716485
24
Zoom out
Zoom in
Previous page
1/93
Next page
46 47
ENGLISH
www.ninjakitchen.eu
Assembly and Use for the Ninja
®
Blender - cont. Assembly and Use for the Ninja
®
Processor Bowl
NOTE: Nutri Ninja
®
|
Ninja
®
Blender System with
Auto-iQ
®
Technology can sense which jar is on the motor
base. The available function lights will illuminate depending
on which jar is placed on the motor base. (Fig. 1)
1 Review warning and caution statements above before
proceeding to number 2.
2 Place the motor base on a clean, dry, level surface such
as a counter or tabletop.
3 Holding the desired blade by the top of the shaft, place it onto
the drive gear inside the bowl. Ensure that the attachment is
seated properly and is standing upright. (Fig. 2)
NOTE: The blade assembly will fit loosely on the drive gear.
4 Place the motor base on a clean, dry, level surface such
as a counter or tabletop.
5 Align and lower the Processor Bowl onto the motor
base. (Fig. 3) Handle should be aligned slightly to the
right of the “LOCK” symbol on the motor base.
6 Rotate the bowl clockwise until it locks in place, you will
hear a click when the lock is engaged. (Fig. 4)
7 The bowl can be placed on the motor base two ways;
the handle can be on the front right corner or the front
left corner. (Fig. 5a, Fig. 5b)
8 Add the ingredients to the bowl, making sure that they
do not exceed the “MAX” fill line on the side of the bowl.
9 Holding the feed chute lid, place it on top of the bowl and turn
clockwise aligning the arrow located on the lid with the arrow
located on the bowl’s handle. You will hear a click when the
lid is locked in place. (Fig. 6a) The triangles on the lid and
the Processor Bowl handle MUST be aligned in order for the
blender to turn on. (Fig. 6b)
NOTE: The 1.8 L bowl is not intended for blending
drinks. Do not overfill.
10 Plug the power cord into the electrical outlet and press
the power button ( ).
IMPORTANT: As a safety feature, the power button (
) will flash and the motor will not work if the bowl
and lid are not installed correctly. When the bowl and
lid are installed properly, the power button ( ) will be
solid, indicating that the appliance is ready for use.
ASSEMBLY
NOTE: Nutri Ninja
®
| Ninja
®
Blender System with
Auto-iQ
®
Technology can sense which jar is on the motor
base. The available function lights will illuminate depending
on which jar is placed on the motor base. (Fig. 6)
11 Review warning and caution statements at the top of page 45
before proceeding to number 12.
12 Press the power button to turn on the unit. Select
the speed or Auto-iQ program that best suits your
needs. The Auto-iQ program will stop the appliance
automatically at the end of the program. (Fig. 7)
NOTE: Pulse ingredients for even chopping by
holding the Auto-iQ PULSE button until your desired
consistency is reached.
NOTE: Max PULSE iteration is 30 pulses. After 30
pulses allow 10 minutes to pass before running the
PULSE function up to an additional 30 pulses.
13 To pause the appliance, press the selected speed or
Auto-iQ program a second time. When the program is
paused, the light on the program button will flash until
you press it again to resume the rest of the program.
14 When you have reached your desired consistency, stop
the appliance by pressing the power button ( ) and wait
for the Stacked Blade Assembly to stop turning. (Fig. 8)
15 Turn the pitcher anticlockwise to remove and then lift
off the base. (Fig. 9)
CAUTION: Never insert your hands in the pitcher as the
blades are sharp. Always use a spatula to dislodge
food that has stuck to the sides of the pitcher.
16 Open the pour spout cap and use the spout to empty
liquid contents.
17 For thicker consistencies, first remove the lid by
pressing the release button and pulling the lid handle
up to a 90 degree angle to lift lid off the pitcher. Then,
carefully remove the Stacked Blade Assembly by the
top of the shaft. Place Stacked Blade Assembly away
from the work area to avoid accidental contact. Finally,
empty contents from the pitcher. (Fig. 10)
18 Make sure that the unit is unplugged when not in use.
19 To release the motor base from the counter or tabletop,
place your hands underneath both sides of the motor base
and gently pull the unit up and towards you. (Fig. 11)
Fig. 8
USE REMOVAL
Fig. 6
Fig. 9Fig. 7
Fig. 10 Fig. 11
Fig. 5a Fig. 5b
MED
LOW /
DOUGH
Fig. 2
MED
LOW /
DOUGH
Fig. 3
Fig. 1
MED
LOW /
DOUGH
Fig. 4
Fig. 6a
Fig. 6b
WARNING: Chopping Blade Assembly is sharp and not locked in place. Before emptying contents carefully remove lid
and Chopping Blade Assembly, holding it by the shaft. Failure to do will result in risk of laceration.
WARNING: Remove utensils prior to processing. Failure to remove may cause the bowl to be damaged or to shatter,
which may cause personal injury.
WARNING: Never leave the appliance unattended while in use.
CAUTION: Do not blend hot liquids, doing so may cause excessive pressure buildup, resulting in risk of the user being
burned.
IMPORTANT: Make sure that the motor base is plugged in for use.
FROZEN DRINKS
SMOOTHIES
FOOD
PUREE
NutriNinja
NutriNinja
PULSE
HIGH
MED
ON
OFF
1500
WATTS
LOW
AU
TO
AU
TO
AU
TO
A
UTO
BLEND
A
UTO
BLAST
FROZEN DRINKS
SMOOTHIES
FOOD
PUREE
NutriNinja
NutriNinja
PULSE
HIGH
MED
ON
OFF
1500
WATTS
LOW
AU
TO
AU
TO
AU
TO
A
UTO
BLEND
A
UTO
BLAST
FROZEN DRINKS
SMOOTHIES
FOOD
PUREE
NutriNinja
NutriNinja
PULSE
HIGH
MED
ON
OFF
1500
WATTS
LOW
AU
TO
AU
TO
AU
TO
A
UTO
BLEND
A
UTO
BLAST
24


Need help? Post your question in this forum.

Forumrules


Report abuse

Libble takes abuse of its services very seriously. We're committed to dealing with such abuse according to the laws in your country of residence. When you submit a report, we'll investigate it and take the appropriate action. We'll get back to you only if we require additional details or have more information to share.

Product:

For example, Anti-Semitic content, racist content, or material that could result in a violent physical act.

For example, a credit card number, a personal identification number, or an unlisted home address. Note that email addresses and full names are not considered private information.

Forumrules

To achieve meaningful questions, we apply the following rules:

Register

Register getting emails for Ninja BL682EU2 at:


You will receive an email to register for one or both of the options.


Get your user manual by e-mail

Enter your email address to receive the manual of Ninja BL682EU2 in the language / languages: English, German, Dutch, Danish, French, Italian, Swedish, Spanish, Norwegian, Finnish as an attachment in your email.

The manual is 46,75 mb in size.

 

You will receive the manual in your email within minutes. If you have not received an email, then probably have entered the wrong email address or your mailbox is too full. In addition, it may be that your ISP may have a maximum size for emails to receive.

The manual is sent by email. Check your email

If you have not received an email with the manual within fifteen minutes, it may be that you have a entered a wrong email address or that your ISP has set a maximum size to receive email that is smaller than the size of the manual.

The email address you have provided is not correct.

Please check the email address and correct it.

Your question is posted on this page

Would you like to receive an email when new answers and questions are posted? Please enter your email address.



Info