit the battery. Accidental short-circuiting

can occur when a metallic object such as a coin, clip, or pen

causes direct connection of the positive (+) and negative (-)

terminals of the battery. (These look like metal strips on the

battery.) This might happen, for example, when you carry a

spare battery in your pocket or purse. Short-circuiting the

terminals may damage the battery or the connecting object.

Leaving the battery in hot or cold places, such as in a closed

car in summer or winter conditions, will reduce the capacity

and lifetime of the battery. Always try to keep the battery

between 15°C and 25°C (59°F and 77°F). A device with a hot

or cold battery may not work temporarily, even when the

battery is fully charged. Battery performance is particularly

limited in temperatures well below freezing.

Do not dispose of batteries in a fire! Dispose of batteries

according to local regulations. Please recycle when possible.

Do not dispose as household waste.

CARE AND MAINTENANCE

Your device is a product of superior design and craftsmanship

and should be treated with care. The suggestions below will

help you protect your warranty coverage.

• Keep the device dry. Precipitation, humidity and all types

of liquids or moisture can contain minerals that will

corrode electronic circuits. If your device does get wet,

remove the battery and allow the device to dry completely

before replacing it.

• Do not use or store the device in dusty, dirty areas. Its

moving parts and electronic components can be damaged.

• Do not store the device in hot areas. High temperatures

can shorten the life of electronic devices, damage

batteries, and warp or melt certain plastics.

R0915_en.book Page 113 Tuesday, February 8, 2005 11:46 AM

ADDITIONAL SAFETY INFORMATION

114

• Do not store the device in cold areas. When the device

returns to its normal temperature, moisture can form

inside the device and damage electronic circuit boards.

• Do not attempt to open the device other than as

instructed in this guide.

• Do not drop, knock, or shake the device. Rough handling

can break internal circuit boards and fine mechanics.

• Do not use harsh chemicals, cleaning solvents, or strong

detergents to clean the device.

• Do not paint the device. Paint can clog the moving parts

and prevent proper operation.

• Use a soft, clean, dry cloth to clean any lenses (such as

camera, proximity sensor, and light sensor lenses).

• Use only the supplied or an approved replacement

antenna. Unauthorised antennas, modifications, or

attachments could damage the device and may violate

regulations governing radio devices.

All of the above suggestions apply equally to your device,

battery, charger, or any enhancement. If any device is not

working properly, take it to the nearest authorized service

facility for service.

ADDITIONAL SAFETY INFORMATION

Operating environment

Remember to follow any special regulations in force in any

area and always switch off your device when its use is

prohibited or when it may cause interference or danger. Use

the device only in its normal operating positions. To maintain

compliance with radio frequency exposure guidelines only use

enhancements approved by Nokia for use with this device.

When the device is on and being worn on the body, always

use an approved holder or carrying case.

Medical devices

Operation of any radio transmitting equipment, including

wireless phones, may interfere with the functionality of

inadequately protected medical devices. Consult a physician

or the manufacturer of the medical device to determine if

they are adequately shielded from external RF energy or if you

have any questions. Switch off your device in health care

facilities when any regulations posted in these areas instruct

you to do so. Hospitals or health care facilities may be using

equipment that could be sensitive to external RF energy.

Pacemakers Pacemaker manufacturers recommend that a

minimum separation of 6 in. (15.3 cm) be maintained between

a wireless phone and a pacemaker to avoid potential

interference with the pacemaker. These recommendations are

consistent with the independent research by and

recommendations of Wireless Technology Research. Persons

with pacemakers should:

• always keep the device more than 6 in. (15.3 cm) from their

pacemaker when the device is switched on;

• not carry the device in a breast pocket; and

• hold the device to the ear opposite the pacemaker to

minimise the potential for interference.

If you have any reason to suspect that interference is taking

place, switch off your device immediately.

