751124

Nokia 6500A Manual

16
Zoom out
Zoom in
Previous page
1/44
Next page
standby mode and the screen is o.
7. Tuner mode
Note: If you don’t want to perform a tuner scan, select one of the available options anyway. You can skip the
scan at some later stage of the installation wizard. If you skip this step you can perform a channel search later
using the related Channels menu options.
The next step is the selection of the tuner mode. Select your tuner preference to install channels for Live TV
function. Antenna, Cable and Satellite options are available. Highlight the option that corresponds to your
environment and press OK or Right directional button to proceed.
7.1. Antenna
If Antenna option is selected, the TV will search for digital terrestrial and analogue broadcasts. On the
next screen highlight Scan option and press OK to start the search or select Skip Scan to continue without
performing a search.
7.2. Cable
If Cable option is selected, the TV will search for digital cable and analogue broadcasts. If any, available operator
options will be listed on the Select Operator screen. Otherwise this step will be skipped. You can select only
one operator from the list. Highlight the desired operator and press OK or the Right directional button to
proceed. On the next screen select Scan option to start a search or select Skip Scan to continue without
performing a search. If Scan is selected a conguration screen will be displayed next. Scan Mode, Frequency
(kHz), Modulation, Symbol Rate (kSym/s), Network ID options may need to be set. To perform a full scan set
the Scan Mode as Full/Advance if available. Depending on the selected operator and/or Scan Mode some
options may not be available to be set.
Once you are done with setting available options, press the Right directional button to proceed. The TV will
start to search available broadcasts.
7.3. Satellite
If Satellite option is selected, Satellite Type screen will be displayed next. Preferred Satellite and General
Satellite options will be available. Select one and press OK to proceed.
Note: Preferred Satellite and General Satellite options may not be available depending on the selected country.
In this case the DVBS Conguration Setting screen will be displayed after selecting the tuner mode as Satellite.
If Preferred Satellite option is selected, next screen will be Select Operator screen. You can select only one
operator from the list. Highlight the desired operator and press OK or the Right directional button to proceed.
Some of the following options may be preset depending on the selected operator in this step. Check the
parameters before proceeding and adjust if necessary.
7.4. DVB–S conguration
DVB–S Conguration Setting screen will be displayed next. First Antenna type should be set (This option may
be named as Satellite type depending on the country selection.) Universal, Single Cable and Jess Singlecable
options are available. Set the Antenna Type as Universal for Direct and DiSEqC satellite systems. If you set
the antenna type as Universal, press the Right directional button to proceed to the next step. If the antenna
type is set as Single Cable or Jess Singlecable, there will be three more additional options on the DVB–S
Conguration Setting screen: Tuner, Band frequency and User Dened. User Dened option will be available
if the Band frequency is set as User Dened. Set these options if available and press the Right directional
button to proceed.
Depending on the country and satellite type selections you made in the earlier steps of the initial setup
process, Load Preset List screen may be displayed next. Highlight Load Preset List and press OK or the Right
directional button to proceed with the SatcoDX installation. You can also skip this step by selecting Skip option.
After the parameters on the DVB–S Conguration Setting screen are congured according to your environment
16
… 16 …


Need help? Post your question in this forum.

Forumrules


Report abuse

Libble takes abuse of its services very seriously. We're committed to dealing with such abuse according to the laws in your country of residence. When you submit a report, we'll investigate it and take the appropriate action. We'll get back to you only if we require additional details or have more information to share.

Product:

For example, Anti-Semitic content, racist content, or material that could result in a violent physical act.

For example, a credit card number, a personal identification number, or an unlisted home address. Note that email addresses and full names are not considered private information.

Forumrules

To achieve meaningful questions, we apply the following rules:

Register

Register getting emails for Nokia 6500A at:


You will receive an email to register for one or both of the options.


Get your user manual by e-mail

Enter your email address to receive the manual of Nokia 6500A in the language / languages: English as an attachment in your email.

The manual is 1,49 mb in size.

 

You will receive the manual in your email within minutes. If you have not received an email, then probably have entered the wrong email address or your mailbox is too full. In addition, it may be that your ISP may have a maximum size for emails to receive.

Others manual(s) of Nokia 6500A

Nokia 6500A User Manual - German - 43 pages

Nokia 6500A User Manual - Dutch - 46 pages

Nokia 6500A User Manual - French - 47 pages

Nokia 6500A Installation Guide - All languages - 32 pages


The manual is sent by email. Check your email

If you have not received an email with the manual within fifteen minutes, it may be that you have a entered a wrong email address or that your ISP has set a maximum size to receive email that is smaller than the size of the manual.

The email address you have provided is not correct.

Please check the email address and correct it.

Your question is posted on this page

Would you like to receive an email when new answers and questions are posted? Please enter your email address.



Info