717593
13
Zoom out
Zoom in
Previous page
1/37
Next page
You confirm the chosen setting by pressing the rotary.
By choosing “EXIT’’ and then pressing the rotary, you get to the next menu level above: From the
chosen setting via the menu “SETTINGS’’ to the main menu.
3.1. Set the operation with or without lter
To change the operation to with or without filter, chose the menu option “SETTINGS’’ in the main
menu by turning the rotary and then press the rotary.
Chose the option “FILTER’’ in “SETTTINGS’’ by turning the rotary.
Operate the appliance with filter: Please follow the procedure under point 2.4.1.
Operate the appliance without filter: Please follow the procedure under point 2.4.2
You can carry on directly with the programming of further setting from this position or you can
leave the setting with choosing “EXIT’’ and then pressing the rotary.
3.2. Set water hardness
To change the water hardness, choose the menu option “SETTINGS’’ in the main menu by turning
the rotary and then press the rotary.
Choose the option “WATER HARDNESS’’ in “SETTINGS’’ by turning the rotary.
Please follow the procedure in point 2.4.3 afterwards.
You can carry on directly with the programming of further setting from this position or you can
leave the setting with choosing “EXIT’’ and then pressing the rotary.
3.3. Choose the avour
Depending on your wish, you can choose the flavour. Thus, you can change the flavour of your coffee
as desired. For this, there are three profiles for the flow velocity of the water through the coffee
grounds on file under option “FLAVOUR’’. Profile 1 “DYNAMIC’’ ensures a dynamic flow, Profile 2
“CONSTANT’’ a constant flow and Profile 3 “INTENSE’’ ensures a intensive flow. The factory setting is
“INDIVIDUAL’, viz. you can change your flavour setting individually for each coffee recipe. However,
should you choose a Flavour Profile 1, 2 or 3 at this point, it will apply for all coffee specialities.
Tip: Test your favourite avour prole on one of the beverages.
To change the flavour setting, choose the menu option “SETTTINGS’’ in the main menu by turning
the rotary and then press the rotary.
Turn the rotary to “FLAVOUR’’. Press the rotary.
Turn the rotary to the flavour profile of your choice.
Press the rotary to confirm your setting.
You can carry on directly with the programming of further setting from this position or you can
leave the setting with choosing “EXIT’’ and then pressing the rotary.
3.4. Set temperature
You can set the temperature for coffee, mild and hot water to
“NORMAL”, “HIGH”, “MAXIMUM” or “INDIVIDUAL” as desired. The factory setting is “HIGH’’.
When you have set the temperature as described below, it will apply for all coffee specialities.
However, you can set the temperature to “INDIVIDUAL’ for each coffee speciality (see point 4
below). Then, choose the setting “INDIVIDUAL’ in this menu as follows:
11

3. Take/change basic settings
13


Need help? Post your question in this forum.

Forumrules


Report abuse

Libble takes abuse of its services very seriously. We're committed to dealing with such abuse according to the laws in your country of residence. When you submit a report, we'll investigate it and take the appropriate action. We'll get back to you only if we require additional details or have more information to share.

Product:

For example, Anti-Semitic content, racist content, or material that could result in a violent physical act.

For example, a credit card number, a personal identification number, or an unlisted home address. Note that email addresses and full names are not considered private information.

Forumrules

To achieve meaningful questions, we apply the following rules:

Register

Register getting emails for Nivona CafeRomatica 670 at:


You will receive an email to register for one or both of the options.


Get your user manual by e-mail

Enter your email address to receive the manual of Nivona CafeRomatica 670 in the language / languages: English as an attachment in your email.

The manual is 7,61 mb in size.

 

You will receive the manual in your email within minutes. If you have not received an email, then probably have entered the wrong email address or your mailbox is too full. In addition, it may be that your ISP may have a maximum size for emails to receive.

Others manual(s) of Nivona CafeRomatica 670

Nivona CafeRomatica 670 User Manual - German - 19 pages

Nivona CafeRomatica 670 User Manual - Dutch - 37 pages

Nivona CafeRomatica 670 User Manual - French - 38 pages


The manual is sent by email. Check your email

If you have not received an email with the manual within fifteen minutes, it may be that you have a entered a wrong email address or that your ISP has set a maximum size to receive email that is smaller than the size of the manual.

The email address you have provided is not correct.

Please check the email address and correct it.

Your question is posted on this page

Would you like to receive an email when new answers and questions are posted? Please enter your email address.



Info