73355

Nilfisk X110 Manual

7
Zoom out
Zoom in
Previous page
1/96
Next page
7
Extreme
DE
FR
ES
I
T
NL
SV
NO
DA
FI
EN
Change of dust bag and fi lters
The size and quality of the dust bag
and fi lters affect the
machine effi ciency. Use of non original
dust bags or non original fi lters can
cause restricted air fl ow which may
lead to machine overload. Using non-
original dust bag or fi lters will void the
warranty.
Changing the dust bag
The dust bag indicator shows when to
change the dust bag.
Always use original dust bags.
1. Release the hose connection from
the suction inlet by turning the
hose connection counter-clockwise
and then remove it.
2. Open the lid by pushing the button.
3. Seal the dust bag by pulling the
cardboard fl ap.
4. Remove the dust bag.
5. Insert the new dust bag by guiding
the cardboard into the tracks and
push it down.
6. Unfold the new dust bag carefully.
Check that the dust bag is correctly
fi tted.
7. Close the lid.
8. Insert the hose connection into the
suction inlet and twist it clockwise
to lock it.
2
Changing the prefi lter
The prefi lter protects the motor by
absorbing micro-particles that the dust
bag can not keep. Change the prefi lter
with every fourth dust bag. The pre-
fi lter is located behind the dust bag.
Always use original fi lters.
1. Release the hose connection from
the suction inlet by turning the
hose connection counter-clockwise
and then remove it.
2. Open the lid by pushing the button.
3. Seal the dust bag by pulling the
cardboard fl ap.
4. Remove the dust bag.
5. Take out the fi lter holder with
prefi lter.
6. Open the fi lter holder.
7. Take out the prefi lter.
8. Fit the new prefi lter and close the
fi lter holder. Check that the prefi lter
is correctly fi tted in the holder.
9. Put the fi lter holder on the pin and
push in place.
10. Insert the new dust bag by guiding
the cardboard into the tracks and
push it down.
11. Unfold the new dust bag carefully.
Check that the dust bag is correctly
fi tted.
12. Close the lid.
13. Insert the hose connection into the
suction inlet and twist it clockwise
to lock it.
3
… 7 …


Need help? Post your question in this forum.

Forumrules


Report abuse

Libble takes abuse of its services very seriously. We're committed to dealing with such abuse according to the laws in your country of residence. When you submit a report, we'll investigate it and take the appropriate action. We'll get back to you only if we require additional details or have more information to share.

Product:

For example, Anti-Semitic content, racist content, or material that could result in a violent physical act.

For example, a credit card number, a personal identification number, or an unlisted home address. Note that email addresses and full names are not considered private information.

Forumrules

To achieve meaningful questions, we apply the following rules:

Register

Register getting emails for Nilfisk X110 at:


You will receive an email to register for one or both of the options.


Get your user manual by e-mail

Enter your email address to receive the manual of Nilfisk X110 in the language / languages: English, German, Dutch, Danish, French, Italian, Portuguese, Swedish, Spanish, Norwegian, Finnish as an attachment in your email.

The manual is 4,54 mb in size.

 

You will receive the manual in your email within minutes. If you have not received an email, then probably have entered the wrong email address or your mailbox is too full. In addition, it may be that your ISP may have a maximum size for emails to receive.

The manual is sent by email. Check your email

If you have not received an email with the manual within fifteen minutes, it may be that you have a entered a wrong email address or that your ISP has set a maximum size to receive email that is smaller than the size of the manual.

The email address you have provided is not correct.

Please check the email address and correct it.

Your question is posted on this page

Would you like to receive an email when new answers and questions are posted? Please enter your email address.



Info