774459
7
Zoom out
Zoom in
Previous page
1/16
Next page
3. Setting/adjusting basic settings
Note: The machine has a pre-programmed setting ex-factory for each coffee variety. This means that
you can brew your rst coffee straightaway (see 4.). However, we do recommend making the necessary
adjustments according to your preferences before you do so.
To adjust the basic settings turn the rotary control to “SETTINGS” in the main menu.
Enter the “SETTINGS” menu by pressing the rotary control.
Select the menu item that you want to adjust by turning the rotary control.
Enter the chosen menu item by pressing the rotary control.
Turning the rotary control adjusts the setting.
Press the rotary control to conrm the selected setting.
By pressing the exit button you move up one menu level: from the selected setting to
“SETTINGS” to the main menu.
3.1. Setting the appliance for use with or without lter
To adjust the mode turn the rotary control in the main menu to “SETTINGS”.
Press the rotary control to enter the “SETTINGS” menu.
Turn the rotary control to “FILTER”.
Using the appliance with lter: please follow the procedure in 2.4.1.
Using the appliance without lter: please follow the procedure in 2.4.2.
You can adjust the other settings directly from here or leave the menu using the exit button.
3.2. Setting water hardness level
To adjust the water hardness turn the rotary control in the main menu to the “SETTINGS” menu.
Enter “Settings” by pressing the rotary control.
Select the menu item “WATER HARDNESS” by turning the rotary control
Then follow the procedure in 2.4.3
You can adjust the other settings directly from here or leave the menu using the exit button.
3.3. Adjusting the temperature
You can adjust the temperature as required to “NORMAL”, “HIGH”, “MAXIMUM” or “INDIVIDUAL”.
The ex-factory setting is “HIGH”. If the temperature has been adjusted as outlined below this applies
to all coffee varieties.
You can however set the temperature for each coffee variety as “INDIVIDUAL” (see 4. below.) Adjust
the temperature settings in the “INDIVIDUAL” menu as follows:
Turn the rotary control in the main menu to “SETTINGS” and press it.
Turn the rotary control to “TEMPERATURE” and press it.
Turn the rotary control to nd your preferred temperature.
Press the rotary control to conrm your setting.
The display now shows all other settings.
You can adjust the other settings directly from here or leave the menu using the exit button.
3.4. Adjusting the aroma
You can select the aroma settings for your coffee according to taste. The menu setting “AROMA“ has
three pre-set proles stored. Prole 1 “DYNAMIC” for a dynamic water ow, prole 2 “CONSTANT”
for a constant water ow and prole 3 “INTENSE” for a strong water ow. The ex-factory setting is
“INDIVIDUAL”, which means you can individually select the aroma setting for each coffee recipe.
But if you select prole 1, 2 or 3 here, this setting will then be applied to all coffee specialities.
Tip: Make a coffee and try your preferred aroma prole.
To change the aroma setting turn the rotary in the main menu to “SETTINGS” and press.
Turn the rotary to „AROMA“ and press.
Turn the rotary to the aroma prole of your choice.
Press the rotary to conrm your setting.
From here you can change all other settings directly or return to the main menu by selecting
“EXIT“ and then pressing the rotary to conrm.
3.5. Select language
To change the language turn the rotary control in the main menu to “SETTINGS”.
Press the rotary control to enter “SETTINGS”.
In “SETTINGS” turn the rotary control to “LANGUAGE”.
Press the rotary control.
By turning the rotary control you change the language.
Press the rotary control to conrm the chosen language.
You can adjust the other settings directly from here or leave the menu using the exit button.
3.6. Adjusting the times
3.6.1. Set automatic switch-off time
This function allows you to determine the automatic switch-off time after the last use. The ex-factory
setting is after “10 MINUTES”.
Turn the rotary control to “SETTINGS” and press it.
Turn the rotary control to “TIMES” and press it.
Press the rotary control to conrm your choice.
The display shows the available switch-off times.
Turn the rotary control to set the required switch-off time.
Drücken Sie den Rotary zur Bestätigung Ihrer Einstellung.
The display shows the other time settings. Your appliance will now automatically shut down after use
according to the switch-off time.
You can adjust the other time settings directly from here or leave the menu using the exit button.
3.6.2. Set automatic switch-on time
Your appliance can be set to automatically switch on at a required time; e.g. to be up and running in
time for breakfast. How to set the switch-on time:
Turn the rotary control to “SETTINGS” and press it.
Turn the rotary control to “TIMES” and press it.
Turn the rotary control to “APPLIANCE AUTO-ON” and press it.
Turn the rotary control to “AUTO-ON SETTINGS” and press it.
The display shows the current time of day.
Turn the rotary control to the actual hour and press it.
Turn the rotary control to the actual minute and press it.
The time of day is set. The display shows the automatic switch-on time.
Attention: If the appliance has been taken off the mains or a power cut occurred, the time has to be
re-set to use the automatic switch-on time facility.
Once the time has been set, the display shows “APPLIANCE AUTO-ON HOURS”. Set the automatic
switch-on time as follows:
Turn the rotary control to the hour of the automatic switch-on time and and press it.
Turn the rotary control to the minute of the automatic switch-on time and press it.
The automatic switch-on time is now set and shown in the display.
If necessary press the exit button several times to leave the time menu.
72 73
3. Setting/adjusting basic settings 3. Setting/adjusting basic settings
7


Need help? Post your question in this forum.

Forumrules


Report abuse

Libble takes abuse of its services very seriously. We're committed to dealing with such abuse according to the laws in your country of residence. When you submit a report, we'll investigate it and take the appropriate action. We'll get back to you only if we require additional details or have more information to share.

Product:

For example, Anti-Semitic content, racist content, or material that could result in a violent physical act.

For example, a credit card number, a personal identification number, or an unlisted home address. Note that email addresses and full names are not considered private information.

Forumrules

To achieve meaningful questions, we apply the following rules:

Register

Register getting emails for Nivona NICR821 at:


You will receive an email to register for one or both of the options.


Get your user manual by e-mail

Enter your email address to receive the manual of Nivona NICR821 in the language / languages: English as an attachment in your email.

The manual is 0.92 mb in size.

 

You will receive the manual in your email within minutes. If you have not received an email, then probably have entered the wrong email address or your mailbox is too full. In addition, it may be that your ISP may have a maximum size for emails to receive.

Others manual(s) of Nivona NICR821

Nivona NICR821 User Manual - German - 34 pages

Nivona NICR821 User Manual - Dutch - 33 pages

Nivona NICR821 User Manual - French - 34 pages


The manual is sent by email. Check your email

If you have not received an email with the manual within fifteen minutes, it may be that you have a entered a wrong email address or that your ISP has set a maximum size to receive email that is smaller than the size of the manual.

The email address you have provided is not correct.

Please check the email address and correct it.

Your question is posted on this page

Would you like to receive an email when new answers and questions are posted? Please enter your email address.



Info