717614
10
Zoom out
Zoom in
Previous page
1/16
Next page
If you want to stop the process, press the right rotary again.
The display shows “ABORTED”. The appliance stops the process and returns to main menu.
The standard setting can be altered in two different ways:
4.3.1. Live programming
You can change and save the standard setting during the brewing process as follows.
Turn the right rotary control in the main menu to “SETTINGS” and press it.
Turn the right rotary control to “DRINK RECIPES” and press it.
Turn the right rotary control to the drink of your choice (e.g. “LATTE MACCHIATO”) and press it.
Turn the right rotary control to “LIVE PROGRAMMING”.
To change the standard setting, now press the right rotary control.
Cappuccino and Latte Macchiato:
The display shows “SELECT STRENGTH”.
Turn the left rotary control to select the strength of your choice (left for weaker, right for stronger
coffee).
Press the right rotary control to conrm your choice of strength.
The display shows “SELECT AROMA”.
Turn the left rotary control to select the aroma of your choice (see 3.3.).
Press the right rotary control to conrm your aroma choice.
The display shows “PLEASE WAIT”. The appliance heats up and will start the preparation.
Latte Macchiato and warm milk:
The milk will be prepared rst.
The display shows “STOP MILK?”
Press the right rotary control when the required amount of milk is reached.
All drinks with milk:
The froth is made next.
The display shows “STOP FROTH?”
Press the right rotary control when the required quantity of froth is reached.
Cappuccino and Latte Macchiato:
Finally the coffee is brewed.
The display shows “STOP COFFEE?”
Press the right rotary control when the required quantity of coffee is reached.
The standard setting for the drink of your choice (e.g. Latte Macchiato) has now been altered and
saved. The display shows “RECIPE SAVED” for a short time and will then switch back to the main
menu with the new standard settings.
4.3.2. Manual programming
You can also change the standard settings manually as follows.
Turn the right rotary control in the main menu to “SETTINGS” and press it.
Turn the right rotary control to “DRINK RECIPES” and press it.
Turn the right rotary control to the drink of your choice (e.g. “LATTE MACCHIATO”) and press it.
Select strength (Cappuccino and Latte Macchiato)
Turn the right rotary control to “STRENGTH” and press it.
Turn the right rotary control to select the strength of your choice (left for weaker, right for stronger
coffee). Press the right rotary control to conrm the setting.
Select aroma (Cappuccino and Latte Macchiato)
Turn the right rotary control to “AROMA” and press it.
Turn the right rotary control to select the aroma of your choice (see 3.3. for information about the
aroma proles). Press the right rotary control to conrm the setting.
Select coffee quantity (Cappuccino and Latte Macchiato)
Turn the right rotary control to “COFFEE QUANTITY” and press it.
Turn the right rotary control to select the quantity of your choice and press it.
Note: Make sure that your cups or glasses t.
Select milk quantity (Latte Macchiato and warm milk)
Turn the right rotary control to “MILK QUANTITY” and press it.
Turn the right rotary control to select the quantity of your choice and press it.
Note: Make sure that your cups or glasses t.
Select froth quantity (Cappuccino, Latte Macchiato, warm milk)
Turn the right rotary control to “FROTH QUANTITY” and press it.
Turn the right rotary control to select the quantity of your choice and press it.
Note: Make sure that your cups or glasses t.
Select total quantity (all drinks with milk).
Note: By changing this setting all previous settings will be adjusted accordingly. This way the relation
of all drinks components (milk, coffee, froth) remains identical even if the volume changes.
Turn the right rotary control to “TOTAL QUANTITY” and press it.
Turn the right rotary control to the quantity of your choice. Press the right rotary control to con-
rm your setting.
Note: Make sure that your cups or glasses t.
Select temperature (if “TEMPERATURE”, see 3.4., “INDIVIDUAL” is set in the menu “SETTINGS”)
Turn the right rotary control to “TEMPERATURE” and press it.
Turn the right rotary control to the temperature of your choice (STANDARD, HIGH, MAXIMUM)
and press it to conrm the setting.
To exit a menu level turn the right rotary control in each level to “EXIT”. Then press the right
rotary control. Or press the left rotary to go back one menu level.
Repeat this until you are back in the main menu.
Note: If no changes are made to the settings for some time, the appliance switches back to the main
menu automatically.
4.4. Adjusting standard settings for hot water (e.g. tea)
Ex-factory the standard setting for hot water is 150ml.
The display shows: “150ml”
Place a cup underneath the spout (g. 5).
Turn the right rotary control to “HOT WATER” and press it.
The cup light switches on (not model 759). The appliance prepares hot water in the standard setting.
The standard setting can be altered in two different ways:
4.4.1. Live programming
You can change and save the standard setting during the brewing process as follows.
Turn the right rotary control in the main menu to “SETTINGS” and then press it.
Turn the right rotary control to “DRINK RECIPES” and press it.
Turn the right rotary control to “HOT Water” and press it.
78 79
4. Preparing coffee specialities 4. Preparing coffee specialities
10


Need help? Post your question in this forum.

Forumrules


Report abuse

Libble takes abuse of its services very seriously. We're committed to dealing with such abuse according to the laws in your country of residence. When you submit a report, we'll investigate it and take the appropriate action. We'll get back to you only if we require additional details or have more information to share.

Product:

For example, Anti-Semitic content, racist content, or material that could result in a violent physical act.

For example, a credit card number, a personal identification number, or an unlisted home address. Note that email addresses and full names are not considered private information.

Forumrules

To achieve meaningful questions, we apply the following rules:

Register

Register getting emails for Nivona CafeRomatica 789 at:


You will receive an email to register for one or both of the options.


Get your user manual by e-mail

Enter your email address to receive the manual of Nivona CafeRomatica 789 in the language / languages: English as an attachment in your email.

The manual is 1,29 mb in size.

 

You will receive the manual in your email within minutes. If you have not received an email, then probably have entered the wrong email address or your mailbox is too full. In addition, it may be that your ISP may have a maximum size for emails to receive.

Others manual(s) of Nivona CafeRomatica 789

Nivona CafeRomatica 789 User Manual - German - 17 pages

Nivona CafeRomatica 789 User Manual - Dutch - 17 pages

Nivona CafeRomatica 789 User Manual - French - 17 pages


The manual is sent by email. Check your email

If you have not received an email with the manual within fifteen minutes, it may be that you have a entered a wrong email address or that your ISP has set a maximum size to receive email that is smaller than the size of the manual.

The email address you have provided is not correct.

Please check the email address and correct it.

Your question is posted on this page

Would you like to receive an email when new answers and questions are posted? Please enter your email address.



Info