51
➔ Then extract the brewing unit care-
fully by the handle (fig. 9).
➔ Wash the brewing unit under runn -
ing water and then let it dry.
➔ Replace and lock the brewing unit
with equal care by pressing the red
lever switch and turning the handle to
the right until it clicks.
➔ Replace the cover and screw the
screws back in.
FROM MODEL NICR 750 ONLY: Your
appliance is equipped with moveable
rear rollers (see image 1/S). This allows
it to be moved easily on a level
worktop. This enables you to clean
underneath the base of the unit both
effortlessly and easily.
... 5. Maintenance and Care
6. System messages
➔ Note: The message “FILL UP BEANS” only disappears
when coffee has been brewed after refilling!
Message
FILL-UP
PIPE-SYSTEM
FILL WATER
FILL UP BEANS
EMPTY TRAYS
➔ Meaning
➔ Fill or rinse out water
hoses (inside)
➔ Fresh water filter in
use may be faulty
➔ Water reservoir (fig. 2)
is empty
➔ Water reservoir (fig. 2)
is absent or incorrectly
positioned
➔ Not enough coffee
beans
➔ Coffee beans do not
fall into grinder (stuck)
➔ Drip tray (fig. 1/Z)
and / or used coffee
tray (fig. 1/U) are full
➔ Contacts on back of
drip tray are not clean
➔ What to do
➔ Turn hot water control
knob(fig. 1/Q and 7)
to the right to open
valve
➔ remove or change
the filter cartridge
➔ Add fresh water
➔ Correctly position
water reservoir
➔ Add beans to the
container (fig. 3)
➔ Stir beans, e.g. with a
spoon, to loosen
➔ Empty drip and / or
used coffee tray
➔ Clean contacts