Manual Nilfisk Supreme 250 (page 12 of 26) (English)

586822

Zoom out

Zoom in

1/26

7 Filter and dust bags - Supreme 150 / Performer 150 / Supreme 250 /

Performer 250 / Supreme LCD

7.3 Replacing the dust bag

The machine is supplied with a dust bag. Replace the dust bag

in the following way:

1. Release the two handles clamped on to the dust container.

The handles are easily unlocked by lifting up the handles un-

til they come to a stop. When you pull the handles outwards

away from the cleaner, the container is released. Fig. 22.

2. Lift off the container.

3. Shake the dust from the bag ﬁ lter. It may be advantageous

for the ﬁ lter to be installed in the container in such a way that

dust in the ﬁ lter can be shaken down into the dust container.

4. Lift out the bag ﬁ lter.

5. Remove the dust bag by taking hold of the cardboard

stiffener and carefully pulling out the card and bag from the

container, Fig. 24. Fold down the perforated part of the card-

board towards the opening of the bag in order to prevent the

bag contents to leak out.

6. Empty the container of dust.

7.1 Replacing the bag ﬁ lter

A bag ﬁ lter must always be installed in the dust container.

Clean the ﬁ lter in the following way:

1. Release the two handles clamping the dust container. The

handles are easily unlocked by lifting up the handles until

they come to a stop. When you pull the handles outwards

away from the cleaner, the container is released. Fig. 22.

2. Do not remove the ﬁ lter from the container. Instead, give the

ﬁ lter a light shaking inside the container to loosen dust from

the ﬁ lter allowing it to fall into the container. This is done by

grasping the strap on the ﬁ lter and quickly move the ﬁ lter up

and down as shown in Fig. 23.

3. Lift out the bag ﬁ lter. If a dust bag is being used - remove the

dust bag. Then empty the container of any remaining dust in

a suitable place.

7.2 Fitting the bag ﬁ lter

Replace the bag ﬁ lter in the machine as follows:

1. Replace the cleaned/shaken bag ﬁ lter in the container. Make

sure the ﬁ lter support ﬁ ts into the inner edge of the dust

container properly. Check that the ﬁ lter is ﬁ tted the right way

up - the cloth handle on the ﬁ lter should be visible.

2. Then replace the dust container with the bag ﬁ lter in the

cleaner’s vacuum unit.

3. Attach the container on the vacuum unit by lifting the con-

tainer back in place and pushing the handles back in over

the edge of the cleaner till you hear a click. Push down the

handles and ensure that the vacuum unit and dust container

are ﬁ tted together properly.

7.4 Fitting the dust bag

Replace the dust bag as follows:

1. Fit the dust bag’s card with a hole into the bag holder, Fig. 25.

2. Replace the cleaned/shaken bag ﬁ lter in the container. Make

sure the ﬁ lter support ﬁ ts into the inner edge of the dust

container properly.

Check that the ﬁ lter is ﬁ tted the right way up - the cloth han-

dle on the ﬁ lter should be visible.

3. Replace the dust container on the vacuum unit. Close the

container on the vacuum unit by applying inward pressure to

the two handles to ensure the vacuum unit and dust con-

tainer are ﬁ tted together properly.

Fig. 22 Fig. 23

Fig. 25

Fig. 24

The Supreme 150 / Performer 150 / Supreme 250 /

Performer 250 / Supreme LCD can be run with or without

the installation of a dust bag - the choice is yours. These

products must though always be operated with the bag

ﬁ lter ﬁ tted in the cleaner.

Report abuse

Libble takes abuse of its services very seriously. We're committed to dealing with such abuse according to the laws in your country of residence. When you submit a report, we'll investigate it and take the appropriate action. We'll get back to you only if we require additional details or have more information to share.

Product:

Forumrules

To achieve meaningful questions, we apply the following rules:

First, read the manual;
Check if your question has been asked previously;
Try to ask your question as clearly as possible;
Did you already try to solve the problem? Please mention this;
Is your problem solved by a visitor then let him/her know in this forum;
To give a response to a question or answer, do not use this form but click on the button 'reply to this question';
Your question will be posted here and emailed to our subscribers. Therefore, avoid filling in personal details.

new questions and answers
new manuals

You will receive an email to register for one or both of the options.

Get your user manual by e-mail

Enter your email address to receive the manual of Nilfisk Supreme 250 in the language / languages: English as an attachment in your email.

The manual is 0,9 mb in size.

You will receive the manual in your email within minutes. If you have not received an email, then probably have entered the wrong email address or your mailbox is too full. In addition, it may be that your ISP may have a maximum size for emails to receive.

Others manual(s) of Nilfisk Supreme 250

Nilfisk Supreme 250 User Manual - German - 27 pages

Nilfisk Supreme 250 User Manual - Danish - 89 pages

Nilfisk Supreme 250 User Manual - French - 25 pages

Nilfisk Supreme 250 User Manual - Swedish, Finnish - 89 pages

The manual is sent by email. Check your email

If you have not received an email with the manual within fifteen minutes, it may be that you have a entered a wrong email address or that your ISP has set a maximum size to receive email that is smaller than the size of the manual.

The email address you have provided is not correct.

Please check the email address and correct it.

Your question is posted on this page

Would you like to receive an email when new answers and questions are posted? Please enter your email address.

Info

Nilfisk Supreme 250 Manual

Product: