586821
10
Zoom out
Zoom in
Previous page
1/26
Next page
42
6 Operating instructions Supreme 150 / Performer 150 / Supreme 250 /
Performer 250 / Supreme LCD
1
2
Fig. 19
On/off
hose
Manual
hose
6.1 Starting the machine
The control current outlet (low voltage) is connected to a control
current lead running the length of the pipes. Both ends of the
low-voltage lead should be connected to the connection panel
on the vacuum unit. One lead to each outlet.
The central vacuum cleaner’s power cable must be connected to
a 230 volt mains socket. The appliance is double-insulated and
does not need to be earthed.
Start/stop button
All models have a start/stop button on the front to start
and stop the power unit, Fig. 18. The start/stop button can
also be used when/if you want to use a Nil sk utility inlet to
vacuum direct from the machine (if you do not have a Nil sk
hose with remote control) or for testing and demos.
Manual hose
The vacuum cleaner starts and stops automatically. When
the vacuum hose is connected to a vacuum socket, a metal
ring on the end of the hose closes the control circuit and the
vacuum cleaner starts up. Fig. 19. When the hose is re-
moved from the vacuum socket, the vacuum cleaner stops.
5.4 Utility inlet (Standard accessory in
Canada)
If you need an extra inlet on the machine, you can attach the
utility inlet directly to the inlet on the vacuum cleaner and at-
tach the exible hose to the utility inlet.
The utility inlet can be used with both Manual, On/off and
Wireless hoses. Just connect the vacuum hose to the inlet
and push the on/off button on the cleaner to start vacuum
cleaning.
If the lid is not fully closed when detaching the hose, it will
automatically close next time the cleaner is started.
On/Off hose
Some models have an hose with remote control (on/off function)
for the vacuum cleaner. The hose for these models are to be
connected as shown in Fig. 19. NOTE! The plate at the hose
inlet must be turned upwards, so that the hose inlet will be
locked to the wall inlet by the two notches at the wall inlet.
Wireless handle
If you use a hose with a wireless handle, you can start and stop
the vacuum cleaner using the switch on the handle, Fig. 20.
Wireless handles have also the feature of adjusting the suction
power of the cleaner, using buttons at the hose handle.
6.2 Servicing
Always unplug the power cable before doing any service
work! If suction is poor, it indicates that the ow of air through
the machine is restricted. This may be due to the following:
The dust bag is full and should be replaced.
• The lter is clogged and should be cleaned of dust.
Thermal protector
The vacuum cleaner has a thermal cut-out that trips if the
vacuum cleaner becomes overheated.
Supreme 150 / Performer 150 / Supreme 250 /
Performer 250
If this happens - unplug the main power cord to reset the
vacuum cleaner. Wait 5-10 minutes to allow the machine to
cool down. While you are waiting, check the hose, dust bag
and lter to be sure that nothing is blocking the ow of air
through the machine. The vacuum cleaner should now start
again. If the cut-out trips again, you need to get a service rm
to remedy the fault.
Supreme LCD
When the overheat symbol in the display on the cleaner is
activated (models with display) the cleaners’ thermal cut-out
has tripped. For more information regarding thermal cut out,
see Overheat indicator.
Fig. 20
Wireless Deluxe
Fig. 18
10


Need help? Post your question in this forum.

Forumrules


Report abuse

Libble takes abuse of its services very seriously. We're committed to dealing with such abuse according to the laws in your country of residence. When you submit a report, we'll investigate it and take the appropriate action. We'll get back to you only if we require additional details or have more information to share.

Product:

For example, Anti-Semitic content, racist content, or material that could result in a violent physical act.

For example, a credit card number, a personal identification number, or an unlisted home address. Note that email addresses and full names are not considered private information.

Forumrules

To achieve meaningful questions, we apply the following rules:

Register

Register getting emails for Nilfisk Performer 150 at:


You will receive an email to register for one or both of the options.


Get your user manual by e-mail

Enter your email address to receive the manual of Nilfisk Performer 150 in the language / languages: English as an attachment in your email.

The manual is 0,9 mb in size.

 

You will receive the manual in your email within minutes. If you have not received an email, then probably have entered the wrong email address or your mailbox is too full. In addition, it may be that your ISP may have a maximum size for emails to receive.

Others manual(s) of Nilfisk Performer 150

Nilfisk Performer 150 User Manual - German - 27 pages

Nilfisk Performer 150 User Manual - French - 25 pages


The manual is sent by email. Check your email

If you have not received an email with the manual within fifteen minutes, it may be that you have a entered a wrong email address or that your ISP has set a maximum size to receive email that is smaller than the size of the manual.

The email address you have provided is not correct.

Please check the email address and correct it.

Your question is posted on this page

Would you like to receive an email when new answers and questions are posted? Please enter your email address.



Info