493103
12
Zoom out
Zoom in
Previous page
1/31
Next page
12
INST
ALLATION
POWERING OFF THE PROJECTOR
1 Press the “Power/Standby” button to turn off the projector lamp, you will see a
message “Power off the lamp? Picture Mute” displayed on the projector’s screen.
Pr
ess the “Power/Standby” button again to confirm, otherwise the message will
disappear after 5 seconds.
Please note that if the key is pressed instead, the projector will enter the
“Picture Mute” mode and no image will be displayed. To exit the “Picture Mute”
mode, press the “Power/Standby” button again.
2 The cooling fans continue to operate for about 60 seconds for cooling cycle and
the “Power/Standby” button will turn orange. When the light begins flashing, the
pr
ojector has entered standby mode.
If you wish to turn the projector back on, you must wait until the projector has
completed the cooling cycle and has entered standby mode. Once in standby
mode, simply press “Power/ Standby” button to restart the projector.
3 Disconnect the power cord from the electrical outlet and the projector.
4 Do not turn on the projector immediately following a power off procedure.
Warning Indicator
When the “LAMP” indicator lights solid r
ed, the pr
ojector
will automatically shut itself down. Please contact your local
reseller or service center.
When the “TEMP” indicator lights solid red for about 20
seconds, it indicates the pr
ojector has been overheated.
You will see a message “Projector Overheated. Lamp will
automatically turn off soon.” on the on-screen display. The
projector will automatically shut itself down. Under normal
conditions, the pr
ojector can be switched on again after it
has cooled down. If the problem persists, you should
contact your local dealer or our service centre.
When the “TEMP” indicator flashs red for about 10
seconds, you will see a message “Fan fail. Lamp will
automatically turn off soon” on the on-screen display.
Please contact your local dealer or our service centre.
12


Need help? Post your question in this forum.

Forumrules


Report abuse

Libble takes abuse of its services very seriously. We're committed to dealing with such abuse according to the laws in your country of residence. When you submit a report, we'll investigate it and take the appropriate action. We'll get back to you only if we require additional details or have more information to share.

Product:

For example, Anti-Semitic content, racist content, or material that could result in a violent physical act.

For example, a credit card number, a personal identification number, or an unlisted home address. Note that email addresses and full names are not considered private information.

Forumrules

To achieve meaningful questions, we apply the following rules:

Register

Register getting emails for Nobo X23M at:


You will receive an email to register for one or both of the options.


Get your user manual by e-mail

Enter your email address to receive the manual of Nobo X23M in the language / languages: English as an attachment in your email.

The manual is 2,09 mb in size.

 

You will receive the manual in your email within minutes. If you have not received an email, then probably have entered the wrong email address or your mailbox is too full. In addition, it may be that your ISP may have a maximum size for emails to receive.

The manual is sent by email. Check your email

If you have not received an email with the manual within fifteen minutes, it may be that you have a entered a wrong email address or that your ISP has set a maximum size to receive email that is smaller than the size of the manual.

The email address you have provided is not correct.

Please check the email address and correct it.

Your question is posted on this page

Would you like to receive an email when new answers and questions are posted? Please enter your email address.



Info