15
3.8 Drawing steam / frothing milk
(models 620 and above)
3.8.1 Drawing steam
(models 620 and above)
➔ Press the steam warm-up button
(fig. 1/M).
➔ The On / Off button (fig. 1/E)
lights up and the steam warm-up
button flashes for a brief warm-up
period.
➔ As soon as the steam warm-up
button stops flashing (after a few
seconds), steam can be drawn.
➔ Dip the jet (fig. 1/Q) into the
cup / container with the milk to be
frothed. Make sure the control
knob is in the central position.
➔ Now turn the steam / hot water
valve control knob (fig. 1/N and 5)
to the right. Caution: a little water
comes out before the steam.
➔ The steam warm-up button
(fig. 1/M) flashes while you draw
steam.
➔ Turn the valve control knob
(fig. 1/N and 5) back to the left,
to the ‘0’ position, to stop drawing
steam.
➔ Press the steam warm-up button
again (fig. 1/M and 5) to switch
the machine back to normal coffee
brewing mode.
3.8.2 Frothing milk, hot milk and
cappuccino (models 620 and
above)
With the special ‘spumatore’ froth -
ing device (fig. 1/Q and 10) you
can heat up milk straight from the
carton or bottle and then froth it
into the cup.
➔ Dip the inlet hose (fig. 10/F)
straight into the milk carton or
bottle.
➔ Now place a cup under the
‘spumatore’ jet (fig. 1/Q).
➔ Then press the steam warm-up
button (fig. 1/M).
➔ The On / Off button lights up
(fig. 1/E) and the steam warm-up
button (fig. 1/M) flashes for a
brief warm-up period.
➔ As soon as the steam warm-up
button stops flashing (after a few
seconds), steam can be drawn.
➔ For a cappuccino: turn the spu-
matore control knob (fig. 10a) to
the left so that it points to ‘cap-
puccino’.
➔ For hot milk, turn the spumatore
control knob (fig. 10a) to the right
so that it points to ‘caffè latte’.
➔ Now turn the steam / hot water
valve control knob (fig. 1/N and 5)
to the right. Caution: a little water
comes out before the steam.
... 3. Making coffee
