297291
51
Zoom out
Zoom in
Previous page
1/66
Next page
Reference Information
Copyright © 2004 Nokia. All rights reserved. 51
17. Reference Information
Access Codes
You can use the access codes described in this
section to avoid unauthorised use of your phone
and SIM card.
The access codes (except PUK and PUK2 codes)
can be changed by using Menu 4-5-6. See the
following section.
NOTE: Avoid using access codes similar
to emergency numbers, such as 112, to
prevent accidential dialling of the emer-
gency number.
Security Code (5 digits)
The security code can be used to avoid unautho-
rised use of your phone. The security code (se-
curity code) is usually supplied with the
phone. Change the security code before you start
using your phone. Keep the new code secret and
in a safe place, which is separate from the phone.
The default code is 12345.
NOTE: If you key in an incorrect security
code five times in succession, the phone
will not accept the correct code for the
next five minutes.
PIN Code (4 to 8 digits)
The PIN (Personal Identification Number) code
protects your SIM card against unauthorised use.
The PIN code is usually supplied with the SIM
card. When the PIN code request is enabled
(Menu 4-5-1), the code is asked each time the
phone is switched on.
NOTE: If you key in a wrong PIN code
three times in succession, key in the PUK
code and press OK. Key in a new PIN
code and press OK. Key in the new code
again and press OK.
PIN2 Code (4 to 8 digits)
The PIN2 code, supplied with some SIM cards, is
required to access some functions, such as
charging unit counters. These functions are only
available if supported by your SIM card.
NOTE: If you key in a wrong PIN2 code
three times in succession, follow the
same instructions as for the PIN code
but this time using the PUK2 code.
PUK Code (8 digits)
The PUK (Personal Unblocking Key) code is re-
quired to change a blocked PIN code. The PUK
code may be supplied with the SIM card. If not,
contact your local service provider for the code. If
you lose the code, contact your service provider.
PUK2 Code (8 digit)
The PUK2 code, supplied with some SIM cards, is
required to change a blocked PIN2 code. If you
lose the code, contact your service provider.
Barring Password
The barring password is needed when using the
‘Call Barring’ function. You obtain the password
from your service provider.
DTMF Tones
The phone can send DTMF tones to communicate
with answering machines, computerised tele-
phony services etc.
51


Need help? Post your question in this forum.

Forumrules


Report abuse

Libble takes abuse of its services very seriously. We're committed to dealing with such abuse according to the laws in your country of residence. When you submit a report, we'll investigate it and take the appropriate action. We'll get back to you only if we require additional details or have more information to share.

Product:

For example, Anti-Semitic content, racist content, or material that could result in a violent physical act.

For example, a credit card number, a personal identification number, or an unlisted home address. Note that email addresses and full names are not considered private information.

Forumrules

To achieve meaningful questions, we apply the following rules:

Register

Register getting emails for Nokia 6150 at:


You will receive an email to register for one or both of the options.


Get your user manual by e-mail

Enter your email address to receive the manual of Nokia 6150 in the language / languages: English as an attachment in your email.

The manual is 0,93 mb in size.

 

You will receive the manual in your email within minutes. If you have not received an email, then probably have entered the wrong email address or your mailbox is too full. In addition, it may be that your ISP may have a maximum size for emails to receive.

Others manual(s) of Nokia 6150

Nokia 6150 User Manual - German - 96 pages


The manual is sent by email. Check your email

If you have not received an email with the manual within fifteen minutes, it may be that you have a entered a wrong email address or that your ISP has set a maximum size to receive email that is smaller than the size of the manual.

The email address you have provided is not correct.

Please check the email address and correct it.

Your question is posted on this page

Would you like to receive an email when new answers and questions are posted? Please enter your email address.



Info