493106
25
Zoom out
Zoom in
Previous page
1/31
Next page
25
APPENDICES
TROUBLESHOOTING
If you experience trouble with the projector, refer to
the following information. If the problem persists, please
contact your local reseller or service centre.
PROBLEM No image appears on the screen
Ensure all the cables and power connections are correctly and
securely connected as described in the “Installation” section.
Ensure the pins of connectors are not crooked or broken.
Check if the projection lamp has been securely installed.
Please refer to the “Replacing the lamp” section.
Make sure you have removed the lens cap and
the projector is switched on.
Ensure that the “Hide” feature is not enabled.
PROBLEM Partial, scrolling or incorrectly displayed image
Press the “Re-Sync” button on the Remote Control or the Control Panel.
If you use a PC:
If the resolution of your computer is higher than 1024 x 768.
Follow the steps outlined below to reset the resolution.
For Windows 3.x:
1
In the Windows Program Manager, click the
“Windows Setup” icon in the Main group.
2 Verify that your display resolution setting is
less than or equal to 1024 x 768.
For Windows 95,98,2000,XP:
1
Open “My Computer” icon, the “Control Panel” folder,
and then double click on the “Display” icon.
2 Select the “Setting” tab.
3 In the “Desktop Area” you will find the resolution setting. Verify that the
resolution setting is less than or equal to 1024 x 768 resolution.
If the projector is still not projecting the whole image, you will also need to
change the monitor display you are using. Refer to the following steps.
4 Follow the above steps 1-2. Click on the “Advanced Properties” button.
5 Select the “Change” button under the “Monitor” tab .
6 Click on “Show all devices”. Then select “Standard monitor
types” under the “Manufacturers” box ; choose the
resolution mode you need under the “Models” box.
7 Verify that the resolution setting of the monitor display is less
than or equal to 1024 x 768.
If you are using a Notebook PC:
1
You are required to implement the above steps of
resolution setting of the computer first.
2 Switch the Notebook PC display to the “external
display only” or “CRT only” mode.
If you experience difficulty in changing resolutions or your
monitor freezes, restart all the equipment and the projector.
25


Need help? Post your question in this forum.

Forumrules


Report abuse

Libble takes abuse of its services very seriously. We're committed to dealing with such abuse according to the laws in your country of residence. When you submit a report, we'll investigate it and take the appropriate action. We'll get back to you only if we require additional details or have more information to share.

Product:

For example, Anti-Semitic content, racist content, or material that could result in a violent physical act.

For example, a credit card number, a personal identification number, or an unlisted home address. Note that email addresses and full names are not considered private information.

Forumrules

To achieve meaningful questions, we apply the following rules:

Register

Register getting emails for Nobo X25M at:


You will receive an email to register for one or both of the options.


Get your user manual by e-mail

Enter your email address to receive the manual of Nobo X25M in the language / languages: English as an attachment in your email.

The manual is 0,95 mb in size.

 

You will receive the manual in your email within minutes. If you have not received an email, then probably have entered the wrong email address or your mailbox is too full. In addition, it may be that your ISP may have a maximum size for emails to receive.

The manual is sent by email. Check your email

If you have not received an email with the manual within fifteen minutes, it may be that you have a entered a wrong email address or that your ISP has set a maximum size to receive email that is smaller than the size of the manual.

The email address you have provided is not correct.

Please check the email address and correct it.

Your question is posted on this page

Would you like to receive an email when new answers and questions are posted? Please enter your email address.



Info