Manual Nilfisk handy (page 8 of 92) (English, German, Dutch, Danish, French, Italian, Portuguese, Swedish, Spanish, Norwegian, Finnish)

320997

Zoom out

Zoom in

1/92

become warm during charging. This is not an

abnormal sign.

5. Waste disposal

• Try to dispose the vacuumed waste as fre-

quently as possible. The dust attached to the

ﬁ lter can cause poor vacuuming performance

and stress the motor.

• Always switch OFF the power when operating

for disposal.

1. Detach the dust container.

2. Pull out the ﬁ lters.

3. Empty the dust container.

4. Re-install the ﬁ lters in correct order and posi-

tion.

5. Re-install the dust container to the vacuum

unit.

Caution

Do not vacuum a lot of dust at one time and do

not vacuum large objects. May cause the suction

port to clog and loose the suction power.

Do not vacuum kerosene, petrol or butts of

smoked cigarettes. This may cause a ﬁ re.

Dispose dust frequently in order not to damage

the product.

6. Service and

Maintenance

Always switch OFF the power and disconnect

the power plug for the battery charger from the

power outlet before starting maintenance.

6.1 Vacuum Unit, Stick Body, Charging Base

Wipe off any dirt from the product using a dry

and soft rag.

In case of stubborn dirt, clean using a soft damp

rag soaked in a water solution diluted with a little

neutral detergent and then wipe with a dry rag.

Do not use solvents like thinner, benzene, and

spray type cleaners.

6.2 Dust Container

Remove any collected dust inside the dust con-

tainer ﬁ rst and wash using lukewarm water.

Make sure that the dust container is completely

dry before re-assembling.

6.3 Filter

Do not wash the ﬁ lters in the washing machine.

Do not dry them using a hot air blower such as a

dryer or a hair dryer.

In case of stubborn dirt or loss in suction power,

wash as instructed below:

1. Remove the dust ﬁ rst

2. Wash with water

3. Make sure that the ﬁ lters are completely dry

before the parts are re-assembled.

6.4 Power Brush

Carry out the maintenance if any waste threads

or hair gets tangled in the brush.

Regular Maintenance

Slowly rotate the brush manually and remove

any foreign objects tangled around the brush.

Maintenance when the power brush cannot

be manually rotated

1. Unscrew the left hand side and then lift and

dislodge the brush cover.

2. Lift up the left side of the rotating brush and

then remove the belt from the end of the

rotating brush.

3. Take out the rotating brush and remove the

blockage. Take out the wastes.

4. Re-install the rotating brush. Finally, check

that the brush cover is securely ﬁ xed and the

rotating brush rotates properly.

7. Product Disposal

When the battery packs will no longer hold a

charge, the product has reached the end of its

useful life.

Before discarding the product, the rechargeable

battery pack must be removed and recycled in

accordance with federal and local laws, as out-

lined below.

NOTE: The battery pack is not replaceable. After

removing the battery pack, the product must be

discarded.

1. Use a screwdriver to unscrew the housing

2. Cut the wires with scissors or wire cutters in

order to free the battery compartment from the

unit completely.

3. Take out the battery compartment with motor,

Unscrew the battery bracket.

4. Remove the battery from the unit. WARNING:

Do not mutilate or incinerate the battery pack,

as it will explode at high temperatures.

Report abuse

Libble takes abuse of its services very seriously. We're committed to dealing with such abuse according to the laws in your country of residence. When you submit a report, we'll investigate it and take the appropriate action. We'll get back to you only if we require additional details or have more information to share.

Product:

Forumrules

To achieve meaningful questions, we apply the following rules:

First, read the manual;
Check if your question has been asked previously;
Try to ask your question as clearly as possible;
Did you already try to solve the problem? Please mention this;
Is your problem solved by a visitor then let him/her know in this forum;
To give a response to a question or answer, do not use this form but click on the button 'reply to this question';
Your question will be posted here and emailed to our subscribers. Therefore, avoid filling in personal details.

new questions and answers
new manuals

You will receive an email to register for one or both of the options.

Get your user manual by e-mail

Enter your email address to receive the manual of Nilfisk handy in the language / languages: English, German, Dutch, Danish, French, Italian, Portuguese, Swedish, Spanish, Norwegian, Finnish as an attachment in your email.

The manual is 0,92 mb in size.

You will receive the manual in your email within minutes. If you have not received an email, then probably have entered the wrong email address or your mailbox is too full. In addition, it may be that your ISP may have a maximum size for emails to receive.

The manual is sent by email. Check your email

If you have not received an email with the manual within fifteen minutes, it may be that you have a entered a wrong email address or that your ISP has set a maximum size to receive email that is smaller than the size of the manual.

The email address you have provided is not correct.

Please check the email address and correct it.

Your question is posted on this page

Would you like to receive an email when new answers and questions are posted? Please enter your email address.

Info

Nilfisk handy Manual

Product: