Manual Nilfisk UZ 930S (page 7 of 32) (English, German, Dutch, Danish, French, Italian, Polish, Portuguese, Swedish, Spanish, Norwegian, Finnish)

454207

Zoom out

Zoom in

1/32

INSTRUCTIONS FOR USE

1. To open

a)Pull the retaining clips upward and outward .

b)Lift the cover from the container.

2. Dust bag

Fit the opening on the dust bag over the air inlet. Press the

membrane over the flanged edge on the inlet. Secure with the

lock washer. Use only original dust bags.

3. Hose connection

Push the hose coupling all the way in and turn clockwise.

4. Wand assembly

Standard: Fit the sections together and twist to lock in place.

Telescopic: Push down the catch and then adjust the length.

Max.950mm,min.630mm.

5. Tools

The accessories shown in the pictures may vary from model

to model.

a-b)Combination nozzle

Adjust the nozzle according to the requirements of the floor

you are cleaning. Work with the brush on hard floors and

without it on soft floors.

c)Universal nozzle

for both hard floors and carpets.

d)Crevice nozzle

Use to clean furniture, radiators and others hard-to-reach

places.

e)Small combi-nozzle:

The small combi-nozzle combines a dusting brush for furniture,

picture frames, mouldings etc. with a fold-out nozzle for clea-

ning curtains, furniture and other soft surfaces. The clip on the

hose handle holds the nozzle when it is not in use.

f)Brush nozzle for hard floors.

g)Carpet nozzle with thread pick-up

To use the thread pick-up, turn the nozzle.

6. Suction control

The suction control in the hose handle lets you regulate the

air-flow to prevent the nozzles from fastening to the surfaces

you are vacuum cleaning.

7. Start/Stop

a)Foot-operated on/off switch.

b)On the S2 version a separate switch is provided to

change the motor speed .

c)Plug-in point for powered carpet nozzle. Power is sup-

plied to the socket when the machine is switched on.

8. Warning!

Never attempt to vacuum liquid, glass fragments or ashes!

Wet surfaces can expose the operator to possible electri-

cal shock.

9. Filter

The filters are located inside the lid. To reach them lift out

the filter holder(a). The standard filter(b) and fine filter (c)

should be inspected at regular intervals,e.g. when you

change dust bags, and replace if necessary.Instead of

these two filters you can fit a micro filter of HEPA-quality

(e), wich traps 99,99% of all particles larger than 0,3

microns. The machine is also fitted with a backupp filter (d)

located above rhe motor. This filter should also be inspec-

ted and replaced if necessary.

IMPORTANT!

The UZ 930S/S2 is equipped with a specially

designed cable, which if damaged, must be replaced by a

cable of the same type. These cables are avaible at

authorized service shops and must be installed by trained

personnel.

The UZ 930S/S2 is equipped with a thermal cut-out to

protect the motor and other vital machine parts from

overheating. Should the machine cut out, you will have to

wait at least 5-10 minutes for it to automatically reset.

While you are waiting, switch the machine off and unplug

it, then check the hose, dust bag and filters to be sure that

nothing is blocking the flow of air through the machine.

NB!

Remove the plug from the socket before performing serv-

ice or maintenance.

822 2734 000 Instruction for use UZ 930S S2.p65 9/22/2006, 11:02 AM7

Report abuse

Libble takes abuse of its services very seriously. We're committed to dealing with such abuse according to the laws in your country of residence. When you submit a report, we'll investigate it and take the appropriate action. We'll get back to you only if we require additional details or have more information to share.

Product:

Forumrules

To achieve meaningful questions, we apply the following rules:

First, read the manual;
Check if your question has been asked previously;
Try to ask your question as clearly as possible;
Did you already try to solve the problem? Please mention this;
Is your problem solved by a visitor then let him/her know in this forum;
To give a response to a question or answer, do not use this form but click on the button 'reply to this question';
Your question will be posted here and emailed to our subscribers. Therefore, avoid filling in personal details.

new questions and answers
new manuals

You will receive an email to register for one or both of the options.

Get your user manual by e-mail

Enter your email address to receive the manual of Nilfisk UZ 930S in the language / languages: English, German, Dutch, Danish, French, Italian, Polish, Portuguese, Swedish, Spanish, Norwegian, Finnish as an attachment in your email.

The manual is 0,8 mb in size.

You will receive the manual in your email within minutes. If you have not received an email, then probably have entered the wrong email address or your mailbox is too full. In addition, it may be that your ISP may have a maximum size for emails to receive.

The manual is sent by email. Check your email

If you have not received an email with the manual within fifteen minutes, it may be that you have a entered a wrong email address or that your ISP has set a maximum size to receive email that is smaller than the size of the manual.

The email address you have provided is not correct.

Please check the email address and correct it.

Your question is posted on this page

Would you like to receive an email when new answers and questions are posted? Please enter your email address.

Info

Nilfisk UZ 930S Manual

Product: