716485

Ninja BL682EU2 Manual

28
Zoom out
Zoom in
Previous page
1/93
Next page
54 55
ENGLISH
www.ninjakitchen.eu
Care & Maintenance
HOW TO STORE
1
Store the Nutri Ninja
®
|
Ninja
®
Blender Duo
™
with
AUTO-iQ
™
Technology upright with the blade assembly
inside the corresponding container with the lid secured
on top. Do not place anything on top. Store the rest
of the attachments in a safe place where they will not
be damaged and won’t cause harm.
Loosely wrap the
power cord around the motor base
NOTE:
Do not store blended or unblended ingredients in
the Nutri Ninja Cup with the blade assembly attached.
RESETTING THE MOTOR THERMOSTAT
Store the N
utri Ninja
®
|
Ninja
®
Blender System with
Auto-iQ
®
Technology
features a unique safety system
which prevents damage to the unit’s motor and
drive system should you inadvertently overload your
appliance. If the appliance is being overloaded,
the motor will stop. Allow the appliance to
cool for approximately 15 minutes. To reset the
appliance, follow the resetting procedure below:
1
Unplug the appliance from the electrical outlet.
2
Remove and empty the container and ensure that no
food is jamming the blade assembly.
3
Allow the appliance to cool for approximately 15
minutes.
4
Re-install the container onto the base and re-plug the
appliance into the electrical outlet.
5
Proceed to use the appliance as before making sure not
to exceed the recommended maximum capacities.
HOW TO CLEAN
CAUTION: Make sure that the motor base is
unplugged from the power source before inserting
or removing any attachment and before cleaning.
CAUTION: DO NOT immerse the motor base into
water or any other liquid.
1 Separate/remove all parts from each other.
2 Hand Washing:
Wash the containers, lids, blade
assemblies and attachments in warm, soapy water
.
When washing the blade assemblies, use a dish-washing
utensil with a handle to avoid direct hand contact with
blades. Handle blade assemblies with care to avoid
contact with sharp edges. Rinse and air dry thoroughly.
Dishwasher: The containers, lids, blade assemblies
and attachments are all dishwasher safe. The lids
and blade assemblies are top rack dishwasher safe.
Ensure that the blade assemblies are removed from the
containers before placing in the dishwasher.
WARNING: Handle the blade assemblies with care
when washing, as the blades are sharp. Contact
with the blades’ edges can result in laceration.
3 Wipe the motor base clean with a damp cloth
.
Please call customer service if any servicing needs to
be performed on the appliance at 0800 862 0453.
Troubleshooting Guide
PROBLEMS POSSIBLE REASONS & SOLUTIONS
Motor Doesn’t Start or Blade
Assembly Doesn’t Rotate.
Make sure the container is securely locked into the motor base.
Make sure the lid is securely on container in the correct position (align arrows).
The appliance is turned “Off”. Press the power button (
) to turn “On”.
Check that the plug is securely inserted into the electrical outlet.
Check the fuse or circuit breaker.
The unit has overloaded. The appliance will stop and the power light will flash.
Unplug and wait approximately 15 minutes before using again.
The unit has overheated. Unplug and wait approximately 15 minutes before using again.
Check to make sure the unit is not overloaded.
Food is Unevenly Chopped.
Either you are chopping too much food at one time, or the pieces are not of even
size and processing smaller amounts per batch.
Food is Chopped Too Fine or is
Too Watery.
The food has been over processed. Use Auto-iQ
®
PULSE button for controlled
processing.
Food Collects On Lid or On the
Sides of the Container.
The mixture is too thick. Add more liquid.
You Cannot Achieve Snow
From Solid Ice.
Do not use ice that has been sitting out or has started to melt. Use ice straight
from the freezer.
Start with a few pulses and then go to a continuous blending cycle.
Motor Base Won’t Stick to
Counter or Tabletop.
Make sure surface and suction feet are wiped clean. Suction feet will only stick to
smooth surfaces. Suction feet WILL NOT stick on some surfaces such as, wood,
tile and non-polished finishes.
DO NOT attempt to use appliance when the motor base is stuck to a surface that
is not secure, (cutting board, platter, plates, etc.).
You get an “Err” Message.
Your Ninja
®
is able to detect which jar is on the base. You may be trying to use a
program that is not designed for the jar you have installed. The programs will light
up indicating which programs are available for each jar.
You have a blinking red light.
The unit is not installed properly. For your safety the unit will only be able to be
turned on when it is properly assembled. Please refer to the assembly pages of
this inspiration guide for assistance.
… 28 …


Need help? Post your question in this forum.

Forumrules


Report abuse

Libble takes abuse of its services very seriously. We're committed to dealing with such abuse according to the laws in your country of residence. When you submit a report, we'll investigate it and take the appropriate action. We'll get back to you only if we require additional details or have more information to share.

Product:

For example, Anti-Semitic content, racist content, or material that could result in a violent physical act.

For example, a credit card number, a personal identification number, or an unlisted home address. Note that email addresses and full names are not considered private information.

Forumrules

To achieve meaningful questions, we apply the following rules:

Register

Register getting emails for Ninja BL682EU2 at:


You will receive an email to register for one or both of the options.


Get your user manual by e-mail

Enter your email address to receive the manual of Ninja BL682EU2 in the language / languages: English, German, Dutch, Danish, French, Italian, Swedish, Spanish, Norwegian, Finnish as an attachment in your email.

The manual is 46,75 mb in size.

 

You will receive the manual in your email within minutes. If you have not received an email, then probably have entered the wrong email address or your mailbox is too full. In addition, it may be that your ISP may have a maximum size for emails to receive.

The manual is sent by email. Check your email

If you have not received an email with the manual within fifteen minutes, it may be that you have a entered a wrong email address or that your ISP has set a maximum size to receive email that is smaller than the size of the manual.

The email address you have provided is not correct.

Please check the email address and correct it.

Your question is posted on this page

Would you like to receive an email when new answers and questions are posted? Please enter your email address.



Info