787649

Nilfisk SC2000 Manual

79
Zoom out
Zoom in
Previous page
1/116
Next page
INSTRUCTIONS FOR USE ENGLISH
9100000383 - SC2000 21
01/2015
revised 07/2017
(**) As described in the Use/Operation chapter, set the machine and the on-board battery charger (where fi tted) on the basis of
the type of battery to be installed by modifying the BAT parameter from the table below:
Installed battery type Value
WET Wet cell batteries 0
GEL / AGM Generic GEL or AGM batteries 1
GEL DISCOVER GEL batteries or DISCOVER® brand 2
GEL OPTIMA GEL batteries or OPTIMA™ brand 3
GEL EXIDE GEL batteries or EXIDE®/SONNENSHINE brand 4
GEL FULLRIVER GEL batteries or FULLRIVER® brand 5
Alarms log screen (G, Fig. 8)
This function allows you to check for any stored alarms on the machine.
Use this function only with support from a Nilfi sk Service Centre to solve any
operating problems.
To return to the main screen (E, Fig. 7), press push-button (A) repeatedly.
G
Figure 8
P100870
Operating Time Counter Screen (H, Fig. 9)
This function allows you to check the total accumulated hours of work for each
machine subsystem:
– TOTAL counter (machine running time)
– DRIVE counter (drive system usage time)
– BRUSH counter (brush rotation system usage time)
– VACUUM counter (vacuum system usage time)
To return to the main screen (E, Fig. 7), press push-button (A).
H
Figure 9
P100871
User Key Management Screen (I, Fig. 10)
This feature allows to determine whether the machine can be used with any
user key (factory setting) or only with one or more specifi c user keys.
– Identifi cation of a specifi c user key to be used for the machine:
1. Remove the Supervisor key (if any) from the key reader.
2. Place the user key in the key reader and press the push-button (A).
– Removal of a specifi c user key from the list of keys to be used for the
machine:
1. Remove the Supervisor key (if any) from the key reader.
2. Place the user key in the key reader and press the push-button (B).
– Return to factory setting (any user key enabled for the machine):
1. Remove the Supervisor key (if any) from the key reader.
2. Press the push-button (B).
3. Confi rm the operation by pressing the push-button (A).
To return to the user mode screen, press push-button (C).
To return to the main screen (E, Fig. 7), press push-button (A).
I
Figure 10
P100871
… 79 …


Need help? Post your question in this forum.

Forumrules


Report abuse

Libble takes abuse of its services very seriously. We're committed to dealing with such abuse according to the laws in your country of residence. When you submit a report, we'll investigate it and take the appropriate action. We'll get back to you only if we require additional details or have more information to share.

Product:

For example, Anti-Semitic content, racist content, or material that could result in a violent physical act.

For example, a credit card number, a personal identification number, or an unlisted home address. Note that email addresses and full names are not considered private information.

Forumrules

To achieve meaningful questions, we apply the following rules:

Register

Register getting emails for Nilfisk SC2000 at:


You will receive an email to register for one or both of the options.


Get your user manual by e-mail

Enter your email address to receive the manual of Nilfisk SC2000 in the language / languages: English, German, Dutch, French as an attachment in your email.

The manual is 15.15 mb in size.

 

You will receive the manual in your email within minutes. If you have not received an email, then probably have entered the wrong email address or your mailbox is too full. In addition, it may be that your ISP may have a maximum size for emails to receive.

The manual is sent by email. Check your email

If you have not received an email with the manual within fifteen minutes, it may be that you have a entered a wrong email address or that your ISP has set a maximum size to receive email that is smaller than the size of the manual.

The email address you have provided is not correct.

Please check the email address and correct it.

Your question is posted on this page

Would you like to receive an email when new answers and questions are posted? Please enter your email address.



Info