667851
5
Zoom out
Zoom in
Previous page
1/11
Next page
15 16
17 18
Flash Power can be adjusted manually. The photographer can set the desired
exposure manually by the most appropriate power in combination with the
aperture value set on the camera. 22 different power, from full power to 1/128
power, by every 1/3 stops are available.
Set the camera mode, to or on your camera.
Set the mode of MG8000. From the 6 icons screen, select
M / Av and set .
Select M and set .
Select your desired power and set .
The camera-subject distance for the most proper exposure
is determined by the film speed (ISO) and the F stop set
on the camera.
This distance is shown in the Manual function screen.
The film speed information (ISO) is automatically
transferred from the camera.
The F. stop you set on the camera is to be set maunally on
the flash unit, too.
To get the camera-subject distance on the display screen,
F. Stop setting is required.
Press set for 2 seconds, the screen goes to the
Advanced Function page.
Move cursor to F.Stop line and continuously select
the same F.Stop number you set on your camera.
Press on/off switch to lock the value. (Press it again to
release the lock)
The distance is automatically followed by changing the
focal length and ISO sensitivity level on the camera, or
selecting another power level.
Manual Power Opertion
As for the non-dedicated or traditional type film
cameras, the film speed (ISO) information is not
transferred from the camera.
In this case, the film speed (ISO) is to be set on the
flash unit to indicate the camera-subject distance.
Move cursor to ISO line at Advanced function page
and continuously select the ISO value to which you set camera.
Press the set button. Or wait for 8 seconds to return to M function
screen.
Set
Set
Set
Set
The reflector position of MG8000 can be set manually.
To get an illumination area different from the picture frame either wider or
narrower field, manual zoom setting makes sense. When using MG8000 with
non-dedicated camera or traditional film type camera, the reflector position of
MG8000 does not respond to the camera lens movement. In this case, use this
Manual Zoom Setting.
Manual Zoom Setting
Set
Set
The mode to be set on the camera: or
On the TTL function screen, press the set button for 2
seconds.
TTL Advance page appears.
Select M.Zoom and continuously select on and
set or wait for 8 seconds to returns to the TTL function
screen.
Be aware that now your MG8000 will not adjust the zoom
setting automatically when you change the focal length of your
lens until you will have returned to “M.Zoom Off”on the TTL
Advanced page.
Set
9.0
Advanced custom setting is prepared in this mode.
ADVANCED CUSTOM SETTING
page 14
page 15
Sub Flash Function
Manual Zoom Setting
Universal Slave Function
MG8000 has a universal wireless remote flash system as a slave unit.
You can enjoy creative flash photography with multiple lightings from the
various directions. 2 slave modes are provided in accordance with the flash
system of the master flash.
Slave Digital (SD) for digital pre-flash system and Slave Film (SF) for an
analogue flash system are available.
SD: In this mode MG8000 synchronizes to pre-flash system. The master flash
is to be set at i-TTL mode.
SF: In this mode MG8000 synchronizes to the traditional single flash system.
The master flash is to be set at manual mode. Studio strobe lighting system
synchronizes to this mode. This mode also responds to open flash and to
traditional type flash units in the market.
How to find SD or SF?
Select SD on your slave flash and release your camera’s shutter to flash your
master flash. The slave flash flashes if the Master flash is SD, and does not
flash if the Master flash is SF. If your slave flash is set at SF, it flashes against
both of SF and SD flash system.
To set MG8000 to the slave function mode, move cursor
to Slave line at Advanced function page and continuously
select SD or SF in accordance with the system of the
master flash you set.
page 18
Press the set button or wait for 8 seconds to return to
M function screen.
Set
5


Need help? Post your question in this forum.

Forumrules


Report abuse

Libble takes abuse of its services very seriously. We're committed to dealing with such abuse according to the laws in your country of residence. When you submit a report, we'll investigate it and take the appropriate action. We'll get back to you only if we require additional details or have more information to share.

Product:

For example, Anti-Semitic content, racist content, or material that could result in a violent physical act.

For example, a credit card number, a personal identification number, or an unlisted home address. Note that email addresses and full names are not considered private information.

Forumrules

To achieve meaningful questions, we apply the following rules:

Register

Register getting emails for Nissin MG8000 Extreme - Nikon at:


You will receive an email to register for one or both of the options.


Get your user manual by e-mail

Enter your email address to receive the manual of Nissin MG8000 Extreme - Nikon in the language / languages: English as an attachment in your email.

The manual is 0,93 mb in size.

 

You will receive the manual in your email within minutes. If you have not received an email, then probably have entered the wrong email address or your mailbox is too full. In addition, it may be that your ISP may have a maximum size for emails to receive.

Others manual(s) of Nissin MG8000 Extreme - Nikon

Nissin MG8000 Extreme - Nikon User Manual - German - 11 pages


The manual is sent by email. Check your email

If you have not received an email with the manual within fifteen minutes, it may be that you have a entered a wrong email address or that your ISP has set a maximum size to receive email that is smaller than the size of the manual.

The email address you have provided is not correct.

Please check the email address and correct it.

Your question is posted on this page

Would you like to receive an email when new answers and questions are posted? Please enter your email address.



Info