673080
8
Zoom out
Zoom in
Previous page
1/12
Next page
7
1-877-646-5288
Using the Nutri Ninja
®
Cup
1 Review warning and caution statements above before
proceeding to number 2.
2 Place the Power Pod on a clean, dry, level surface such
as a counter or table top.
3 Add ingredients to the Nutri Ninja Cup.
NOTE: Do not overll! To avoid spilling, do not add
ingredients past the “Max Fill” line.
4 Place the Nutri Ninja Blade Assembly onto the cup and
screw it tightly until a good seal is achieved. (Fig. 1)
5 Turn the Nutri Ninja Cup upside down and place it onto
the Power Pod. Press down on the Nutri Ninja Cup to
pulse or blend. (Fig. 2, Fig. 3)
6 Once desired consistency is reached, remove pressure from
the Nutri Ninja Cup. Pull straight up to remove. (Fig. 4)
7 Turn the cup upright and remove the Nutri Ninja Blade
Assembly by twisting the blade assembly counter
clockwise.
(Fig. 5)
8 Do not store blended contents with the Nutri Ninja
Blade Assembly attached.
9 Place the Sip & Seal
®
lid onto the Nutri Ninja Cup, twist
to seal and enjoy!
10 For storage, only use Sip & Seal lid to cover.
11 Be sure to store the Nutri Ninja Blade Assembly
attached to an empty cup when not in use.
12 Make sure that the Power Pod is unplugged when not in
use.
NOTE: To order additional Nutri Ninja Cups, please visit
our website: www.ninjakitchen.com or feel free to
contact customer service: 1-877-646-5288.
Fig. 1 Fig. 2 Fig. 3 Fig. 4
For best results when blending drinks or smoothies, press down continuously until desired size
and consistency is achieved. For best results when food processing, use short “PULSES” by
pushing down on the cup in short, 1 second bursts, until desired consistency is achieved.
WARNING: Handle the Nutri Ninja Blade Assembly with care, as the blades are sharp.
WARNING: Remove utensils prior to processing. Failure to remove may cause the Nutri Ninja Cup to be
damaged or to shatter, which may cause personal injury.
WARNING: Never leave the appliance unattended while in use.
CAUTION: Do not blend hot liquids, doing so may cause excessive pressure buildup, resulting in risk of the
user being burned.
CAUTION: Remove the Nutri Ninja Blade Assembly from the Nutri Ninja cup upon completion of blending. Do not
store ingredients before or after blending them in the cup with the blade assembly attached. Some foods may
contain active ingredients or release gases that will expand if left in a sealed container, resulting in excessive
pressure buildup that can pose a risk of injury. For ingredient storage in the cup, use only Sip & Seal Lid to cover.
IMPORTANT: Make sure that the Power Pod is plugged in for use.
Fig. 5
8


Need help? Post your question in this forum.

Forumrules


Report abuse

Libble takes abuse of its services very seriously. We're committed to dealing with such abuse according to the laws in your country of residence. When you submit a report, we'll investigate it and take the appropriate action. We'll get back to you only if we require additional details or have more information to share.

Product:

For example, Anti-Semitic content, racist content, or material that could result in a violent physical act.

For example, a credit card number, a personal identification number, or an unlisted home address. Note that email addresses and full names are not considered private information.

Forumrules

To achieve meaningful questions, we apply the following rules:

Register

Register getting emails for Ninja QB3001 at:


You will receive an email to register for one or both of the options.


Get your user manual by e-mail

Enter your email address to receive the manual of Ninja QB3001 in the language / languages: English as an attachment in your email.

The manual is 1,16 mb in size.

 

You will receive the manual in your email within minutes. If you have not received an email, then probably have entered the wrong email address or your mailbox is too full. In addition, it may be that your ISP may have a maximum size for emails to receive.

The manual is sent by email. Check your email

If you have not received an email with the manual within fifteen minutes, it may be that you have a entered a wrong email address or that your ISP has set a maximum size to receive email that is smaller than the size of the manual.

The email address you have provided is not correct.

Please check the email address and correct it.

Your question is posted on this page

Would you like to receive an email when new answers and questions are posted? Please enter your email address.



Info