316111

Nilfisk power 40 Manual

8
Zoom out
Zoom in
Previous page
1/96
Next page
8
Power
DE
FR
ES
PT
I
T
NL
SV
NO
DA
FI
EN
Changing the exhaust fi lter
The exhaust filter is on some variants
of HEPA type (High Efficiency
Particulate Air filter) model.The filter
cleans exhaust air from micro particles
that are not not captured by the
vacuum bag and prefilter. The HEPA
filter or the exhaust filter can not be
brushed or washed clean. Change the
filter at least once per year. Always
use original HEPA filters and exhaust
filters from Nilfisk.
1. Release the lid on the back of the
vacuum cleaner. This is done by
pressing the locking button
upwards. Remove the lid from the
machine.
2. Remove the used HEPA filter.
3. Insert the new HEPA filter.
Do not touch the surface of the
filter. Handle using the plastic
frame that surrounds the filter.
Check that the HEPA filter is
installed correctly.
4. Replace the lid on the machine.
This is done by inserting the flaps
on the top of the lid in the cor-
responding notches on the
machine.
5. Then press the lower edge of the
lid so the lock closes the lid.
Washable HEPA filter
Some models have washable HEPA
filter.
Rinse the inside of the filter using
lukewarm tap water. Do not use any
cleaning agents and avoid touching
the filter surface. Tap the filter frame
to remove the water.
Do not use an external heat source,
e.g. a radiator or direct sunlight to dry
the filter.
Make sure to let the filter dry before
putting it back into the vacuum
cleaner.
D
Adjust the suction power
Suction power is controlled using the
sliding valve on the hose handle.
Suction power is maximal when the
sliding valve is closed and minimal
when open. Adjust the suction power
by moving the sliding valve in
appropriate position.
E
Suction power is also adjusted using
the slide control on top of the vacuum
cleaner. The symbol on the control
indicates the direction for maximum
and minimum suction power.
… 8 …


Need help? Post your question in this forum.

Forumrules


Report abuse

Libble takes abuse of its services very seriously. We're committed to dealing with such abuse according to the laws in your country of residence. When you submit a report, we'll investigate it and take the appropriate action. We'll get back to you only if we require additional details or have more information to share.

Product:

For example, Anti-Semitic content, racist content, or material that could result in a violent physical act.

For example, a credit card number, a personal identification number, or an unlisted home address. Note that email addresses and full names are not considered private information.

Forumrules

To achieve meaningful questions, we apply the following rules:

Register

Register getting emails for Nilfisk power 40 at:


You will receive an email to register for one or both of the options.


Get your user manual by e-mail

Enter your email address to receive the manual of Nilfisk power 40 in the language / languages: English, German, Dutch, Danish, French, Italian, Portuguese, Swedish, Turkish, Spanish, Norwegian, Finnish as an attachment in your email.

The manual is 1,45 mb in size.

 

You will receive the manual in your email within minutes. If you have not received an email, then probably have entered the wrong email address or your mailbox is too full. In addition, it may be that your ISP may have a maximum size for emails to receive.

The manual is sent by email. Check your email

If you have not received an email with the manual within fifteen minutes, it may be that you have a entered a wrong email address or that your ISP has set a maximum size to receive email that is smaller than the size of the manual.

The email address you have provided is not correct.

Please check the email address and correct it.

Your question is posted on this page

Would you like to receive an email when new answers and questions are posted? Please enter your email address.



Info