19222
43
Zoom out
Zoom in
Previous page
1/60
Next page
INSTRUCTIONS FOR USE
32401106(1)2004-04 A 13
Replacing the absolute filter
When installed, the absolute filter is replaced in the
following way:
loosen the clamp fixing the filter assembly on the
machine;
remove suction pipe from the lower spigot;
loosen the clamp fixing the top cover of the absolute
filter chamber;
it will now be possible to remove the absolute filter “1”
and to replace it with a new one;
remount the top cover and fix the clamp;
fix the suction pipe;
fix the filter assembly back into position and tighten the
clamp.
The dismounted and replaced absolute filter must be
covered with a nylon bag and disposed of in the
appropriate way.
Replace the primary filter and the absolute filter with
particular care, above all use the P3-type mask.
Checking the condition of the hoses
To ensure the vacuum operates in the best possible way,
the entire air suction circuit must be perfectly tight.
It is necessary to check the condition of hose “1” that
connects the main filter with the absolute filter chamber.
Check that it is correctly fixed. Check the hose “2”
connecting the absolute filter chamber to the suction
motor, and the hose”3” connecting the suction motor to the
exhaust.
Checking the condition of the
suction fan
Dust deposits could unbalance the fan, creating abnormal
vibrations and quickly wearing the bearings.
Ask for technical assistance from Nilfisk-Advance or one
of the manufacturer’s authorized after-sales service centre
in these cases.
Remember to remove the suction unit from the casing, it
will be necessary to proceed with the aid of lifting means
and safe anchoring.
The unit may weigh as much as 50 Kg.
Periodically check to make sure that there are no dust
deposits on the turbine casing “2” when work is carried out
in particularly dusty environments.
If there is dust or oil mist in the environment, make sure
that the cooling holes of cap “1” do not become clogged.
This could prevent the motor from being efficiently cooled
and lead to activation of the thermal protector or, worse
still, cause the motor to actually break down.
Recommended spares
The following is a list of spare parts that should be kept
ready at hand in order to speed up maintenance work.
NOTE
The absolute filter is toxic waste and must
be treated as such. Hand it over to one of the
authorities authorized to dispose of such
materials.
General recommendation.
Please pay special attention to the
grounding connections when
disassembling and assembling the machine,
when replacing filter etc.
No. Part Name Q.ty
32400868 Soundproof insert for diffuser IV 0551 1
32400874 Soundproof insert for diffuse IV 075 - IV 1101 1
32400880 Soundproof insert for diffuser IV 1502 2
32400344 D 460 Clamp fitting IV 055 - IV 150 1
32400336 D 460 Filter container seal IV 055 - IV 150 1
32400888 D 560 Dust container seal IV 055 - IV 150 1
32400323 Shock absorber for shaking device IV 055 - IV 150 2
32400895 D 560 Clamp fitting IV 055 - IV 150 1
32400898
Polyester standard filter
(depending on variant)
IV 055 - IV 110 1
32400899 PTFE filter (depending on variant) IV 055 - IV 110 1
32400900
Anti-static standard filter
(depending on variant)
IV 055 - IV 110 1
32400901
Anti-static PTFE filter (depending
on variant)
IV 055 - IV 110 1
32400902
NOMEX filter (depending on
variant)
IV 055 - IV 110 1
32400903
Class “M” main filter (depending on
variant)
IV 055 - IV 110 1
32400904
Polyester standard filter
(depending on variant)
IV 150 1
32400905 PTFE filter (depending on variant) IV 150 1
32400906
Anti-static standard filter
(depending on variant)
IV 150
32400907
Anti-static PTFE filter (depending
on variant)
IV 150 1
32400908
NOMEX filter (depending on
variant)
IV 150 1
32400909
Class “M” main filter (depending on
variant)
IV 055 - IV 150 1
43


Need help? Post your question in this forum.

Forumrules


Report abuse

Libble takes abuse of its services very seriously. We're committed to dealing with such abuse according to the laws in your country of residence. When you submit a report, we'll investigate it and take the appropriate action. We'll get back to you only if we require additional details or have more information to share.

Product:

For example, Anti-Semitic content, racist content, or material that could result in a violent physical act.

For example, a credit card number, a personal identification number, or an unlisted home address. Note that email addresses and full names are not considered private information.

Forumrules

To achieve meaningful questions, we apply the following rules:

Register

Register getting emails for Nilfisk IV055 at:


You will receive an email to register for one or both of the options.


Get your user manual by e-mail

Enter your email address to receive the manual of Nilfisk IV055 in the language / languages: English, German, Dutch, French as an attachment in your email.

The manual is 1,65 mb in size.

 

You will receive the manual in your email within minutes. If you have not received an email, then probably have entered the wrong email address or your mailbox is too full. In addition, it may be that your ISP may have a maximum size for emails to receive.

Others manual(s) of Nilfisk IV055

Nilfisk IV055 User Manual - Italian, Portuguese, Spanish - 60 pages


The manual is sent by email. Check your email

If you have not received an email with the manual within fifteen minutes, it may be that you have a entered a wrong email address or that your ISP has set a maximum size to receive email that is smaller than the size of the manual.

The email address you have provided is not correct.

Please check the email address and correct it.

Your question is posted on this page

Would you like to receive an email when new answers and questions are posted? Please enter your email address.



Info