717600
13
Zoom out
Zoom in
Previous page
1/16
Next page
HOSE”.
After a short while the display shows “CONNECT HOSE TO SPOUT AND DRIP TRAY”.
Connect the hose to the spout (g. 7) and the other end to the drip tray (g. 10).
Press the rotary control.
The display shows “CLEANING FROTHER, DO NOT REMOVE HOSE”.
Once the cleaning cycle is nished, the appliance starts heating up and is again ready for use.is
complete.
Empty the drip tray and used coffee container (g. 1/N and 1/O) and re-insert them cleaned.
The display shows the main menu.
5.4. System cleaning
Note: If the appliance needs cleaning, the display will show “PLEASE CLEAN SYSTEM”. You can continue
making coffee, but we recommend starting the cleaning program as soon as possible. Otherwise the func-
tion might be impaired and your warranty could be compromised.
Attention: Do not disrupt the cleaning process. Insert cleaning tab only if the appliance asks for it.
Turn the rotary control to “MAINTENANCE” and press it.
Turn the rotary control to “CLEAN SYSTEM” and press it.
The display shows “EMPTY TRAYS” and “FILL WATER” alternatingly.
Remove drip tray and used coffee container (g. 1/N and 1/O) and empty both.
If necessary rell the water tank with fresh water. Reinsert the water tank rst, followed by drip
tray and used coffee container.
The appliance rinses twice and the display shows “CLEANING SYSTEM”.
The display shows “CLEANING TAB IN GROUND COFFEE CHUTE”.
Place a sufciently large bowl (minimum contents 0.5 l) under the spout (g. 1/E).
Open the lid on the right hand side of the appliance (g. 1/G).
Open the lid of coffee powder chute (g. 1/M).
Place a cleaning tab in the chute and close both lids.
The display shows “START CLEANING”.
Press the rotary control to conrm.
The appliance starts the cleaning process. The display shows “CLEANING SYSTEM”. The fully auto-
mated process takes approximately 10 minutes.
Note: Should a message appear during the cleaning process, follow the indicated steps. The appliance
will continue with the cleaning automatically afterwards.
Once the process is nished, the display shows “EMPTY TRAYS“
Remove drip tray with used coffee container (g. 1/N and 1/O), empty both and reinsert them.
If necessary rell the water tank with fresh water. Reinsert the water tank rst, followed by drip
tray and used coffee container.
The appliance rinses, reheats and is ready for use after that. The display shows the main menu.
5.5. Descaling
If the appliance needs descaling, the display shows “PLEASE DESCALE SYSTEM”.
You can also start the descaling programme any time manually.
Attention: Please make sure to follow each step exactly as outlined below! You can continue making
coffee, but we recommend starting the descaling program as soon as possible. Otherwise the function
might be impaired and your warranty could be compromised.
Attention: Do not disrupt the descaling program. Never use vinegar or vinegar-based agents, only
standard liquid products specically recommended for automatic coffee machines.
Attention: Before starting the descaling program remove the lter from the water tank.
Turn the rotary control to “MAINTENANCE” and press it.
Turn the rotary control to “DESCALING SYSTEM” and press to conrm.
The display shows “EMPTY TRAYS”.
Remove drip tray with used coffee container (g. 1/N and 1/O), and empty both.
Reinsert drip tray and used coffee container.
The display shows “REMOVE WATER TANK”.
Remove the water tank
The display shows “FILL WATER TANK TO 0,5l MARK” and “INSERT DESCALER TO TANK” alternat-
ingly.
Remove the lter. Fill the water tank to the 0,5 l mark with fresh water and reinsert it.
Attention: Always add the water rst to the 0,5 l mark and then the descaling agent. Never vice versa!
Please follow the manufacturer’s advice how to use the descaler.
Only now add the descaler.
The display shows “CONNECT HOSE TO SPOUT AND DRIP TRAY”.
Connect one end of the hose to the spout (g. 7).
Connect the other end to the drip tray (g. 10).
Press the rotary control.
The display shows “START DESCALING”.
Place a sufciently large bowl (minimum contents 0.5 l) under the spout (g. 1/E).
Press the rotary control.
The descaling process starts. The display shows “SYSTEM DESCALING”. The descaling process is
automatic and takes approximately 30 minutes. The descaling solution is transported through the
system in intervals.
Once the cycle is completed, the display shows “EMPTY TRAYS”.
Remove drip tray with used coffee container (g. 1/N and 1/O) and empty both.
Reinsert drip tray and used coffee container.
Remove water tank and rinse it with fresh water.
Reinsert lter in the water tank if required.
Fill the water tank with fresh water and reinsert it.
The display shows “CONNECT HOSE TO SPOUT AND DRIP TRAY”.
Connect the hose with one end to the spout (g. 7).
Connect the other end to the drip tray (g. 10).
Place a sufciently large bowl (about 0.5 l) under the spout.
Press the rotary control.
The display shows “PLEASE RINSE”.
Press the rotary control to start rinsing process.
The display shows “SYSTEM RINSING, DO NOT REMOVE HOSE”. The automatic cleaning process
is started that lasts for approximately two minutes. Once the cycle is nished, the display shows
“EMPTY TRAYS”.
Empty drip tray and used coffee container (g. 1/N and 1/O) and reinsert both.
The appliance reheats and is ready for use. The display shows the main menu.
84 85
5. Cleaning and maintenances 5. Cleaning and maintenance
13


Need help? Post your question in this forum.

Forumrules


Report abuse

Libble takes abuse of its services very seriously. We're committed to dealing with such abuse according to the laws in your country of residence. When you submit a report, we'll investigate it and take the appropriate action. We'll get back to you only if we require additional details or have more information to share.

Product:

For example, Anti-Semitic content, racist content, or material that could result in a violent physical act.

For example, a credit card number, a personal identification number, or an unlisted home address. Note that email addresses and full names are not considered private information.

Forumrules

To achieve meaningful questions, we apply the following rules:

Register

Register getting emails for Nivona CafeRomatica 841 at:


You will receive an email to register for one or both of the options.


Get your user manual by e-mail

Enter your email address to receive the manual of Nivona CafeRomatica 841 in the language / languages: English as an attachment in your email.

The manual is 0,92 mb in size.

 

You will receive the manual in your email within minutes. If you have not received an email, then probably have entered the wrong email address or your mailbox is too full. In addition, it may be that your ISP may have a maximum size for emails to receive.

Others manual(s) of Nivona CafeRomatica 841

Nivona CafeRomatica 841 User Manual - German - 17 pages

Nivona CafeRomatica 841 User Manual - Dutch - 17 pages

Nivona CafeRomatica 841 User Manual - French - 17 pages


The manual is sent by email. Check your email

If you have not received an email with the manual within fifteen minutes, it may be that you have a entered a wrong email address or that your ISP has set a maximum size to receive email that is smaller than the size of the manual.

The email address you have provided is not correct.

Please check the email address and correct it.

Your question is posted on this page

Would you like to receive an email when new answers and questions are posted? Please enter your email address.



Info