Turn the rotary control in the main menu to “SETTINGS” and press it.
Turn the rotary control to “CUP HEATING” and press it.
Turn the rotary control to “AUTO-ON” and press it.
The display shows the other settings.
You can adjust the other time settings directly here or leave the menu using the exit button.
Note: If AUTO-on is set, the cup heating starts 30 minutes before the appliance starts.
How to switch the automatic cup heat off:
Turn the rotary control to “SETTINGS” and press it.
Turn the rotary control to “CUP HEATING” and press it.
Turn the rotary control to “MANUALLY ONLY” and press it.
The automatic switch-on is now turned off.
Return to the main menu with the exit button.
3.7. Setting switch-off rinsing process
Ex-factory the automatic switch-on rinsing function is permanently installed. Every time the appli-
ance is switched on after an inactive state, it will heat the water up and ask for a rinse to ensure that
fresh water is always used. This request is shown in the display and needs to be started manually by
pressing the rotary control.
Ex-factory the switch-off rinsing is set on “ON”.
Optionally the automatic switch-off rinsing function can be deactivated after the appliance has been
switched off:
Turn the rotary control to “SETTINGS” and press it.
Turn the rotary control to “SWITCH-OFF RINSING” and press it.
Turn the rotary control to “ON” or “OFF” and press it.
The display shows the other optional settings.
You can adjust the other time settings directly here or leave the menu using the exit button.
Note: Even if the switch-off rinse is set on “ON”, it will only be executed if at least one drink has been
prepared.
3.8. Reset to factory settings
All changes made in the settings 3.1. to 3.7. and all recipes (see 4.) can be reset to the factory settings.
Turn the rotary control to “SETTINGS” and press it.
Turn the rotary control to “FACTORY SETTINGS” and press it.
Turn the rotary control to “RESET RECIPES” or “RESET SETTINGS”.
Press the rotary control to conrm.
The display shows the other optional settings.
You can adjust the other time settings directly here or leave the menu using the exit button.
3.9. View statistics
The menu item “STATISTICS” details how many drinks and functions have been prepared/used set
since the appliance’s initial startup.
Turn the rotary control to “SETTINGS” and press it.
Turn the rotary control to “STATISTICS” and press it.
Turn the rotary control to view the statistics available.
To close press the rotary control.
The display shows the other settings.
You can adjust the other time settings directly here or leave the menu using the exit button.
4. Preparing coffee varieties
Your NIVONA appliance offers a variety of options to prepare coffee according to your individual
taste. The most important control elements and their basic functions are generally identical:
• Rotary control (g. 1/B): By turning the rotary control the setting is changed. Pressing the rotary
control conrms the chosen setting.
• Button > (g. 1/C): By pressing the button > you will move forward to the next menu item.
• Exit button (g. 1/D): By pressing the exit button you will leave the menu and go back one menu
item. If a drink is already being prepared, the process will be stopped.
• Height adjustable spout (g. 1/B): By pushing it up or down you can adjust the drain to the height
of your cups or glasses.
The selected coffee variety is shown in the display with a symbol and in cleartext, e.g. “ESPRESSO”.
By turning the rotary control you select the required coffee variety.
Note: The display shows the chosen coffee variety’s current settings below the bar in the bottom line.
Each coffee variety can be made in two separate ways:
a) Either you change the personal setting for each coffee individually as outlined in 4.1. In this case
the standard settings are preserved.
b) Or you adopt the standard settings from “DRINKS RECIPES” in the “SETTINGS” menu. Pre-
settings have been recorded ex-factory; outlined from 4.2. to 4.5. you can adjust them in line with
your personal preference.
The rst cup: When making your rst coffee, the grinder box is still empty. It can therefore happen
that the display will show “FILL BEANS” after the rst grinding and the appliance will not make any
coffee.
Follow the instructions on the display and press the rotary control again.
The process will be repeated.
Special requirements when preparing two cups (model 848 and 858):
To brew two cups one directly after the other press the rotary control twice in quick succession to
start the process.
When brewing two cups at the same time, the grinder will automatically do two rounds. In case there
is not enough water, the bean container runs empty or the trays need emptying during the two grind-
ing cycles, the respective symbols will show on the display. In that case the second cup will not be
brewed.
Follow the display and press the rotary control only once for the second cup.
4.1. Preparing individual drinks each time
Regardless of the standard setting in the menu item “SETTINGS”, “DRINKS RECIPES” each brewing
process can be customised.
Turn the rotary control in the main menu to your preferred drink option (e.g. “LATTE MACCHIA-
TO”).
Press button > (g. 1/C) until the blinking bean symbol indicates that you can change the aroma.
While the symbol is blinking, turn the rotary control onto the requested setting.
Do you want to change other parameters like the quantity or the number of cups?
Press button > (g. 1/C) until the requested setting appears.
Während das Symbol blinkt, drehen Sie den Rotary auf Ihre gewünschte Einstellung.
The new settings are stored when you press the exit button or if you do not carry out any further
changes.
Note: Be mindful if you brew one or two cups and place the cups accordingly under the spout (g. 5 and 6).
44 45
3. Setting/adjusting basic settings 4. Preparing coffee varieties
