634293
7
Zoom out
Zoom in
Previous page
1/29
Next page
Please note: If no red dot appears, set water hardness to level 1.
Set the water hardness level on your machine as follows:
! Turn the Rotary control knob to select the appropriate water hard-
ness level.
! Press the Rotary control knob to conrm your selection.
The message, “Please rinse”, will now appear on the display screen.
! Press the Rotary control knob.
The system will now be lled with water.
The message, “NIVONA”, will now appear on the display screen.
When the machine has heated up, the main menu will appear on the
display screen to indicate that the machine is ready for use.
The rst time you brew a coffee: The rst time you brew a coffee, the
grinder is still empty. So after the rst grinding, the display screen
may show the message, “Fill up beans”, and the machine may not
brew any coffee.
! Follow the message on the display screen and simply press the
Rotary control knob again.
The process will then be repeated.
2.5 Switching on the machine and preparing it for use
After you have set up the machine (see 2.4), always switch it on and
prepare it for use as follows:
! Switch on the machine at the mains (Image 1/H).
! Press the on/off button (Image 1/I).
The message, “Heating” will now appear on the display screen.
Once the machine has heated up, the message, “Please rinse”, will
appear on the display screen.
! Press the Rotary control knob.
The system will now be rinsed. Then it will be ready for use, and the
main menu will appear on the display screen (Image 1/A).
Please note: If you are not going to use the machine for a signicant
period of time (e.g., if you are going on holiday), switch off the machine
at the mains (Image 1/H) and remove the plug from the mains.
2.6 Pre-warming your cups
850 model only: Your machine is equipped with a high-quality active
cup-warming function that can be switched on and off while the
machine is on.
! By pressing the button (Image 1/K) you can turn on the cup-warm-
ing function. (The mains switch (Image 1/H) must be on.)
The display screen will show the message, “Cup heater on”.
! By pressing the button again (Image 1/K) you can turn the cup-
warming function off again.
The display screen will show the message, “Cup heater off”.
Tip: Use the warming function to optimise the temperature and aroma of
your coffee to suit your personal preference.
3. Adjusting the basic settings
Please note: There is a factory setting for every speciality coffee. So you
can brew coffee straight away (see 4). But we would advise you to start
by changing the basic settings to match your own preferences. So please
adjust the following basic settings (3.1 to 3.8).
3.1. Operating the machine with or without the lter
3.1.1 Operating the machine with the lter
A Claris lter is one of the accessories that come with the machine.
If you use this lter properly, you will have to descale your machine
less often, as the lter softens the water. The machine’s default fac-
tory setting is “Insert lter? No”.
! Turn the Rotary control knob to the tool symbol, „settings“. Press
the Rotary control knob.
! Turn the Rotary control knob to “Filter”. Press the Rotary control
knob.
! Turn the Rotary control knob to “Insert lter? Yes”, so that the
machine knows that the lter is being inserted.
! Press the Rotary control knob. The message, “Insert lter”, will
appear on the display screen.
!"#$%
&'()*''+
68
69
2. Set up 2. Set up / 3. Adjusting the basic settings
7


Need help? Post your question in this forum.

Forumrules


Report abuse

Libble takes abuse of its services very seriously. We're committed to dealing with such abuse according to the laws in your country of residence. When you submit a report, we'll investigate it and take the appropriate action. We'll get back to you only if we require additional details or have more information to share.

Product:

For example, Anti-Semitic content, racist content, or material that could result in a violent physical act.

For example, a credit card number, a personal identification number, or an unlisted home address. Note that email addresses and full names are not considered private information.

Forumrules

To achieve meaningful questions, we apply the following rules:

Register

Register getting emails for Nivona CafeRomatica 840 at:


You will receive an email to register for one or both of the options.


Get your user manual by e-mail

Enter your email address to receive the manual of Nivona CafeRomatica 840 in the language / languages: English as an attachment in your email.

The manual is 1,59 mb in size.

 

You will receive the manual in your email within minutes. If you have not received an email, then probably have entered the wrong email address or your mailbox is too full. In addition, it may be that your ISP may have a maximum size for emails to receive.

Others manual(s) of Nivona CafeRomatica 840

Nivona CafeRomatica 840 User Manual - German - 30 pages

Nivona CafeRomatica 840 User Manual - Dutch - 30 pages

Nivona CafeRomatica 840 User Manual - French - 40 pages


The manual is sent by email. Check your email

If you have not received an email with the manual within fifteen minutes, it may be that you have a entered a wrong email address or that your ISP has set a maximum size to receive email that is smaller than the size of the manual.

The email address you have provided is not correct.

Please check the email address and correct it.

Your question is posted on this page

Would you like to receive an email when new answers and questions are posted? Please enter your email address.



Info