Manual Nobo X20M (page 4 of 28) (English)

493102

Zoom out

Zoom in

1/28

USAGE NOTICE

PRECAUTIONS

Follow all warnings, precautions and maintenance as recommended in this

User’s Guide to maximise the life of your unit.

■ Turn off the product before cleaning

■ Use a soft cloth moistened with mild detergent to clean the display housing

■ Disconnect the power plug from AC outlet if the product is not being used

for a long period of time

DON’T

■ Block the slots and opening on the unit provided for ventilation

■ Use abrasive cleaners, waxes or solvents to clean the unit

■ Use under the following conditions:

■ Extremely hot, cold or humid conditions

■ In areas susceptible to excessive dust and dirt

■ Near any appliance generating a strong magnetic field

■ Place in direct sunlight

Do not look into the lens. The bright light may hurt your eyes.

To reduce the risk of fire or electric shock, do not expose the product to rain or moisture.

Please do not open or disassemble the product as this may cause electric shock.

When changing the lamp, please allow unit to cool down, and follow all changing instructions.

This product will detect the life of the lamp itself. Please be sure to change the lamp when it

shows the warning messages.

After changing a new lamp. please reset the lamp life from OSD menu.

Before switching off the product, please keep the cooling fan running for a few minutes.

When connecting the projector to computer, please turn on the projector first.

To reduce the risk of injury to the eyes, do not look directly into the laser light on the

remote control and do not point the laser light into anyone’s eyes. This remote control is

equipped with a Class II laser that emits radiation.

When the lamp reaches the end of its life, it will burn out and may make a loud popping

sound. If this happens, the projector will not turn back on until the lamp module has been

replaced. To replace the lamp, follow the procedures listed under Changing the lamp on

page 26.

WARNING

Report abuse

Libble takes abuse of its services very seriously. We're committed to dealing with such abuse according to the laws in your country of residence. When you submit a report, we'll investigate it and take the appropriate action. We'll get back to you only if we require additional details or have more information to share.

Product:

Forumrules

To achieve meaningful questions, we apply the following rules:

First, read the manual;
Check if your question has been asked previously;
Try to ask your question as clearly as possible;
Did you already try to solve the problem? Please mention this;
Is your problem solved by a visitor then let him/her know in this forum;
To give a response to a question or answer, do not use this form but click on the button 'reply to this question';
Your question will be posted here and emailed to our subscribers. Therefore, avoid filling in personal details.

new questions and answers
new manuals

You will receive an email to register for one or both of the options.

Get your user manual by e-mail

Enter your email address to receive the manual of Nobo X20M in the language / languages: English as an attachment in your email.

The manual is 2,02 mb in size.

You will receive the manual in your email within minutes. If you have not received an email, then probably have entered the wrong email address or your mailbox is too full. In addition, it may be that your ISP may have a maximum size for emails to receive.

The manual is sent by email. Check your email

If you have not received an email with the manual within fifteen minutes, it may be that you have a entered a wrong email address or that your ISP has set a maximum size to receive email that is smaller than the size of the manual.

The email address you have provided is not correct.

Please check the email address and correct it.

Your question is posted on this page

Would you like to receive an email when new answers and questions are posted? Please enter your email address.

Info

Nobo X20M Manual

Product: