73347
8
Zoom out
Zoom in
Previous page
1/32
Next page
8
PLEASE READ THESE ESSENTIAL INSTRUCTIONS
(Only applicable to UK)
THIS VACUUM CLEANER is designed, developed and
rigorously tested to function efficiently and safely when
properly maintained and used in accordance with the following
instructions. These instructions have been prepared with
safety and efficiency paramount.
THE MACHINE OPERATOR must understand these
instructions for use, and be made aware of any relevant
regulations and legislation in force at the time of use.
CAUTION - This machine is not suitable for use in explosive
or inflammable atmospheres or where such atmospheres
are likely to be produced by the presence of volatile liquid or
inflammable gas or vapour.
CAUTION - In no circumstances should the power supply
cord be wrapped around fingers or any part of the operators
person.
CAUTION - The electrical supply plug must not be subjected
to undue stress by pulling on the power supply cord.
Your MACHINE must only be connected to an electrical
supply of the same voltage and frequency as indicated on
the rating plate. Ensure that the plug fitted to the end of the
power supply cord is suitable for your supply socket, if not
refer to the information contained in 'Electrical Connections',
or consult a qualified electrician. The electrical installation
from which the supply is drawn must be maintained to
current Institute of Electrical Engineers wiring regulations.
REGULAR SERVICING and INSPECTION of your ma-
chine must be carried out by suitably qualified personnel in
accordance with relevant legislation and regulations. In
particular, electrical tests for earth continuity, insulation
resistance, and condition of the flexible cord should be
checked frequently.
In the event of any defect, the machine MUST be withdrawn
from service, completely checked and repaired.
Trained Service Engineers will be pleased to carry out on
site servicing on a regular or as requested basis, to ensure
the continuing safety and efficiency of your machine.
8


Need help? Post your question in this forum.

Forumrules


Report abuse

Libble takes abuse of its services very seriously. We're committed to dealing with such abuse according to the laws in your country of residence. When you submit a report, we'll investigate it and take the appropriate action. We'll get back to you only if we require additional details or have more information to share.

Product:

For example, Anti-Semitic content, racist content, or material that could result in a violent physical act.

For example, a credit card number, a personal identification number, or an unlisted home address. Note that email addresses and full names are not considered private information.

Forumrules

To achieve meaningful questions, we apply the following rules:

Register

Register getting emails for Nilfisk UZ 934 at:


You will receive an email to register for one or both of the options.


Get your user manual by e-mail

Enter your email address to receive the manual of Nilfisk UZ 934 in the language / languages: English, German, Dutch, Danish, French, Italian, Polish, Portuguese, Swedish, Spanish, Norwegian, Finnish as an attachment in your email.

The manual is 0,42 mb in size.

 

You will receive the manual in your email within minutes. If you have not received an email, then probably have entered the wrong email address or your mailbox is too full. In addition, it may be that your ISP may have a maximum size for emails to receive.

The manual is sent by email. Check your email

If you have not received an email with the manual within fifteen minutes, it may be that you have a entered a wrong email address or that your ISP has set a maximum size to receive email that is smaller than the size of the manual.

The email address you have provided is not correct.

Please check the email address and correct it.

Your question is posted on this page

Would you like to receive an email when new answers and questions are posted? Please enter your email address.



Info