19480
33
Zoom out
Zoom in
Previous page
1/60
Next page
INSTRUCTIONS FOR USE
32401106(1)2004-04 A 3
Grounding instructions
This appliance must be grounded. If it should malfunction
or break down, grounding provides a path of least
resistance for electric current to reduce the risk of electric
shock. This appliance is equipped with a cord having an
equipment -grounding conductor and grounding plug. The
plug must be inserted into an appropriate outlet that is
properly installed and grounded in accordance with all
local codes and ordinances.
MACHINE DATA
Identification data
Always state all the identification data on the machine
whenever you contact Nilfisk-Advance after sales service.
Exact identification of the machine model and serial
number will help prevent incorrect information from being
given.
The identification plate with the machine data is shown in
fig. 1:
AType
B Electrical Power
C Serial number - yywwXXXX
(yy=year ww = week XXXX = number
D Operating Frequency
E Dust class Category
F Ref. number
G Voltage
H Max. Current
I Tot. weight
Main parts
The following list of main parts will help users to
understand the terms used in this manual.
1. Filter shaker handle
2. Filter unit cover
3, Primary filter in synthetic material
4. Exhaust silencer
5. Pressure gauge to monitor filter clogging condition.
6. Waste container
7. Base frame
8. Castors with brake
9. Electric suction motor
10. Electrical panel
11. Main switch
12. Power On indicator
13. ON/OFF button
14. Phase indicator
15. Accessory compartment
16. Connecting pipe
Limiting valve
All models are fitted with an appropriately calibrated relief
valve “1”, to prevents the risks due to operation over long
periods, with the filter completely blocked or clogged
(closed inlet operation).
The valve opens to allow air to pass through the blower to
prevent the impeller from overheating and the electric
motor from absorbing excessive power.
WARNING!
Improper connection of the
equipment-grounding conductor can result
in a risk of electrical shock.
Check with a qualified electrician or service
person if you are in doubt as to whether the
outlet is properly grounded. Do not modify
the plug supplied with the appliance – if it
does not fit the outlet, have a proper outlet
installed by a qualified electrician.
ATTENTION!
Under no circumstances must the user
tamper with the equipment.
All attempts by the user or by unauthorised
personnel to dismantle, modify or, more
generally, tamper with any part of the
vacuum shall void the guarantee. Contact
your nearest After-Sales Service Centre in
the event of faults.
33


Need help? Post your question in this forum.

Forumrules


Report abuse

Libble takes abuse of its services very seriously. We're committed to dealing with such abuse according to the laws in your country of residence. When you submit a report, we'll investigate it and take the appropriate action. We'll get back to you only if we require additional details or have more information to share.

Product:

For example, Anti-Semitic content, racist content, or material that could result in a violent physical act.

For example, a credit card number, a personal identification number, or an unlisted home address. Note that email addresses and full names are not considered private information.

Forumrules

To achieve meaningful questions, we apply the following rules:

Register

Register getting emails for Nilfisk IV150 at:


You will receive an email to register for one or both of the options.


Get your user manual by e-mail

Enter your email address to receive the manual of Nilfisk IV150 in the language / languages: English, German, Dutch, French as an attachment in your email.

The manual is 1,65 mb in size.

 

You will receive the manual in your email within minutes. If you have not received an email, then probably have entered the wrong email address or your mailbox is too full. In addition, it may be that your ISP may have a maximum size for emails to receive.

Others manual(s) of Nilfisk IV150

Nilfisk IV150 User Manual - Italian, Portuguese, Spanish - 60 pages


The manual is sent by email. Check your email

If you have not received an email with the manual within fifteen minutes, it may be that you have a entered a wrong email address or that your ISP has set a maximum size to receive email that is smaller than the size of the manual.

The email address you have provided is not correct.

Please check the email address and correct it.

Your question is posted on this page

Would you like to receive an email when new answers and questions are posted? Please enter your email address.



Info