362642
15
Zoom out
Zoom in
Previous page
1/27
Next page
44
reservoir using the assembly tool on
the end of the measuring spoon.
Fill up the reservoir with fresh
water and put it back in the machine.
Hold a container under the steam /
hot water jet (fig. 1/T) and turn the
control knob (fig. 1/Q and 7) to the
right to open. The system will now be
rinsed out.
Wait until no more water comes out
of the jet for a short time and turn
the control knob (fig. 1/Q and 7) back
to the left to close. (Caution: If water
continues to come out of the jet after
a short while, the system is also ready.
If this occurs, turn the control knob
back to the left anyway.)
The system briefly warms up
(“SYSTEM IS HEATING” appears in
the display), and is then operational
again.
Note: The service button (fig. 1/I)
may still flash. Press the button (fig.
1/I) and the system will briefly be
rinsed out through the coffee spout
(fig. 1/J and 5).
Important: If you use a filter for your
machine and have changed the funct -
ion setting to “FILTER YES” the water
hardness and function will no longer
be shown. Internal device automati-
cally sets the water hardness to Level
1. This means you only need to des-
cale your appliance occasionally –
always when indicated by the messa-
ge on the display and at all times
with the filter removed.
The filter loses its efficiency after pro-
cessing about 50 l of water (for chang-
ing filter, see chapter 5.2).
Caution: If the machine is rarely used
and the “CHANGE FILTER” signal does
not appear in the display, the filter
must be re placed anyway after no
longer than two months (see chapter
5.2 “Washing filter manually”).
Operating without a filter:
If you no longer wish to use a filter, the
filter setting must be changed back to
“FILTER NO”. This is important, as
without a filter the machine must be
descaled more often (the machine is
delivered in the default sett ing “FIL-
TER NO”).
Press the program key P to enter
programming mode.
Press the > key until “PROGRAM
FILTER” appears in the display.
Press the ok key.
Press the > key until “FILTER NO”
appears in the display.
Press the ok key to confirm. The
display reads: “PROGRAM FILTER”.
You can now either continue in pro-
gramming mode to change other func-
tion settings or press exit to leave pro-
gramming mode.
Note: Do not forget to set the water
hardness now (see point 4.3).
4.3 Water hardness
Depending on the water hardness in
your region, also if you have inserted
a filter (see chapter 4.2), the machine
needs descaling sooner or later. So
that the system can indicate correctly
when des caling is necessary, you
must enter the correct water hardness
settings before the first use.
Not during filter use – during ‘opera-
tion with filter’ with the corresponding
programming, the water hardness is
automatically set to Level 1.
The default setting is level 3.
... 4. Programming functions
15


Need help? Post your question in this forum.

Forumrules


Report abuse

Libble takes abuse of its services very seriously. We're committed to dealing with such abuse according to the laws in your country of residence. When you submit a report, we'll investigate it and take the appropriate action. We'll get back to you only if we require additional details or have more information to share.

Product:

For example, Anti-Semitic content, racist content, or material that could result in a violent physical act.

For example, a credit card number, a personal identification number, or an unlisted home address. Note that email addresses and full names are not considered private information.

Forumrules

To achieve meaningful questions, we apply the following rules:

Register

Register getting emails for Nivona cafe romatica nicr 770 at:


You will receive an email to register for one or both of the options.


Get your user manual by e-mail

Enter your email address to receive the manual of Nivona cafe romatica nicr 770 in the language / languages: English as an attachment in your email.

The manual is 0,78 mb in size.

 

You will receive the manual in your email within minutes. If you have not received an email, then probably have entered the wrong email address or your mailbox is too full. In addition, it may be that your ISP may have a maximum size for emails to receive.

Others manual(s) of Nivona cafe romatica nicr 770

Nivona cafe romatica nicr 770 User Manual - German - 29 pages

Nivona cafe romatica nicr 770 User Manual - Dutch - 27 pages

Nivona cafe romatica nicr 770 User Manual - French - 40 pages


The manual is sent by email. Check your email

If you have not received an email with the manual within fifteen minutes, it may be that you have a entered a wrong email address or that your ISP has set a maximum size to receive email that is smaller than the size of the manual.

The email address you have provided is not correct.

Please check the email address and correct it.

Your question is posted on this page

Would you like to receive an email when new answers and questions are posted? Please enter your email address.



Info