R0915_en.book Page 114 Tuesday, February 8, 2005 11:46 AM

ADDITIONAL SAFETY INFORMATION

115

Hearing aids Some digital wireless devices may interfere

with some hearing aids. If interference occurs, consult your

service provider.

Vehicles

RF signals may affect improperly installed or inadequately

shielded electronic systems in motor vehicles such as

electronic fuel injection systems, electronic antiskid (antilock)

braking systems, electronic speed control systems, air bag

systems. For more information, check with the manufacturer

or its representative of your vehicle or any equipment that has

been added.

Only qualified personnel should service the device, or install

the device in a vehicle. Faulty installation or service may be

dangerous and may invalidate any warranty that may apply to

the device. Check regularly that all wireless device equipment

in your vehicle is mounted and operating properly. Do not store

or carry flammable liquids, gases, or explosive materials in the

same compartment as the device, its parts, or enhancements.

For vehicles equipped with an air bag, remember that air bags

inflate with great force. Do not place objects, including

installed or portable wireless equipment in the area over the

air bag or in the air bag deployment area. If in-vehicle wireless

equipment is improperly installed and the air bag inflates,

serious injury could result.

Using your device while flying in aircraft is prohibited. Switch

off your device before boarding an aircraft. The use of wireless

teledevices in an aircraft may be dangerous to the operation

of the aircraft, disrupt the wireless telephone network, and

may be illegal.

Potentially explosive environments

Switch off your device when in any area with a potentially

explosive atmosphere and obey all signs and instructions.

Potentially explosive atmospheres include areas where you

would normally be advised to turn off your vehicle engine.

Sparks in such areas could cause an explosion or fire resulting

in bodily injury or even death. Switch off the device at

refuelling points such as near gas pumps at service stations.

Observe restrictions on the use of radio equipment in fuel

depots, storage, and distribution areas, chemical plants or

where blasting operations are in progress. Areas with a

potentially explosive atmosphere are often but not always

clearly marked. They include below deck on boats, chemical

transfer or storage facilities, vehicles using liquefied

petroleum gas (such as propane or butane), and areas where

the air contains chemicals or particles such as grain, dust or

metal powders.

Emergency calls

Important: Wireless phones, including this device,

operate using radio signals, wireless networks, landline

networks, and user-programmed functions. Because of

this, connections in all conditions cannot be guaranteed.

You should never rely solely on any wireless device for

essential communications like medical emergencies.

To make an emergency call:

If the device is not on, switch it on. Check for adequate

signal strength.

Some networks may require that a valid SIM or USIM card

is properly inserted in the device.

R0915_en.book Page 115 Tuesday, February 8, 2005 11:46 AM

ADDITIONAL SAFETY INFORMATION

116

2 Press as many times as needed to clear the display and

ready the device for calls.

3 Enter the official emergency number for your present

location. Emergency numbers vary by location.

4 Press the key.

If certain features are in use, you may first need to turn those

features off before you can make an emergency call. Consult

this guide or your service provider for more information.

When making an emergency call, give all the necessary

information as accurately as possible. Your wireless device

may be the only means of communication at the scene of an

accident. Do not end the call until given permission to do so.

WARNING! In Offline profile you cannot make

calls, except calls to certain emergency numbers,

or use features that require network coverage.

Certification information (SAR)

THIS DEVICE MEETS INTERNATIONAL GUIDELINES FOR

EXPOSURE TO RADIO WAVES

Your mobile device is a radio transmitter and receiver. It is

designed and manufactured not to exceed the limits for

exposure to radio frequency (RF) recommended by

international guidelines (ICNIRP). These limits are part of

comprehensive guidelines and establish permitted levels of RF

energy for the general population. The guidelines were

developed by independent scientific organisations through

periodic and thorough evaluation of scientific studies. The

guidelines include a substantial safety margin designed to

assure the safety of all persons, regardless of age and health.

The exposure standard for mobile devices employs a unit of

measurement known as the Specific Absorption Rate, or SAR.

