586822
9
Zoom out
Zoom in
Previous page
1/26
Next page
41
5 Vacuum unit Supreme 150 / Performer 150 / Supreme 250 / Performer 250 /
Supreme LCD assembly instructions
5.1 Fitting the wall bracket
Plan the positioning of the wall bracket so that there is plenty
of space above and below the area where the vacuum unit is
to be located. Make sure there is a minimum of 200 mm free
space below the dust container.
Mark the positions for all four screw holes with a pen or simi-
lar. The diameter of the holes in the holder is 5 mm. Select
screws and, if necessary, wall plugs suitable for the type of
wall concerned. Drill the four screw holes.
Fit the wall bracket with the large opening pointing down-
wards, see Fig. 15. Then screw the holder rmly into place.
5.2 Locating the vacuum cleaner on
the wall bracket
To facilitate the procedure, rst remove the dust container.
Free the container by pulling both handles outwards. Then
remove the container from the machine.
To mount the vacuum
cleaner/motor chassis to the wall bracket - just lower the chassis
downwards so that the locking device of the bracket will pass
through the slot of the chassis
Fig. 16. Make sure the corre-
sponding bracket on the machine is held rmly in place by
the wall bracket.
When removing the motor chassis from the wall bracket - push
the locking device towards you so it will release the chassis and
then lift the chassis up from bracket.
5.3 Connecting the machine
The machine is connected with the exible suction hose in
the lower position and the exhaust pipe uppermost, Fig 17.
The exible hose is connected to the dust inlet at the con-
tainer of the cleaner.
Push the hose in to the inlet at the cleaner
until the hose locks. Press the button on the hose inlet down-
wards in order to remove the suction hose.
The exible suction
hose acts as an adapter connecting the vacuum unit with the
pipe system.
NB! These connections must not be glued in case the
unit is handed in for service.
Position the central vacuum cleaner so that the exhaust pipe
can be kept as short as possible, maximum. 5 metres. Take
the surroundings into consideration when positioning the
exhaust. For this reason, you should always t a muf er.
For additional information concerning the assembly and
installation of the pipe system and low-current lead, please
refer to the separate assembly instructions supplied with the
pipe package.
Push the hose in to the inlet at the cleaner until the hose locks.
Press the button on the hose inlet downwards in order to remove
the suction hose.
Exhaust
Inlet
Fig. 17
Fig. 15
Fig. 16
9


Need help? Post your question in this forum.

Forumrules


Report abuse

Libble takes abuse of its services very seriously. We're committed to dealing with such abuse according to the laws in your country of residence. When you submit a report, we'll investigate it and take the appropriate action. We'll get back to you only if we require additional details or have more information to share.

Product:

For example, Anti-Semitic content, racist content, or material that could result in a violent physical act.

For example, a credit card number, a personal identification number, or an unlisted home address. Note that email addresses and full names are not considered private information.

Forumrules

To achieve meaningful questions, we apply the following rules:

Register

Register getting emails for Nilfisk Supreme 250 at:


You will receive an email to register for one or both of the options.


Get your user manual by e-mail

Enter your email address to receive the manual of Nilfisk Supreme 250 in the language / languages: English as an attachment in your email.

The manual is 0,9 mb in size.

 

You will receive the manual in your email within minutes. If you have not received an email, then probably have entered the wrong email address or your mailbox is too full. In addition, it may be that your ISP may have a maximum size for emails to receive.

Others manual(s) of Nilfisk Supreme 250

Nilfisk Supreme 250 User Manual - German - 27 pages

Nilfisk Supreme 250 User Manual - Danish - 89 pages

Nilfisk Supreme 250 User Manual - French - 25 pages

Nilfisk Supreme 250 User Manual - Swedish, Finnish - 89 pages


The manual is sent by email. Check your email

If you have not received an email with the manual within fifteen minutes, it may be that you have a entered a wrong email address or that your ISP has set a maximum size to receive email that is smaller than the size of the manual.

The email address you have provided is not correct.

Please check the email address and correct it.

Your question is posted on this page

Would you like to receive an email when new answers and questions are posted? Please enter your email address.



Info