586804
4
Zoom out
Zoom in
Previous page
1/7
Next page
4
Meteor
Original Instructions
grasping the plug, not by pulling at the cable.
Activate the cable rewinder.
3.2 Connecting hose, tube and
nozzles
1. Insert the hose connector into the suction inlet.
2. Connect the bent tube to the tube.
3. Connect the tube to the nozzle.
4. The tube is telescopic and can be adjusted
to your height. Push the adjusting button to
extend the tube and pull back to shorten to
desired length.
Container full indication
On the control panel a lamp is placed, where you
will receive noti cation, when the container is full
or the suction is degraded otherwise.
The dust container must be emptied if the lamp
is constantly on when the machine is operating
at maximum power and the nozzle is raised from
the oor.
3.3 Releasing and emptying of dust
container
The dust container can be separated from the
machine for emptying. Simply release the dust
container from the machine by pressing the but-
tons on the dust container handle (see illustration
below) and pull the dust container upwards. The
dust container can now be emptied in a dustbin,
by pressing the lever marked “Push”.
3.4 Changing the exhaust lter
Open the cover for the exhaust lter, as seen in
the overview image (page 2), replace the lter
with a new one and close the cover again.
3.5 Washing/exchanging the HEPA
lter
You will have access to the HEPA lter when you
have released the dust container.
Rinse the inside of the lter using lukewarm
tap water. Do not use any cleaning agents and
avoid touching the lter surface. Tap the lter to
remove the excess water. Make sure to let the
lter dry before putting it back into the vacuum
cleaner.
If necessary, exchange the lter.
Please note that the machine will not function
without a HEPA lter.
3.6 Parking the tube and nozzle
There are two grooves for parking. One located
on the underside to use when machine stands on
the back, and the other on the back to use when
the machine is standing on the wheels.
3.7 Thermal fuse
The machine is tted with a thermal fuse, which
prevents the machine from overheating. If the
thermal fuse blows, the machine automatically
switches off the motor and must cool before it
can be started again.
Restart
1. Turn off the machine and unplug from the wall
socket.
2. Make sure that nothing blocks the air ow
through the bent tube, hose, tube, nozzle or
lters.
3. Let the machine cool.
4. Plug in the machine again and push the start
button. The machine will not start until cool
enough. If the machine does not start turn it
off and unplug. Try again in a while.
4. Cleaning tips
Adjust the suction power by means of the power
regulation or the sliding valve on the bent tube.
Upholstery nozzle (13)
Use the upholstery nozzle for upholstered furni-
ture.
Brush nozzle (14)
Use the brush nozzle for curtains and window
sills.
Hard oor nozzle (15)
Use the nozzle for hard oors.
On/off
switch
Adjust suction power
Cable
rewinder
Container full
indication
4


Need help? Post your question in this forum.

Forumrules


Report abuse

Libble takes abuse of its services very seriously. We're committed to dealing with such abuse according to the laws in your country of residence. When you submit a report, we'll investigate it and take the appropriate action. We'll get back to you only if we require additional details or have more information to share.

Product:

For example, Anti-Semitic content, racist content, or material that could result in a violent physical act.

For example, a credit card number, a personal identification number, or an unlisted home address. Note that email addresses and full names are not considered private information.

Forumrules

To achieve meaningful questions, we apply the following rules:

Register

Register getting emails for Nilfisk Meteor at:


You will receive an email to register for one or both of the options.


Get your user manual by e-mail

Enter your email address to receive the manual of Nilfisk Meteor in the language / languages: English as an attachment in your email.

The manual is 0,82 mb in size.

 

You will receive the manual in your email within minutes. If you have not received an email, then probably have entered the wrong email address or your mailbox is too full. In addition, it may be that your ISP may have a maximum size for emails to receive.

Others manual(s) of Nilfisk Meteor

Nilfisk Meteor User Manual - Dutch - 8 pages

Nilfisk Meteor User Manual - French - 8 pages


The manual is sent by email. Check your email

If you have not received an email with the manual within fifteen minutes, it may be that you have a entered a wrong email address or that your ISP has set a maximum size to receive email that is smaller than the size of the manual.

The email address you have provided is not correct.

Please check the email address and correct it.

Your question is posted on this page

Would you like to receive an email when new answers and questions are posted? Please enter your email address.



Info