The SAR limit stated in the international guidelines is 2.0 W/

kg*. Tests for SAR are conducted using standard operating

positions with the device transmitting at its highest certified

power level in all tested frequency bands. Although the SAR is

determined at the highest certified power level, the actual SAR

of the device while operating can be well below the maximum

value. This is because the device is designed to operate at

multiple power levels so as to use only the power required to

reach the network. In general, the closer you are to a base

station, the lower the power output of the device.

The highest SAR value for this device when tested for use at

the ear is 0.83 W/kg.

This device meets RF exposure guidelines when used either in

the normal use position against the ear or when positioned at

least 1.5 cm away from the body. When a carry case, belt clip

or holder is used for body-worn operation, it should not

contain metal and should position the product at least 1.5 cm

away from your body.

In order to transmit data files or messages, this device requires

a quality connection to the network. In some cases,

transmission of data files or messages may be delayed until

such a connection is available. Ensure the above separation

distance instructions are followed until the transmission is

completed.

* The SAR limit for mobile devices used by the public is 2.0

watts/kilogram (W/kg) averaged over ten grams of body tissue.

The guidelines incorporate a substantial margin of safety to

give additional protection for the public and to account for

any variations in measurements. SAR values may vary

depending on national reporting requirements and the

network band. For SAR information in other regions please

look under product information at www.nokia.com.

R0915_en.book Page 116 Tuesday, February 8, 2005 11:46 AM

117

Index

access points 97

settings

activation keys

109

alarms

alarm clock

calendar alarms

applications, Java

107

Bluetooth

connecting two devices, pairing

connection requests

connection status indicators

device address

device icons

factory set passcode

headset

106

pairing requests

pairing, glossary explanation

passcode, glossary explanation

switching off

bookmark, glossary explanation

brightness

display

setting in camera

cache

clearing

calendar

alarm

sending entries

stopping a calendar alarm

synchronising PC Suite

call register

see log

calls

dialled numbers

duration

international

received

settings

settings for call divert

104

transferring

camera

adjusting brightness

adjusting contrast

night mode

saving video clips

self-timer

sending images

sequence mode

video recorder settings

CD-ROM

certificates

103

chat

see instant messaging

clear screen

See standby mode

clock

alarm

settings

snooze

codes

101

lock code

PIN code

101

PIN2 code

101

computer connections

conference call

connection settings

contact cards

inserting pictures

storing DTMF tones

contrast

setting in camera

copying

contacts between the SIM card and

device memory

text

R0915_en.book Page 117 Tuesday, February 8, 2005 11:46 AM

118

see activation keys

cutting text

data connections

details

ending

indicators

date

settings

101

digital rights management, DRM

see activation keys

DNS, domain name service, glossary

explanation

100

editing videos 38

adding effects

adding sound clips

adding transitions

custom video clips

e-mail

offline

opening

remote mailbox

retrieving from mailbox

settings

viewing attachments

file formats

JAD file

JAR file

108

RealOne Player

SIS file

107

file manager

fixed dialling

102

gallery 36

handsfree

see loudspeaker

headset settings

106

indicators 15

instant messaging

blocking

connecting to a server

groups

individual conversations

recording the messages

sending a private message

sending instant messages

user ID, glossary explanation

internet access points (IAP)

