751121
22
Zoom out
Zoom in
Previous page
1/44
Next page
setup process.
Channel Skip: Select the channels to be skipped when switching channels using the Programme +/- buttons
on the remote control. Highlight the desired channels in the list and press OK to select them.
Channel Swap: Swap the position of two selected channels in the channel list. Highlight the desired channel
in the list and press OK. Select the second desired channel and swap the position of these two channels. You
should set the LCN option to O or Default to enable this feature.
Channel Move: Move a channel to the position of another one. Highlight the channel you want to move and
press OK. Highlight the second channel and it will be moved to the position of the rst channel. You should
set the LCN option to O or Default to enable this feature.
Channel Edit: Edit channels in the channel list. Edit the name and the channel number of the
selected channel and display information about Network Name, Frequency, Colour System, Sound System,
Modulation and Symbol Rate. Depending on the channel other options may also be editable. You can press
the Blue button to delete the highlighted channel.
Analogue Channel Fine-tune: Fine-tune an analogue channel. A list of available
analogue channels will be displayed. Select the desired channel from the list and press OK. Then change the
frequency of the channel by pressing Left/Right directional buttons. Press OK to store the new frequency
for that channel. Press Back to cancel. This item may not be visible, depending on whether the last watched
channel was analogue or not.
Clear Channel List: Delete all channels stored in the channel list of the selected channel installation
mode. A dialogue will be displayed for conrmation. Highlight OK and press OK to proceed. Highlight Cancel
and press OK to cancel the deletion process.
Note: Some options may not be available and appear as grayed out depending on the operator selection and
operator related settings.
10.2.3. Channel installation Mode-Preferred Satellite
Satellite Re-scan: The satellite search process will be performed again.
Satellite Add: This function is useful when the General Satellite option is selected as the TV signal type.
When the Preferred Satellite option is selected, DiSEqC settings will be automatically determined and
channels from new satellite providers will be added from new selected satellites, depending on the selected
satellite provider.
Satellite Update: If you select the Scan function, the receivable satellites and the corresponding DiSEqC
settings will be determined automatically and the new channels will be added.
Satellite Manual Tuning: Select the satellite on which you want to perform the manual search of the
satellite transponder and press OK. Set the exact reception parameters of the desired satellite transponder
(frequency, symbol rate and polarization). Make sure that the signal quality and signal level indicate a
sucient value and press the Back button. Press the Right directional button to start the search. The
found programs will be saved at the end of the program list.
Channel Skip: Select the channels to be skipped when switching channels using the Programme +/- buttons
on the remote control. Highlight the desired channels in the list and press OK to select them.
Channel Swap: Swap the position of two selected channels in the channel list. Highlight the desired channel
in the list and press OK. Select the second desired channel and swap the position of these two channels. You
should set the LCN option to O or Default to enable this feature.
Channel Move: This function is partially available in the “Preferred Satellite” satellite installation mode. The
channel list of the selected providers cannot be edited.
Channel Edit: Edit channels in the channel list. Edit the name and the channel number of the selected
channel and display information about Network Name, Frequency, Colour System, Sound System,
Modulation and Symbol Rate. Depending on the channel other options may also be editable. You can press
the Blue button to delete the highlighted channel.
Clear Channel List: Delete all channels stored in the channel list of the selected channel installation mode.
A dialogue will be displayed for conrmation. Highlight OK and press OK to proceed. Highlight Cancel and
press OK to cancel the deletion process.
10.2.4. Channel installation Mode-General Satellite
Satellite Re-scan: The satellite search process will be performed again. As an option, you can activate
another receivable satellite and add it to the automatic search. Select another satellite and press OK.
Set the exact reception parameters of the desired satellite, the DiSEqC connections and the reception
parameters of a receivable satellite transponder (the frequency, the symbol rate and the polarization). Make
sure that the signal quality and signal level indicate a sucient value and press the Back button. Press the
22
22


Need help? Post your question in this forum.

Forumrules


Report abuse

Libble takes abuse of its services very seriously. We're committed to dealing with such abuse according to the laws in your country of residence. When you submit a report, we'll investigate it and take the appropriate action. We'll get back to you only if we require additional details or have more information to share.

Product:

For example, Anti-Semitic content, racist content, or material that could result in a violent physical act.

For example, a credit card number, a personal identification number, or an unlisted home address. Note that email addresses and full names are not considered private information.

Forumrules

To achieve meaningful questions, we apply the following rules:

Register

Register getting emails for Nokia 5000A at:


You will receive an email to register for one or both of the options.


Get your user manual by e-mail

Enter your email address to receive the manual of Nokia 5000A in the language / languages: English as an attachment in your email.

The manual is 1,49 mb in size.

 

You will receive the manual in your email within minutes. If you have not received an email, then probably have entered the wrong email address or your mailbox is too full. In addition, it may be that your ISP may have a maximum size for emails to receive.

Others manual(s) of Nokia 5000A

Nokia 5000A User Manual - German - 43 pages

Nokia 5000A User Manual - Dutch - 46 pages

Nokia 5000A User Manual - French - 47 pages

Nokia 5000A Installation Guide - All languages - 32 pages


The manual is sent by email. Check your email

If you have not received an email with the manual within fifteen minutes, it may be that you have a entered a wrong email address or that your ISP has set a maximum size to receive email that is smaller than the size of the manual.

The email address you have provided is not correct.

Please check the email address and correct it.

Your question is posted on this page

Would you like to receive an email when new answers and questions are posted? Please enter your email address.



Info