15005
9
Zoom out
Zoom in
Previous page
1/16
Next page
CAUTION
After making the necessary connections described in Section 2, System Setup, make sure that there is
unrestricted air flow to the Nintendo GameCube. Once the system is properly located, continue with the
instructions below.
Turn your TV on. If the console is connected to
your VCR, turn it on also and set it to "VCR"
mode.
For all of the connection methods except the RF
switch method, you will need to set the
appropriate "Input Select" setting for your TV or
VCR. (Illustration 1)
INPUT SELECT INFORMATION
The input select allows you to switch between
the different inputs on your TV or VCR.
Usually this would be between the Antenna
input and the Audio/Video input(s).
Locate the input select for the component
that the Stereo AV Cable is connected to
(either the TV or VCR). The most common
locations for input select are:
•A button on the front of the TV or VCR.
•A button on the remote control.
•A high-numbered or low numbered channel
(92, 99, 00, or 02) on the TV or VCR.
•An on-screen menu selection.
Manufacturers of TVs and VCRs use different
names and locations for "Input Select". The
common names for the input select are:
input, select, input select, line, line in, source,
in, EXT, and AUX. Consult your TV or VCR
instruction manual for details.
NOTE: More information on "Input Select"
is available on our web site at
www.nintendo.com/consumer/inputselects.html
For the RF switch connection, set your TV
channel to 3 and the switch on the RF Modulator
to 3. If channel 3 has an active television station,
change both switches to channel 4.
Make sure that both the controller and AC
Adapter are properly plugged into the console
and the wall outlet. (Illustration 2)
Press the Open Button to open the Disc Cover.
(Illustration 3)
The Nintendo GameCube has intake/exhaust vents on the right and left sides designed to maintain
adequate ventilation. Do not operate the console in any location where these vents may become
covered or obstructed.
4
5
6
2
3
1
IMPORTANT: Please review the Game Disc
Precautions/Maintenance sections of the
separate Health and Safety Precautions
Booklet included with this product before
using Nintendo GameCube Discs.
Place the Game Disc, printed side up, into the
disc compartment and onto the center hub
(Illustration 4). Do not touch the laser lens.
Close the Disc Cover.
(Illustration 5)
Press the Power Button to turn the power on.
(Illustration 6)
When the power is turned on for the first time,
the Nintendo GameCube logo screen, shown
below, will appear followed by the Main Menu
screen.
NOTE: If you don't see the logo screen on your
TV, review Step 2 or go to the Troubleshooting
section on page 21.
The Main Menu allows you to set the date and
time, see information about the game loaded
into the console, set various options, and
access Memory Card information. See pages
15-20 for instructions on the Main Menu
screens.
5
6
7
2
3
4
3 • SYSTEM OPERATION
3 • SYSTEM OPERATION
Nintendo
GameCube
logo screen
Main Menu
Screen
1312
1
VIDEO
9


Need help? Post your question in this forum.

Forumrules


Report abuse

Libble takes abuse of its services very seriously. We're committed to dealing with such abuse according to the laws in your country of residence. When you submit a report, we'll investigate it and take the appropriate action. We'll get back to you only if we require additional details or have more information to share.

Product:

For example, Anti-Semitic content, racist content, or material that could result in a violent physical act.

For example, a credit card number, a personal identification number, or an unlisted home address. Note that email addresses and full names are not considered private information.

Forumrules

To achieve meaningful questions, we apply the following rules:

Register

Register getting emails for Nintendo GameCUBE at:


You will receive an email to register for one or both of the options.


Get your user manual by e-mail

Enter your email address to receive the manual of Nintendo GameCUBE in the language / languages: English as an attachment in your email.

The manual is 0,96 mb in size.

 

You will receive the manual in your email within minutes. If you have not received an email, then probably have entered the wrong email address or your mailbox is too full. In addition, it may be that your ISP may have a maximum size for emails to receive.

Others manual(s) of Nintendo GameCUBE

Nintendo GameCUBE User Manual - French - 32 pages

Nintendo GameCUBE User Manual - Spanish - 16 pages


The manual is sent by email. Check your email

If you have not received an email with the manual within fifteen minutes, it may be that you have a entered a wrong email address or that your ISP has set a maximum size to receive email that is smaller than the size of the manual.

The email address you have provided is not correct.

Please check the email address and correct it.

Your question is posted on this page

Would you like to receive an email when new answers and questions are posted? Please enter your email address.



Info