See access points

IP address, glossary explanation

100

Java

See applications, Java

lock code 101

log

erasing contents

filtering

log duration

loopset settings

106

loudspeaker

activating

turning off

mailbox 53

media files

fast forward

file formats

mute sound

rewind

memory

clearing memory

viewing memory consumption

memory card

memory card adapter

see the Quick Start Guide, reduced-

size MultiMediaCard adapter

rearranging

messaging

e-mail

multimedia message

text message

R0915_en.book Page 118 Tuesday, February 8, 2005 11:46 AM

119

movies, muvees

custom muvees

quick muvees

multimedia messages

mute sound

my home city

packet data connections 91

GPRS, glossary explanation

settings

100

pasting text

PC connections

via Bluetooth or USB cable

PC Suite

calendar data

synchronisation

transfering images to a PC

viewing phone memory data

personalisation

PIN code

101

recording video 36

recording voice tags

30, 106

reminder

See calendar, alarm

remote mailbox

resolution, glossary explanation

ringing tones

adding a personal ringing tone

receiving in a text message

removing a personal ringing tone

RSMMC, reduced-size MMC

see the Quick Start Guide

security code

see lock code

sending

calendar entries

contact cards, business cards

images

video clips

service commands

settings

access codes

101

access points

Bluetooth

calendar

call barring

105

call diverting

104

certificates

103

data connections

date and time

101

display

headset

106

IM settings

80, 81, 86

language

lock code

101

loopset

106

original settings

personalising the phone

PIN code

101

screen saver

UPIN code

101

UPUK code

101

wallet

wallet code

101

shortcuts

camera

see the Quick Start Guide

web connection

SIM card

copying names and numbers to

phone

messages

names and numbers

SIS file

107

SMS centre, short message service

centre

snooze

alarm clock

calendar alarm

software

transferring a file to your device

107

sound clips

sounds

muting a ringing tone

personalising

recording sounds

R0915_en.book Page 119 Tuesday, February 8, 2005 11:46 AM

120

speed dialling 22

standby mode

synchronisation

text message 49

text message service centre

adding new

thumbnail images

in a contact card

time

settings

101

transfering content from another

phone

110

UPIN code 101

UPUK code

101

USB cable

USIM card

see glossary explanation in the

Quick Start Guide

USSD commands

video call 21

answering

rejecting

video clips

video player

See RealOne Player

video recorder

see camera

voice dialling

30, 106

voice mailbox

changing the phone number

diverting calls to voice mailbox

104

voice messages

voice tags

30, 106

adding

30, 106

making calls

volume control

during a call

loudspeaker

wallet 75

entering the wallet code

resetting wallet code

settings

storing card details

viewing ticket details

wallet code

76, 101

web

access points, see access points

R0915_en.book Page 120 Tuesday, February 8, 2005 11:46 AM

Report abuse

Libble takes abuse of its services very seriously. We're committed to dealing with such abuse according to the laws in your country of residence. When you submit a report, we'll investigate it and take the appropriate action. We'll get back to you only if we require additional details or have more information to share.

Product:

Forumrules

To achieve meaningful questions, we apply the following rules:

First, read the manual;
Check if your question has been asked previously;
Try to ask your question as clearly as possible;
Did you already try to solve the problem? Please mention this;
Is your problem solved by a visitor then let him/her know in this forum;
To give a response to a question or answer, do not use this form but click on the button 'reply to this question';
Your question will be posted here and emailed to our subscribers. Therefore, avoid filling in personal details.

new questions and answers
new manuals

You will receive an email to register for one or both of the options.

Get your user manual by e-mail

Enter your email address to receive the manual of Nokia 6630 in the language / languages: English as an attachment in your email.

The manual is 5,16 mb in size.

You will receive the manual in your email within minutes. If you have not received an email, then probably have entered the wrong email address or your mailbox is too full. In addition, it may be that your ISP may have a maximum size for emails to receive.

Others manual(s) of Nokia 6630

Nokia 6630 User Manual - German - 133 pages

Nokia 6630 User Manual - Dutch - 129 pages

Nokia 6630 User Manual - French - 134 pages

The manual is sent by email. Check your email

If you have not received an email with the manual within fifteen minutes, it may be that you have a entered a wrong email address or that your ISP has set a maximum size to receive email that is smaller than the size of the manual.

The email address you have provided is not correct.

Please check the email address and correct it.

Your question is posted on this page

Would you like to receive an email when new answers and questions are posted? Please enter your email address.

Info

Nokia 6630 Manual

Product: