774464
9
Zoom out
Zoom in
Previous page
1/38
Next page
Information: The appliance should be posted in its complete original packaging in case of a customer
support service. Please keep the packaging including the polystyrene parts in full.
Put the appliance onto an even, dry and appropriate work surface.
Connect it to a professionally installed socket.
Your appliance has a cable compartment - you can push the cable length which is not required
into the compartment on the back, should the lead be too long (picture 1/T).
2.2. The most important control elements
Your NIVONA appliance offers you diverse possibilities to prepare speciality coffees to your individual
wishes. The most important control elements and their basic function are mostly identical for the
different coffee specialities:
On/Off switch (picture 1/H): By pressing you turn the appliance on, by pressing once more you
turn it off again.
Rotary - Turn -Press - Selector (short Rotary) (picture 1/B): Select your favourite beverage in the main
menu by turning the rotary. By pressing the rotary in the main menu, the beverage preparation
starts. During the preparation of the beverage, you can alter the strength and amount of your
coffee with the rotary. The changeable value ashes respectively.
Steam-Hot water-Rotary knob (picture 1/C): When the display shows “OPEN VENT’’, place a container
underneath the steam-hot water jet / the spumatore prior to use. You open the vent for the hot
water or steam supply, by turning it clockwise up to the stop. You stop the supply, by turning it
anticlockwise up to the stop.
Steam-Hot water Jet/Spumatore (picture 1/P): Is the tap of the spumatore upright with open steam-hot
water rotary knob (picture 1/C), foamed milk or hot water are made depending on the choice of
beverage. The milk tube is rinsed, when the tap of the spumatore is horizontal with open steam-hot
water rotary knob (picture 1/C).
Height-adjustable spout (picture 1/E): By moving up or down, you adjust the spout to the height
of your cups or glasses. Grab the spout between thumb and index nger and move it up or down
(picture 11).
Milk container (only designs 670 and 680): Fill the milk container with fresh, cold, low fat milk.
Close the lid of the milk container and connect the suction tube with one end to the milk container
and with the other end to the milk frother/spumatore.
2.3. Filling of water and beans
Open the cover on the left side of the device (picture 1/F) and remove the water tank (picture 2).
Rinse it with cold, clear tab water.
Fill the water tank above the minimal mark (0,5 l) and put it back into the appliance. Ensure that
the water tank ts properly when inserting it.
Close the cover on the left side of the device again.
Warning: Always ll the water tank with clear, cold water only! Never use carbonated water or different
uids! Nonobservance will void you guarantee claims.
Open the lid of the bean container (picture 1/G and 3).
Fill it with untreated, roasted coffee beans only.
Close the lid again. Ensure the proper t.
7
2. Set up
9


Need help? Post your question in this forum.

Forumrules


Report abuse

Libble takes abuse of its services very seriously. We're committed to dealing with such abuse according to the laws in your country of residence. When you submit a report, we'll investigate it and take the appropriate action. We'll get back to you only if we require additional details or have more information to share.

Product:

For example, Anti-Semitic content, racist content, or material that could result in a violent physical act.

For example, a credit card number, a personal identification number, or an unlisted home address. Note that email addresses and full names are not considered private information.

Forumrules

To achieve meaningful questions, we apply the following rules:

Register

Register getting emails for Nivona NICR670 at:


You will receive an email to register for one or both of the options.


Get your user manual by e-mail

Enter your email address to receive the manual of Nivona NICR670 in the language / languages: English as an attachment in your email.

The manual is 7.97 mb in size.

 

You will receive the manual in your email within minutes. If you have not received an email, then probably have entered the wrong email address or your mailbox is too full. In addition, it may be that your ISP may have a maximum size for emails to receive.

Others manual(s) of Nivona NICR670

Nivona NICR670 User Manual - German - 38 pages

Nivona NICR670 User Manual - Dutch - 38 pages

Nivona NICR670 User Manual - French - 39 pages


The manual is sent by email. Check your email

If you have not received an email with the manual within fifteen minutes, it may be that you have a entered a wrong email address or that your ISP has set a maximum size to receive email that is smaller than the size of the manual.

The email address you have provided is not correct.

Please check the email address and correct it.

Your question is posted on this page

Would you like to receive an email when new answers and questions are posted? Please enter your email address.



Info