717592
11
Zoom out
Zoom in
Previous page
1/37
Next page
Warning: Even if the display does not show “PLEASE CHANGE FILTER’’, the lter must be changed after
two month at latest, even with only a rare use of the appliance.
2.4.2. Operate appliance without lter
If you would like to operate the appliance without filter, the filter setting must be set on “INSERT
FILTER? NO’’. This is important because descaling has to take place more often without a filter,
depending on water hardness (the appliance is delivered with the factory setting “INSERT FILTER?
NO’’!).
Turn the rotary to “NO’’ and press the rotary.
The display shows the setting water hardness.
Information: For production reasons, it may occur at the initial set up that the pipes in the appliance
are still empty. The appliance shows that as follows: The display “PLEASE FILL’’/OPEN VENT’’ appears
after the appliance has been turned on with the On/Off switch (picture 1/H).
Place a big enough container (at least 0,5 l) underneath the steam-hot water jet / the spumatore.
Open the steam- hot water - rotary knob clockwise.
The system is now being filled. Water may emerge from the steam- hot water jet / spumatore
(picture1/P).
Close the steam- hot water - rotary knob anticlockwise.
After the system is heated, the display shows “PLEASE RINSE’’.
Press the rotary.
The display shows “SYSTEM RINSING’’.
When the appliance is ready for use, the display shows the main menu.
2.4.3. Set water hardness
The appliance has to be descaled sooner or later depending on the water hardness in your area.
Sothat the system can display in time when the descaling is required, you must set the appropriate
water hardness prior to the first use.
The basic factory setting for the water hardness is LEVEL 3.
Initially, test the quality of your water with the provided test strip:
Immerse the test strip into the water for a short period and shake it slightly.
After approximately one minute you can read the result, by counting the red dots on the test
strip.
The different levels are split and adjustable as follows:
Test strip / level of hardness = Display
1 red dot / 1–7° = LEVEL 1
2 red dots / 8–14° = LEVEL 2
3 red dots / 15–21° = LEVEL 3
4 red dots / >21° = LEVEL 4
Information: If no dot turns red, set it to level 1.
That is how you set the water hardness for your appliance:
Turn the rotary to your water hardness and press the rotary afterwards to set the level of your
water hardness.
The display shows “PLEASE FILL’/OPEN VENT’’.
Place a big enough container (at least 0,5 l) underneath the steam-hot water jet / the spumatore.
9

2. Set up
11


Need help? Post your question in this forum.

Forumrules


Report abuse

Libble takes abuse of its services very seriously. We're committed to dealing with such abuse according to the laws in your country of residence. When you submit a report, we'll investigate it and take the appropriate action. We'll get back to you only if we require additional details or have more information to share.

Product:

For example, Anti-Semitic content, racist content, or material that could result in a violent physical act.

For example, a credit card number, a personal identification number, or an unlisted home address. Note that email addresses and full names are not considered private information.

Forumrules

To achieve meaningful questions, we apply the following rules:

Register

Register getting emails for Nivona CafeRomatica 680 at:


You will receive an email to register for one or both of the options.


Get your user manual by e-mail

Enter your email address to receive the manual of Nivona CafeRomatica 680 in the language / languages: English as an attachment in your email.

The manual is 7,61 mb in size.

 

You will receive the manual in your email within minutes. If you have not received an email, then probably have entered the wrong email address or your mailbox is too full. In addition, it may be that your ISP may have a maximum size for emails to receive.

Others manual(s) of Nivona CafeRomatica 680

Nivona CafeRomatica 680 User Manual - German - 19 pages

Nivona CafeRomatica 680 User Manual - Dutch - 37 pages

Nivona CafeRomatica 680 User Manual - French - 38 pages


The manual is sent by email. Check your email

If you have not received an email with the manual within fifteen minutes, it may be that you have a entered a wrong email address or that your ISP has set a maximum size to receive email that is smaller than the size of the manual.

The email address you have provided is not correct.

Please check the email address and correct it.

Your question is posted on this page

Would you like to receive an email when new answers and questions are posted? Please enter your email address.



Info