774479
35
Zoom out
Zoom in
Previous page
1/46
Next page
35
In timeshifting mode, the programme is paused and simultaneously recorded to the connected USB storage
device. Press Pause/Play button while watching a broadcast to activate timeshifting mode. Press Pause/ Play
button again to resume the paused programme from where you stopped. Press and hold REC button for 3
seconds to stop timeshift recording and return to the live broadcast.
When this feature is used for the rst time Disk Setup wizard will be displayed when the Pause/Play button is
pressed. You can either choose Auto or Manual setup mode. In Manual mode, if you prefer, you can format your
USB storage device and specify the storage space that will be used for timeshift function. When the setup is
complete, the Disk Setup Result will be displayed. Press Exit button.
Timeshift function will not be available for radio broadcasts.
14.7. Disk format
When using a new USB storage device, it is recommended that you rst format it using the Format option in
the Record-> Device Info menu in Live TV mode. Highlight the connected device on the Device Info screen and
press OK or Right directional button to see the list of available options. Then highlight Format and press OK to
proceed. A conrmation dialogue will be displayed. Highlight Yes and press OK to start formatting.
IMPORTANT: Formatting your USB storage device will erase ALL the data on it and its le system will be converted
to FAT32. In most cases operation errors will be xed after a format but you will lose ALL your data.
14.8. Schedule list
You can add reminders or record timers using the Schedule List menu. You can access the Schedule List from
the Record menu in Live TV mode. Highlight Schedule List and press OK. Previously set timers will be listed if
any available.
Press Record button to add a timer while the Schedule List menu is displayed on the screen. You can dene the
type of the timer by setting the Schedule Type option as Reminder or Record. When other parameters are set
highlight Add and press OK. The timer will be added to the list.
If any available, you can also edit or delete the timers on this list. Highlight the timer of your choice and press
OK. Edit and Delete options will appear at the bottom of the screen. Highlight the desired option and press OK.
After you edited a timer you can choose either to replace it or add it as a new timer. If you choose the Replace
option, the timer will be saved with the new settings. If you choose the Add option, the timer will be added to
the list as a new timer. Highlight Replace or Add according to your preference and press OK to proceed. When
you choose to delete a timer a conrmation dialogue will be displayed on the screen. Highlight Yes and press
OK to delete the selected timer.
A warning message will be displayed if the time intervals of two timers overlap. You can not set more than one
timer for the same time interval.
Press EXIT button to close the Schedule List.
14.9. CEC
With CEC function of your TV you can operate a connected device with the TV remote control. This function uses
HDMI CEC (Consumer Electronics Control) to communicate with the connected devices. Devices must support
HDMI CEC and must be connected with an HDMI connection.
The TV comes with the CEC function switched on. Make sure that all CEC settings are properly set up on the
connected CEC device. The CEC functionality has dierent names on dierent brands. CEC function might not
work with all devices. If you connect a device with HDMI CEC support to your TV, the related HDMI input source
will be renamed with the connected device’s name.
To operate the connected CEC device, select the related HDMI input source from the Inputs menu on the Home
Screen. Or press the Source button if the TV is in Live TV mode and select the related HDMI input source from
the list. To terminate this operation and control the TV via the remote again, press the Source button, which will
still be functional, on the remote and switch to another source.
35


Need help? Post your question in this forum.

Forumrules


Report abuse

Libble takes abuse of its services very seriously. We're committed to dealing with such abuse according to the laws in your country of residence. When you submit a report, we'll investigate it and take the appropriate action. We'll get back to you only if we require additional details or have more information to share.

Product:

For example, Anti-Semitic content, racist content, or material that could result in a violent physical act.

For example, a credit card number, a personal identification number, or an unlisted home address. Note that email addresses and full names are not considered private information.

Forumrules

To achieve meaningful questions, we apply the following rules:

Register

Register getting emails for Nokia 4300D at:


You will receive an email to register for one or both of the options.


Get your user manual by e-mail

Enter your email address to receive the manual of Nokia 4300D in the language / languages: English as an attachment in your email.

The manual is 1.76 mb in size.

 

You will receive the manual in your email within minutes. If you have not received an email, then probably have entered the wrong email address or your mailbox is too full. In addition, it may be that your ISP may have a maximum size for emails to receive.

Others manual(s) of Nokia 4300D

Nokia 4300D User Manual - German - 45 pages


The manual is sent by email. Check your email

If you have not received an email with the manual within fifteen minutes, it may be that you have a entered a wrong email address or that your ISP has set a maximum size to receive email that is smaller than the size of the manual.

The email address you have provided is not correct.

Please check the email address and correct it.

Your question is posted on this page

Would you like to receive an email when new answers and questions are posted? Please enter your email address.



Info